Professional Documents
Culture Documents
2014 - Baja SAE India CostReportTemplate
2014 - Baja SAE India CostReportTemplate
-The objective of the cost report is to report the cost value (suggested retail price) of the items selected
to build the car. The objective is not to report the cheapest price that an item can be purchased. For
example, if two schools are using the same Gear Box they both should be reporting the same price,
even though they might have purchased them for different prices, since both schools get the same
value from the Gear Box.
-The cost report should serve as two functions, (1) a bill of materials for the car, and (2) it should help
equalize teams that choose to use items of high value with teams that use items of low value.
-In industry it is very important to look at design and performance, as well as cost. Cost is the key
driving force to many design decisions. If shocks are selected that cost Rs 1,00,000 the team should
understand it will loose points in cost, but it might improve the score in the dynamic events. During
design presentations these cost decisions should be discussed.
Common Mistakes
- Teams did not use the correct template; the only template that is allowed is the template which posted
for that year. If you submit an older template you will receive a score of 0.
- Teams found prices at discount companies that were not suggested retail prices. Remember to use
the current retail price of all parts.
- Teams did not get signatures on the summary cost page. It is required that you print out the summary
cost with captain and advisor approval signatures. This must be scanned and placed in the PDF as
page #1.
Submission of reports
All reports MUST be done using that year's template. Only one electronic copy will need to be
submitted by each team and this will be for all competitions in which the team is competing. The
template must be submitted as an Excel file (.xls or .xlsx). Do not add pictures, drawings or other
things that make this file larger.
All supporting documents (i.e.: scanned copy of the summary cost sheet with signature, cost overview,
cost sheets, pictures, ,receipts, drawings) should be included in the .PDF file. Only .PDF file will be
scored.
These files must be titled as specified in the rules. File size of PDF and EXCEL put together should not
exceed 6 MB
If the cost of your vehicle changes after you have submitted your cost report, then at registration you
must submit a "Cost Adjustment Form". When submitting this form you must have receipts or form
"B" attached for each changed item. See the rules for more details on the Cost Adjustment form.
Retail List Prices should not include sales tax, VAT taxes or packaging and shipping costs from the
seller to the team's shop – provided such items are itemized separately and not built into the retail
price.
Cost Documentation – “Cost Documentation” can be any of the following: (a) Receipts or
invoices for the items as purchased, (b) Catalog pages showing the items and price, (c) On-line
prices, (d) Quotations from a manufacturer or fabricator, or (e) Price tags provided that original
tag identifies the item to which it was affixed.
All cost documentation must be dated either as part the document itself or, in the case of undated
references, e.g. catalog pages, price tags, by writing a date on the submission.
Purchased Items – Use the Retail List Price (Suggested Retail Price)
Contributed, Discounted and Sale Items – Use the Retail List Price. Even if you bought the part on
sale or at a discount use the Retail List Price - do not use the sale or discount price.
Custom Manufactured Items – Use a quotation showing the Retail List Price. Manufacturer’s
quotations must be based on the price the company would charge a typical customer - not on any
special price given to your team.
Reused, Salvaged Items or items purchased from auction sites – Use the current Retail List Price
for the item. If you are reusing a part that is no longer in production, then you must provide cost
documentation for the nearest equivalent item that is currently available. For example: if you are
reusing a brake light that’s no longer made, then you may substitute the price for an equivalent item
that’s available.
Foreign Purchased Items – If the item or similar item is available in the India use the retail price
published in the India. If the item is not available in the India then find an item that is similar in
function, size and durability. (OR use currency conversion rate as specified in rule book appendix).
Important Note – Keep in mind that the cost report is based on retail list price and is therefore
somewhat artificial. The cost report total price is likely to be considerably higher than your actual
production budget.
***Make sure to read the cost guide which is included in this file on the next worksheet.***
Format
This year's cost report will be a 3 level bill of materials with standardized summaries in the 12 major
cost areas. The 3 levels consist of:
-Level 1(a) is the "Summary Cost" worksheet
-Level 1(b) Overview (optional)
-Level 2(a) is the group of 12 Form "A" worksheets. Each of these sheets come preloaded with a
reasonable number of lines which may be adjusted as required.
-Level 2(b) is the group of 12 Form "B" worksheets. Note that each of these worksheets may have
multiple items.
-Level 3 cost documentation
Documentation
Receipts, catalog pages, or other documentation of cost must be included in the .PDF. To help make
the documentation clear and readable, each receipt must have the appropriate final cost circled. Each
receipt should also have the section title, Form A line number, and Form B (if needed) line number
clearly marked. All of these receipts must be included in the .PDF file. Documentation should be in the
same order as presented in the report. For example, all the engine documentation first, followed by
the transmission documentation, etc.
