Professional Documents
Culture Documents
, LTD
12N50 Preliminary Power MOSFET
FEATURES
* 12A, 500V, RDS(ON)=0.54Ω @ VGS=10V
* High Switching Speed
* 100% Avalanche Tested
SYMBOL
2.Drain
1.Gate
3.Source
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
12N50L-TA3-T 12N50G-TA3-T TO-220 G D S Tube
12N50L-TF1-T 12N50G-TF1-T TO-220F1 G D S Tube
Note: Pin Assignment: G: Gate D: Drain S: Source
www.unisonic.com.tw 1 of 6
Copyright © 2011 Unisonic Technologies Co., Ltd QW-R502-528.a
12N50 Preliminary Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified)
PARAMETER SYMBOL RATINGS UNIT
Drain-Source Voltage VDSS 500 V
Gate-Source Voltage VGSS ±30 V
Continuous (TC=25°C) ID 12 * A
Drain Current
Pulsed (Note 1) IDM 48 * A
Avalanche Current (Note 1) IAR 12 A
Single Pulsed (Note 2) EAS 684 mJ
Avalanche Energy
Repetitive (Note 3) EAR 19.5 mJ
Peak Diode Recovery dv/dt (Note 3) dv/dt 4.5 V/ns
TO-220 192
TC=25°C W
TO-220F1 42
Power Dissipation PD
TO-220 1.53
Derate above 25°C W/°C
TO-220F1 0.33
Junction Temperature TJ +150 °C
Storage Temperature TSTG -55~+150 °C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
* Drain current limited by maximum junction temperature
THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
TO-220 62.5
Junction to Ambient θJA °C/W
TO-220F1 62.5
TO-220 0.65
Junction to Case θJC °C/W
TO-220F1 3.0
VGS
Same Type
as DUT
QG
12V
10V
200nF
50kΩ VDS QGS QGD
300nF
VGS
DUT
3mA
Charge
VDS EAS= 1
2 LIAS
2 BVDSS
BVDSS-VDD
RG BVDSS
ID
L IAS
10V ID(t)
tP DUT
VDD VDD VDS(t)
Time
tP
DUT +
RG VDS
L
-
ISD
VGS
VDD
Driver
Same Type
as DUT
dv/dt controlled by RG
ISD controlled by pulse period
IRM
VDS
(DUT) Body Diode Recovery dv/dt
VSD VDD
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.