Professional Documents
Culture Documents
DIY Tutorial Pallet Bathroom Storage 1001pallets PDF
DIY Tutorial Pallet Bathroom Storage 1001pallets PDF
OVERVIEW
4 PALLETS
4 HOURS
MEDIUM
TUTORIAL
• 4 wooden pallets.
• Meter.
• Tools needed: Saw, Hammer, Nails, Screws, Screwdriver, Square Brackets, Abrasive
Paper, Grinding Machine, Glaze, Paint Brush, Caster Wheels, Handle.
STEP 1
The first step is to dismantle the 4 pallets:
- Version A: with the help of a hammer and a chisel, then remove all the rusty nails OR
- Version B: use an iron saw – faster method but the rusty nails stay in the wood.
STEP 2
You need to cut 8 pieces of 80cm (31,5 in) in the pallet planks. If you have an EURO pallets
(1200mm x 800mm), you only have to select 8 planks from the pallets.
Then, you need to cut:
‣ 40 pieces of 40 cm (15,7 in) and
‣ 2 pieces of 33cm (13 in).
You can saw the long - 120cm - slats in third and the other 80cm slats in half if you use EURO
pallets (1200mm x 800mm).
STEP 3
Before working with the pallet slats, you need first to polish them.
For this, cut a piece of abrasive paper – to make the polishing easiest, use a small slat. For
even easier polishing, you can use a grinding machine.
STEP 4: SIDES X3
In this step, you will assemble the storage sides (X2) and back (X1). Leave 1,5cm (0,59 in) space by
the top of the sides – it’s approximately the thickness of a slat and place eight 40cm slats well-
proportioned on two 80cm slats. Then, fix the 40cm slats onto the two 80cm slats with nails.
STEP 7:
The next step is to paint the surface of the slats with wood stain. We chose a
mahogany color, love it. Wait till the parts are completely dry (it depends on the
wood stain).
In this picture, you can see the 3 sides (left), the front (middle top), the top (middle
bottom), the bottom slats and the inner-part slats not assembled (right).