Professional Documents
Culture Documents
Power Supply Vesda PDF
Power Supply Vesda PDF
VESDA
ACCESSORIES
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Power Supply
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
LaserCOMPACT
VPS-100US-XXX provides power for: up to 2
LaserCOMPACT detectors, or up to 5 Remote
(Single Box) Units, or 1 Subrack assembly.
Battery requirements: (2) 12volt/12 Amp-hour
batteries.
Components:
OUTPUTS
The VPS-100US consists of three main components:
-
the mounting enclosure, the transformer, and the +
OUT 1
G L N
TRANSFORMER
POWER - 1 2 0 VA C
main circuit board. It uses two backup batteries (sup- LIMITED OUT 2
A CA C
+
OUTPUTS DESIGNATIONS
plied separately). -
+
OUT 3
24 VDC
ARE NORMALLY
ENERGIZED
VLPPS
SUPERVISED POWER
Input:
120 VAC/60 Hz; 1.4 amp max. VPS - 100US
Output:
27.6 VDC (normal)
Max. Total Available Output Current: 1.5 amps 5/8"
B AT T E RY B AT T E RY
Max Output Current when only single circuit is used:
12V/12AH 12V/12AH
+
24VDC
1.2 amps
-
Max Output Current when all 3 outputs are used: 1/4"
500mA/circuit
Dimensions (WHD):
13.9 in. x 9 in. x 4.5 in.
Weight:
VPS-100 US 10 lbs. without batteries B AT T E RY B AT T E RY
VBC-001 6 lbs. without batteries 12V/12AH 12V/12AH
Operating Temperature:
Power Supply Ambient: 32° to 120°F
3/4"
Humidity: 10 - 95%RH, non-condensing 5/8"
EQUAL
Cable Termination: (2) 1 in.
C
KNOCKOUTS
Screw terminal blocks (1) TOP (1)
BOTTOM
30-12 AWG (TYPICAL)
TERMINAL BRACKET
EQUAL
P/N DESCRIPTION REQUIREMENTS D D
G
E
F D
120 or 220 VAC TERMINAL
EQUAL
BRACKET
VPS-300US-XXX Power Supply Specify Voltage
LEFT SIDE RIGHT SIDE
Model VPS-100US-XXX 120 or 220 VAC
and Battery Cabinet
model VBC-001
B
Dimensions
VBT-012 Battery, sealed Minimum of in
lead acid, 12 VDC 2 required
EQUAL
A 13.750
12 Amp/hr
B 8.875
C 4.500
D .625
E .875
FRONT VIEW
F .375
G .1875
H .687
I 1.000
J 1.375