Professional Documents
Culture Documents
Guloane Hitlti X-HVB-Direct-Fastening-2018 PDF
Guloane Hitlti X-HVB-Direct-Fastening-2018 PDF
95
2
52
50 24.3
25.8
99 Ø4.5
Ø15
12/2017 www.hilti.group 89
X-HVB
Applications
Examples
Typical application of
X-HVB shear connector
with steel deck, e.g. new
construction.
Typical application of
X-HVB shear connector
with jack arch system
(without steel deck), e.g.
rehabilitation project.
“Duckwalk”
Characteristic and design resistance (ETA-15/0876) in composite beams with solid slabs
*) R
eduction to 6 mm possible, with regards to required reduction of design resistance see annex C3 of
ETA-15/0876.
Conditions:
• Normal weight concrete C20/25 to C50/60
• Light weight concrete LC20/22 to LC50/55 with a minimum density ρ = 1750 kg/m³
9012/2017
www.hilti.group
X-HVB
Design resistance in composite beams with decking ribs transverse to beam axis
𝑃𝑃𝑃𝑃𝑅𝑅𝑅𝑅𝑅𝑅𝑅𝑅,𝑡𝑡𝑡𝑡,𝑙𝑙𝑙𝑙 = 𝑘𝑘𝑘𝑘𝑡𝑡𝑡𝑡,𝑙𝑙𝑙𝑙 ∙ 𝑃𝑃𝑃𝑃𝑅𝑅𝑅𝑅𝑅𝑅𝑅𝑅
X-HVB positioning Design Resistance PRd,t [kN] Ductility assessment
0.66 𝑏𝑏𝑏𝑏0 ℎ𝑆𝑆𝑆𝑆𝑆𝑆𝑆𝑆
𝑘𝑘𝑘𝑘𝑡𝑡𝑡𝑡,𝑙𝑙𝑙𝑙 = 𝑃𝑃𝑃𝑃 ∙ =∙ 𝑘𝑘𝑘𝑘 ∙ 𝑃𝑃𝑃𝑃 − 1 ≤ 1.0
𝑟𝑟𝑟𝑟 ℎ𝑝𝑝𝑝𝑝
𝑛𝑛𝑛𝑛𝑅𝑅𝑅𝑅𝑅𝑅𝑅𝑅,𝑡𝑡𝑡𝑡,𝑙𝑙𝑙𝑙 ℎ𝑝𝑝𝑝𝑝 𝑅𝑅𝑅𝑅𝑅𝑅𝑅𝑅
𝑡𝑡𝑡𝑡,𝑙𝑙𝑙𝑙
𝑏𝑏𝑏𝑏0 ℎ𝑆𝑆𝑆𝑆𝑆𝑆𝑆𝑆
𝑘𝑘𝑘𝑘𝑙𝑙𝑙𝑙 = 0.6 ∙ ∙ − 1 ≤ 1.0
ℎ𝑝𝑝𝑝𝑝 ℎ𝑝𝑝𝑝𝑝
Conditions:
• Applicable for X-HVB 80, X-HVB 95, X-HVB 110, X-HVB 125, X-HVB 140
• X-HVB are to be positioned parallel with beam
12/2017 www.hilti.group 91
X-HVB
Design information
Application requirements
Thickness of base material
For beams with composite decking:
tII,min minimum thickness tII = 8 mm.
92 www.hilti.group 12/2017
X-HVB
Positioning of X-HVB connectors with composite deck (deck positioned transverse to;
and X-HVB positioned parallel with beam axis)
Spacing and positioning
12/2017 www.hilti.group 93
X-HVB
Positioning of X-HVB connectors with composite deck (deck and X-HVB positioned
transverse to beam axis)
Spacing
2 rows:
• at ≥ 100 mm for all types decking
3 rows:
• at ≥ 50 mm for compact profiled decking
with b0/hp ≥ 1.8
• at ≥ 100 mm for other decking
Preferred position in
compression zone of
Center in rib concrete rib
Positioning of X-HVB connectors with composite deck (deck parallel with beam axis)
• If a centric positioning within the concrete rib is not possible due to the shape of the composite decking,
the decking needs to be split.
9412/2017
www.hilti.group
X-HVB
“Duckwalk” positioning of X-HVB 40 and 50 in combination with thin solid slabs for
renovation construction
Application limits
Application limits are valid only if correct cartridge and power setting are used!
Application limits X-ENP-21 HVB Cartridge preselection and power setting
! !
%DVHPDWHULDOWKLFNQHVV>PP@
%DVHPDWHULDOWKLFNQHVV>PP@
%ODFN %ODFN
$SSOLFDEOHUDQJH
RI
EDVHPDWHULDOV
%ODFN
5HG
6 %ODFN
6
5HG 5HG
6
6 6
%DVHPDWHULDOVWUHQJWK5P >1PPð@ 6WHHOJUDGH
12/2017 www.hilti.group 95
X-HVB
Fastener selection
X-HVB
𝑏𝑏𝑏𝑏𝑏𝑏𝑏𝑏𝑜𝑜𝑜𝑜 𝑜𝑜𝑜𝑜 𝑏𝑏𝑏𝑏𝑜𝑜𝑜𝑜 𝑏𝑏𝑏𝑏𝑏𝑏𝑏𝑏 𝑏𝑏𝑏𝑏 𝑏𝑏𝑏𝑏𝑏𝑏𝑏𝑏𝑜𝑜𝑜𝑜 𝑜𝑜𝑜𝑜 𝑏𝑏𝑏𝑏𝑜𝑜𝑜𝑜
≥ 1.8
≥≥1.8
1.8 1.01.0
1.0 << 𝑜𝑜𝑜𝑜<𝑜𝑜𝑜𝑜<ℎ<1.8
𝑜𝑜𝑜𝑜
< 1.8
1.8 ≤ 1.0
≤≤1.0
1.0x)x) x)
ℎℎ𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝 ℎ𝑝𝑝𝑝𝑝 ℎℎ𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝 𝑝𝑝𝑝𝑝 ℎℎ𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝 ℎ𝑝𝑝𝑝𝑝
80 45 45 30
95 60 57 45
110 75 66 60
125 80 75 73
140 80 80 80
x)b0 / hp ≥ 1.0 for composite decking perpendicular to beam
combined with X-HVB orientation parallel with beam
Fastening inspection
hNVS
X-HVB
Metal decking
Structural steel
9612/2017
www.hilti.group