Professional Documents
Culture Documents
(2) Software
Microsoft Internet Explorer 5.5 or 6.0 or 7.0
Trademarks
Microsoft, Windows2000, WindowsXP, Windows Vista and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States and/or other countries.
Acrobat ® Reader Copyright © 1987-2001 Adobe Systems Incorporated. All rights reserved. Adobe,
Adobe logo, Adobe Acrobat, and Adobe Acrobat logo are trademarks of Adobe Systems
Incorporated.
1
Chapter 2 Procedure for installing
2-1. Flow of installation
Caution: In case of Windows2000, WindowsXP and Windows Vista, installation must be started after
login by a user who has authority of the Administrator.
Start
Yes
Complete
2
2-2. Procedure for installing Service Manual Viewer
Caution: Exit all of other applications before installing.
Some data may be lost because of restarting PC after completing installation.
(1) When you set CD-ROM into CD drive, the W/M CD’s menu screen (Figure 1) appears automatically.
Click [Installation] button. --Go to (2) on this page.
(2) Dialog box for confirmation of Service Manual (S/M) Viewer installation (Figure 4) appears. Click Yes.
3
(3) The dialog box for preparation (Figure 5) appears, and then the next dialog box for welcome (Figure 6)
appears.
4
(5) Select language for introduction, and click Next.
(7) Installation of the Service Manual Viewer is started. (Refer to Figure 11)
Caution: Wait for a while until setup is completed properly,even if Setup status reached 100%.
5
(8) When the window for completion appears, select ‘Yes, I want to restart my computer now’, and click
Finish. (Refer to Figure 12)
After restarting PC, the shortcut icon appears on the desktop. (Refer to Figure 13)
Double-click the shortcut icon (Figure 13) to start the Service Manual Viewer main menu. (Figure 14)
6
2-3. Procedure for installing Service Manual data
2-3-1. Preparation of installing Service Manual data
If you do not change location for installation, go to ‘2.3.2 Installation of Service Manual (S/M) data’ on page 11.
(1) Double-click the created shortcut icon (Figure 15) on the desktop to start Service Manual Viewer main
menu.
(Refer to Figure 16)
(2) Click Configuration in Service Manual Viewer main menu. (Refer to Figure 16)
7
(3) Click Environment tab, and click Environmental setting change button. (Refer to Figure 17)
OK button
8
(5) Environmental change screen appears. (Refer to Figure 19)
You can set any drive and any directory to install the Service Manual data.
Initial setting is the system default. e.g.: C:\Program files
When you change a local drive, click alphabet in A local drive. (Refer to Figure 19 (a))
When you change a directory, click Directory button (Refer to Figure 19 (b)), then enter directory name
and click OK button. (Refer to Figure 20)
Caution: Make sure that you click OK in order to reflect Environmental change.
(a) (b)
OK button
OK button
9
2-3-2. Installation of Service Manual data
Caution: Make sure that there is enough space in the disk drive before installing.
Required disk space for installation of Service Manual (S/M) data is as follows. (Refer to Chart1)
*1: In case that only DB data is installed, CD-ROM must be certainly set to browse the S/M data.
(1) When you set CD-ROM into CD drive, the W/M CD’s menu screen (Figure 21) appears automatically.
Click [Installation] button. --Go to (2) on page 11.
Note:
In case that the above screen is not appeared, right-click on Start at the lower-left corner of the
desktop and click Explore. (Refer to Figure 22)
Then double-click SMVCD_KICK.exe in the CD-ROM. (Refer to Figure 23)
10
(2) Dialog box for confirmation of S/M data installation (Figure 24) appears. Click Yes.
(3) MSB installation will be started continuously. Click Yes, if you want to install MSB into the PC.
(4) If MSB version which has been already installed in the PC is the latest, such a dialog box will be displayed.
Remarks
MSB version can be confirmed in the System Information screen.
11
(6) The dialog box for preparation (Figure 29) appears, and then the next dialog box for welcome (Figure 30)
appears.
Start to install Service Manual data. Click Next. (Refer to Figure 30)
12
(7) Select location for installing the Service Manual data.
Go to page 16
Go to page 14.
13
(8) Case 1 - selecting ‘Only DB data will be installed on the Local.’