Be careful not to 'CUT' items or drag and drop. Use 'COPY' functions. Failure to do so may lead to
dropped links to the final worksheet.
There are two ways to calculate part costs on Form B: you can enter Density, Amount, Weight, and
Rs/Unit, and the final cost will be calculated for you. Alternatively, you can leave the Density column
blank and the cost will be calculated on the basis of Amount, and Rs/Unit.
There may be some cases where the cost calculation does not fit your situation. Use your preferred
calculation method, highlight the calculation in light yellow, and provide an explanation at the bottom of
that page (Insert blank lines as required).
The Amount should be the gross amount of material you started with, not the finished amount of
material in the finished part. i.e. If you machine a full transmission case, use the weight of the starting
billet, not the final case.
Be careful not to 'CUT' items or drag and drop. Use 'COPY' functions. Failure to do so may lead to
dropped links to the matching Form A.
Check Page size, orientation and page break to ensure proper print/pdf
Sample
There is a sample pair of Form A and Form B at the start of the worksheets. They are identical to the
others with the exception that they do not roll up to the final worksheet.
2. Receipts for all components over Rs. 200 (Indian Rupees) must be included.
(A) The receipts must be numbered and labeled, and included in the .PDF file.
(B) The full retail cost of parts must be used in the Cost Report. Discounted or wholesale prices are not to be used. If a p
donated or discounted, the full retail cost for the part must still be used (or a part of similar specification).
(C) The supplier/retailer’s phone number must be included with each receipt.
(D) If the actual receipt for a part is not available, a photocopy of a page from a catalog of the part in question will be acc
(E) Receipts that are dated less than three (3) years prior to the Competition, i.e. no older than 3 years, are valid. Part p
for that year (year of competition). (Provide current year quotations for the previous years purchased parts used in th
with previous years original receipt. Use current years quote for cost calculations.)
(F) For foreign purchased parts, if current year quotations are not available then use the currency conversion ra
rule book appendix.
3. All modified purchased parts should use full retail cost, plus the cost of the modifications taken from the Operations C
the rule book appendix.
4. Fabricated/Manufactured parts use the cost for the basic material from the Materials Cost Table (refer rule book, appe
the weight must include any scrap from cutting or machining. If the material is not listed in the table then a receipt for
provided. The cost for making the part will then be added using the rates from the Operations Cost Table (refer rule boo
5. Fabricated/Manufactured parts do not include design or setup time for your manufacturing, actual run time only.
Base
Labor
Cost = 50 (Indian Rupees)
2014 Baja SAE Cost Adjustment Form This fo
somep
of your
registra
Make s
Car Number 1234 manufa
Total Cost (Rs) purcha
0
Sect #
Item
1 Engine
2 Transmission
3 Drive Train
4 Steering
5 Suspension
6 Frame
7 Body
8 Brakes
9 Safety Equipment
10 Electrical Equipment
11 Fasteners
12 Miscellaneous
Team Captain:
Financial Head:
Level 1 Summary
2014 Baja SAE Official Costing Sheet
1234
XYZ
25000.00
Description
Engine, Engine Mountings, Engine Subframe, Fuel Tank, Exhaust System, Catalytic Convertor, Engine Oil,
Gearbox, Clutches, Accelerator Pedal, CVT, Shift Mechanisms, Transmission Oil etc.
Drive Shafts, Bearings, Axles, Tyres, Rims, Hub, etc.
Steering Wheel, Intermediate Shafts, Gear Box, Tie Rods, etc.
A Arms, Spindles, Shock Absorbers, Springs, etc.
Structural Members, Roll Cage, Mounts, Firewall, Seat, etc.
Outer Covering, Fenders, Skid Plates, etc.
Mech/Hyd. Components, Pedals, Lines, Fittings, Fluid, etc.
Kill Switch, Fire Extinguisher, Safety Harness, etc.
Battery, Starter, Cables, Wiring, Safety Device, etc.
Nuts, Bolts, Spring Washer, etc. (don't include fasteners in each subassembly, put the QTY of each various
Paint, Trim, etc. and other items.
Date:
sting Sheet
Approval Date:
Revision: A
Sample Subsystem Form A
Purchased
Fabricated
Material
Item Part Name Vendor Qty Cost
1 Roll Cage and rear frame X 1 134.53
2 Seat Mounting X 1 2.75
3 Bushings X MISC 1 100.00
4
5
6
7
8
9
This is the time it takes to assemble all of the
Subsystem Assembly Time (minutes) 5 Subsystem Assy Cost
items in this subassembly together. For
Totals example, this would be time it takes to mount
splash guard to engine.
