Professional Documents
Culture Documents
Lab Layout - Junaid Ahmed Siddiqy
Lab Layout - Junaid Ahmed Siddiqy
This instrument is used to measure the centre of pressure of hydrostatic force and its momentum.
2.Francis Turbine.
Water with pressure enters into its casing and helps to rotate the runner.This turbine moves in reaction
of water pressure.
This instrument is used to study the flow measurement and fluid friction in different types of pipes and
pipes fittings.
4.Hydraulic Bench.
Hydraulic bench is used for efficient and controlled water supply to run almost all the instrument.
Impulse of water strike to the caps to rotate the runner of the turbine.
It combines with the hydraulic bench and study the discharge and pressure head characteristics in series
and parallel.
9.Flow Meter.
It is used to find the Reynolds number of different flow condition on the basis of reynold number.We can
differentiate whether the flow is laminar, transitional or turbulent.
11.Venturi Meter.
13.Impact of Jat.
It is used to check the force applied by the jet of water.As it strikes with flat plate, include plate, conical
and hemispherical plate.
14.Orifice Meter.
This instrument is used to measure the coefficient of discharge coefficient of viscosity and coefficient of
contraction.
It is used to measure the metacentric height and the balance of floating body.