Professional Documents
Culture Documents
Trademarks
Microsoft®, Windows XP®, Windows Vista®, Windows 7® and Internet Explorer® are trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of AdobeSystems
Incorporated in the United States and/or other countries.
SMV.pdf
Contents
1. System requirements for installation of Service Manual
Viewer ...............................................................................................1
1
Chapter 2 Installation procedure
2-1. Flow of installation
Caution: Start PC with the user who has an administrator.
Start
Yes
Complete
2
2-2. Procedure for installing Service Manual Viewer
Caution: Exit all of other applications before installing.
Some data may be lost because of restarting PC after completing installation.
(1) When you set CD/DVD-ROM into CD/DVD drive, the W/M CD/DVD menu screen (Figure 1) appears
automatically.
Click [Installation] button.
(2) Click Run Mut3Check.exe button if the AutoPlay dialog box is displayed.
3
Note:
If W/M CD/DVD menu screen does not appear, you can double-click [SMVCD_KICK.exe] in the CD/
DVD by using explorer. (Refer to Figure 3)
(3) Click Allow button if the User Account Control dialog box is displayed. Click Yes button if the right User
Account Control dialog box is displayed.
4
(4) Dialog box for confirmation of Service Manual (S/M) Viewer installation (Figure 6) appears. Click Yes.
(5) The dialog box for preparation (Figure 7) appears, and then the next dialog box for welcome (Figure 8)
appears.
5
(6) Select a folder for installation.
(Default : Windows XP -- C:\Program Files, Windows Vista or later -- C:\MUTSW)
When you change the folder, click Browse. Then the window for referring to folders appears. (Figure 9)
Select or enter a folder, and click OK.
6
(8) Select language for use, and click Next.
(9) Installation of the Service Manual Viewer is started. (Refer to Figure 13)
Caution: Wait for a while until setup is completed properly,even if Setup status reached 100%.
7
(10) When the window for completion appears, select ‘Yes, I want to restart my computer now’, and click
Finish. (Refer to Figure 14)
After restarting PC, the shortcut icon appears on the desktop. (Refer to Figure 15)
Double-click the shortcut icon (Figure 15) to start the Service Manual Viewer main menu. (Figure 16)
8
2-3. Procedure for installing Service Manual data
2-3-1. Preparation of installing Service Manual data
If you do not change location for installation, go to ‘2.3.2 Installation of Service Manual (S/M) data’ on page 12.
(1) Double-click the created shortcut icon (Figure 17) on the desktop to start Service Manual Viewer main
menu.
(Refer to Figure 18)
(2) Click Configuration in Service Manual Viewer main menu. (Refer to Figure 18)
9
(3) Click Environment tab, and click Environmental setting change button. (Refer to Figure 19)
OK button
10
(5) Environmental change screen appears. (Refer to Figure 21)
You can set any drive and any directory to install the Service Manual data.
Initial setting is the system default. e.g.: C:\Program files
When you change a local drive, click alphabet in A local drive. (Refer to Figure 21 (a))
When you change a directory, click Directory button (Refer to Figure 21 (b)), then enter directory name
and click OK button. (Refer to Figure 22)
Caution: Make sure that you click OK in order to reflect Environmental change.
(a) (b)
OK button
OK button
11
2-3-2. Installation of Service Manual data
(1) When you set CD/DVD-ROM into CD/DVD drive, the W/M CD/DVD menu screen (Figure 23) appears
automatically.
Click [Installation] button.
(2) Click Run Mut3Check.exe button if the AutoPlay dialog box is displayed.
12
Note:
If W/M CD/DVD menu screen does not appear, you can double-click SMVCD_KICK.exe in the CD/
DVD by using explorer. (Refer to Figure 25)
(3) Click Allow button if the User Account Control dialog box is displayed. Click Yes button if the right User
Account Control dialog box is displayed.
13
(4) Dialog box for confirmation of S/M data installation (Figure 28) appears. Click Yes.
(5) MSB installation will be started continuously. Click Yes, if you want to install MSB into the PC.
(6) If MSB version which has been already installed in the PC is the latest, such a dialog box will be displayed.