Linked to sheet B
ExtendedTotal
Material Cost
Labor Cost
Extended
Linked to sheet B
Labor Cost
5,625.00 134.53 5,625.00 5,759.53
512.00 2.75 512.00 514.75
0.00 100.00 0.00 100.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00 Labor Cost (Su
0.00 0.00 0.00 assembly)
0.00 0.00 0.00
Labor Cost (Su
s to assemble all of the
bly together. For 4.17 4.17 assembly)
time it takes to mount 237.28 6,141.17 6,374.28
.
Total: 6,378.45
Linked to sheet B
m total cost
labour
assy cost)
Engine Subsystem Form B
Line 1 on Sample Subsystem Form A
Description: Roll Cage and rear frame
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1 Cut Pipes 957.00 cm 5.00
2 Bending 6.00 bend 40.00
3 Radiusing at ends 60.00 end 10.00
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1 Cut pipes 32.00 cm 5.00
2 Cut plates 16.00 cm 5.00
3 Radiusing at ends 2.00 end 10.00
4 Drill Holes 4.00 hole (light) 3.00
5 Weld plates 48.00 cm 5.00
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
131.25
3.28
134.53
Cost (Rs)
4785.00
Refer Standard manufacturing pro
240.00
600.00
(Process+Labor) specified in Rule C
0.00
0.00
0.00
5625.00
For Labor cost other than manufac
134.53
operations e.g. material handling, as
5625.00
5759.53 etc. to be considered from 1st row o
Cost (Rs)
0.68
2.07
2.75
Cost (Rs)
160.00
80.00
20.00
12.00
240.00
0.00
512.00
2.75
512.00
514.75
Cost (Rs)
100.00
0.00
100.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
100.00
0.00
100.00
ufacturing process cost
ified in Rule C 4.7
than manufacturing
al handling, assembly helper
rom 1st row of C4.7
Engine Subsystem Form A
Use fixed cost Rs. 25000/-
ExtendedTotal
for Baja SAE 2014
Material Cost
compition
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 Engine X 1 25,000.00 25,000.00 0.00 25,000.00
2 Engine Mountings X 0.00 0.00 0.00
3 Drive Shaft X 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
This is the time it takes to assemble all of the
7 items in this subassembly together. For
0.00 0.00 0.00
8 example, this would be time it takes to mount 0.00 0.00 0.00
9 splash guard to engine. 0.00 0.00 0.00
Total: 25,000.00
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Transmission Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Transmission Subsystem Form B
Line 1 on Transmission Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 1
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 2
Line 3 on Transmission Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 3
Rs/Unit Cost (Rs)
0.00
0.00
Subtotal: 0.00
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Drive Subsystem Form B
Line 1 on Drive Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 1
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 2
Line 3 on Drive Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 3
Rs/Unit Cost (Rs)
0.00
0.00
Subtotal: 0.00
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Steering Subsystem Form B
Line 1 on Steering Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly To
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly To
Line 3 on Steering Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly To
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Suspension Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Suspension Subsystem Form B
Line 1 onSuspension Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 1
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 2
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line 3
Rs/Unit Cost (Rs)
0.00
0.00
Subtotal: 0.00
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Frame Subsystem Form B
Line 1 on Frame Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line
Line 3 on Frame Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit
1
2
3
4
5
6
To Form A Line
Weight Rs/Unit Cost (Rs)
0.00 0.00
0.00 0.00
Subtotal: 0.00
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Body Subsystem Form B
Line 1 on Body Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Line 3 on Body Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Brakes Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Brakes Subsystem Form B
Line 1 on Brakes Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Line 3 on Brakes Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Safety Equipment Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Safety Equipment Subsystem Form B
Line 1 on Safety Equipment Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Line 3 on Safety Equipment Subsystem Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Electrical Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Fasteners Subsystem Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00
2 0.00 0.00
3 0.00 0.00
4 0.00 0.00
5 0.00 0.00
6 0.00 0.00
7 0.00 0.00
8 0.00 0.00
9 0.00 0.00
Total: 0.00
Miscellaneous Items Form A
ExtendedTotal
Material Cost
Labor Cost
Purchased
Fabricated
Extended
Material
Item Part Name Vendor Qty Cost Labor Cost
1 0.00 0.00 0.00
2 0.00 0.00 0.00
3 0.00 0.00 0.00
4 0.00 0.00 0.00
5 0.00 0.00 0.00
6 0.00 0.00 0.00
7 0.00 0.00 0.00
8 0.00 0.00 0.00
9 0.00 0.00 0.00
Total: 0.00
Miscellaneous Items Form B
Line 1 on Miscellaneous Items Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 1 Subassembly Total
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 2 Subassembly Total
Line 3 on Miscellaneous Items Form A
Description: (From Sheet "A")
Material:
Item
Labor:
Manufacturing Process Amount Unit Rs/Unit
1
2
3
4
5
6
Subtotal:
Material Total
Labor Total
To Form A Line 3 Subassembly Total
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
Cost (Rs)
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Cost
Rs0.00
Rs0.00
Rs0.00
Cost
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00
Rs0.00