The image of installing the Service Manual data is as follows. (Refer to Figure 33)
Appointed location e.g. : C:\Program files
MUT3
DATA
2007 DB
Figure 33
(a) Select ‘Only DB data will be installed on the Local.’, and click Next. (Figure 34)
(b) Make sure that the directory for installation is displayed properly, and click Next. (Figure 35)
14
(c) After copying files (Refer to Figure 36), Setup Status window appears (Refer to Figure 37).
It takes a few minutes.
(d) When the window for completion appears, click Finish. (Refer to Figure 38)
15
(9) Case 2 - selecting ‘All, DB data and HTML documents will be installed on the Local.’
The image of the Service Manual data is as follows. (Refer to Figure 39)
MUT3
DATA
2007 DB
CSS
SCRIPT
IMG
VER
Figure 39
(a) Select ‘All, DB data and HTML documents will be installed on the Local ’, and click Next. (Refer to
Figure 40)
16
(b) Make sure that the directory for installation is displayed properly, and click Next.
(Refer to Figure 41)
(c) After copying files (Refer to Figure 42), Setup Status window appears (Refer to Figure 43).
It takes a few minutes.
Caution: Just after Setup Status window (Figure 43) is closed, InstallShield Wizard is still
displayed on the task bar. (Refer to Figure 44)
It does not mean PC freezing, so wait for a while.
17
(d) When the window for completion appears. click Finish.
18
Chapter 3 Procedure for uninstalling
3-1. Flow of uninstallation
Start
No
Completed to install Service Manual
(S/M) data
Yes
Have an installation CD No
of S/M data
Yes
Restarting PC.
Complete
19
3-2. Procedure for uninstalling Service Manual data
Caution: Delete Service Manual (S/M) data before deleting S/M Viewer or at re-installing S/M data.
When you do not install the S/M data into a disk drive, this process is not required.
(1) Click Configuration button in SMV(Service Manual Viewer) main menu. (Refer to Figure 46)
(2) Click Data update tab, and then click Service manual button. (Refer to Figure 47)
20
(3) Click Service manual to be deleted button. (Refer to Figure 48)
Delete button
21
(5) The dialog box for confirmation of deletion appears. (Refer to Figure 50)
Click OK. When you cancel, click Cancel button.
Cancel button
OK button
(6) Returns to the screen of the list of installed models. (Refer to Figure 51)
Complete to delete the selected model.
Click and returns to the Configuration menu screen.
22
3-3. Procedure for uninstalling Service Manual Viewer
Caution: (1) Make sure that Service Manual Viewer does not run before uninstalling.
(2) In case of Windows2000, installation must be started after login by a user who has
authority of the Administrator.
(3) Before uninstalling the Service Manual Viewer, uninstall all of the Service Manual (S/M)
data according to ‘3.2. Procedure of Uninstalling Service Manual data’.
Uninstallation screen is for Windows2000.
(1) Click Start, Settings and Control Panel on the desktop. (Refer to Figure 52)
(2) Double-click Add/Remove Programs icon in the Control Panel. (Refer to Figure 53)
23
(3) Add/Remove Programs window appears. (Figure 54)
Select Service manual viewer system, and click Change/Remove button.
After clicking, InstallShield Wizard is started. (Refer to Figure 55)
(4) InstallShield Wizard dialog box appears (Figure 55), and then Confirm File Deletion dialog box appears.
(Refer to Figure 56)
24
(5) When you click OK, Setup Status window (Figure 57) appears and the process of deletion is started.
(6) When the process of deletion is completed, InstallShield Wizard Complete window appears.
(Refer to Figure 58)
Click Finish to restart PC.
25
Chapter 4 Instruction of use only for Windows2000
and WindowsXP
4-1. Valid account in using SMV
Valid account in using SMV is an account of user with authority of the Administrator.
Basically, please log on with the user ID with authority of the Administrator to use SMV.
In case you can't log on with user ID with authority of the Administrator, you can log on and use SMV by the
following procedure.
In case the welcome screen appears on the desktop, press "Ctrl" "Alt" and "Del" for twice, then log on screen
(logon dialogue box) will appear.
On Windows XP, user icons are not displayed on the welcome screen.
26