(7) When the window for completion appears, press OK to complete the operation.
Remarks
MSB version can be confirmed in the System Information screen.
14
(8) The dialog box for preparation (Figure 33) appears, and then the next dialog box for welcome (Figure 34)
appears.
(9) Start to install Service Manual data. Click Next. (Refer to Figure 34)
15
(10) Select location for installing the Service Manual data.
Go to page 17
Go to page 20.
16
(11) Case 1 - selecting 'Install the DB data and the Service Manual data into a local drive.'
The image of the Service Manual data is as follows. (Refer to Figure 36)
MUT3
DATA
2007 DB
CSS
SCRIPT
IMG
VER
Figure 36
(a) Select “Install the DB data and the Service Manual data into a local drive.”, and click Next.
(Refer to Figure 37)
17
(b) Make sure that the directory for installation is displayed properly, and click Next.
(Refer to Figure 38)
18
Caution:
Just after Setup Status window (Figure 40) is closed, InstallShield Wizard is still displayed
on the task bar. (Refer to Figure 41)
It does not mean PC freezing, so wait for a while.
19
(12) Case 2 - selecting 'Install only the DB data into a local drive.'
The image of installing the Service Manual data is as follows. (Refer to Figure 43)
MUT3
DATA
2007 DB
Figure 43
(a) Select 'Install only the DB data into a local drive.' , and click Next. (Refer to Figure 44)
(b) Make sure that the directory for installation is displayed properly, and click Next. (Refer to Figure 45)
20
(c) After copying files (Refer to Figure 46), Setup Status window appears (Refer to Figure 47).
(d) When the window for completion appears. click Finish. (Refer to Figure 48)
21
Chapter 3 Procedure for uninstalling
3-1. Flow of uninstallation
Start
No
Completed to install Service Manual
(S/M) data
Yes
Yes
Restarting PC.
Complete
22
3-2. Procedure for uninstalling Service Manual data
Caution: Delete Service Manual (S/M) data before deleting S/M Viewer or at re-installing S/M data.
When you do not install the S/M data into a disk drive, this process is not required.
(1) Click Configuration button in SMV(Service Manual Viewer) main menu. (Refer to Figure 49)
(2) Click Data update tab, and then click Service manual button. (Refer to Figure 50)
23
(3) Click Service manual to be deleted button. (Refer to Figure 51)
Delete button
24
(5) The dialog box for confirmation of deletion appears. (Refer to Figure 53)
Click OK. When you cancel, click Cancel button.
Cancel button
OK button
(6) Returns to the screen of the list of installed models. (Refer to Figure 54)
Complete to delete the selected model.
Click and returns to the Configuration menu screen.
25
3-3. Procedure for uninstalling Service Manual Viewer
Caution: (1) Make sure that Service Manual Viewer does not run before uninstalling.
(2) Before uninstalling the Service Manual Viewer, uninstall all of the Service Manual (S/M)
data according to ‘3.2. Procedure of Uninstalling Service Manual data’.
(3) Select Service manual viewer system and click Change/Remove button (WindowsXP) (Refer to Figure
57) or Uninstall/Change (WindowsVista or later) (Refer to Figure 58).
Then, Uninstall Wizard is started.
26
(4) InstallShield Wizard dialog box appears (Figure 59), and then Confirm File Deletion dialog box appears.
(Refer to Figure 60)
(5) When you click OK, Setup Status window (Figure 61) appears and the process of deletion is started.
27
(6) When the process of deletion is completed, InstallShield Wizard Complete window appears.
(Refer to Figure 62)
Click Finish to restart PC.
28
Chapter 4 Instruction of use only for Windows 2000 and WindowsXP
4-1. Valid account in using SMV
Valid account in using SMV is an account of user with authority of the Administrator.
Basically, please log on with the user ID with authority of the Administrator to use SMV.
In case you can't log on with user ID with authority of the Administrator, you can log on and use SMV by the
following procedure.
In case the welcome screen appears on the desktop, press "Ctrl" "Alt" and "Del" for twice, then log on screen
(logon dialogue box) will appear.
On Windows XP, user icons are not displayed on the welcome screen.
29