Professional Documents
Culture Documents
CameraSupports
Benbo . . . . . . . . . . . . . . . . . . 404-405
Billingham . . . . . . . . . . . . . . . . . . 406
Bogen-Manfrotto . . . . . . . .407-420
Cullman . . . . . . . . . . . . . . . . .421-424
Gitzo . . . . . . . . . . . . . . . . . . .425-435
Linhof . . . . . . . . . . . . . . . . . . 436-441
Majestic . . . . . . . . . . . . . . . . 442-444
Slik . . . . . . . . . . . . . . . . . . . . 445-450
Velbon . . . . . . . . . . . . . . . . . .451-457
Brom . . . . . . . . . . . . . . . . . . 458, 462
Arca-Swiss . . . . . . . . . . . . . . .459-460
Bilora . . . . . . . . . . . . . . . . . . . . . . .460
Foba . . . . . . . . . . . . . . . . . . . 461-462
Schoon . . . . . . . . . . . . . . . . . . . . . 462
Sachtler . . . . . . . . . . . . . . . . . . . . 462
Kaiser . . . . . . . . . . . . . . . . . . . . . . 463
Stroboframe . . . . . . . . . . . . . . . . 464
Graf (Studio Ball) . . . . . . . . . . . 465
NPC . . . . . . . . . . . . . . . . . . . . . . . . 466
Miscellaneous . . . . . . . . . . . . . . . 467
B E N B O
T R I P O D S
Benbo tripods are uniquely designed with the outdoor photograph-
CAMERA SUPPORTS
Benbo
er in mind. Unlike conventional tripods, Benbo tripods can be set up Tripod #2
Extra Large
and used on any terrain, under any conditions, in an unlimited range
of configurations.
Most photo tripods open up to a single fixed angle - which is fine in
the studio, but a problem when shooting outdoors. Although the envi-
ronment cannot be altered to one that suits your tripod, you can
change your tripod to one that suits any environment! Benbo tripod
legs open independently to any angle, even right down to the ground.
The camera column goes up, down, and all the way around. Controls
are simple and oversized for a sure grip. Construction is of anodized,
404
FEATURES
Tripod Legs
#7 Trekker 35 (B1007)
#2 XL Extra Large (B1002) Ideal for 35mm cameras with lenses up to 210mm.
Item # BEBXL..............................................................................231.50 Item # BET35...............................................................................158.95
CAMERA SUPPORTS
Model #1 #2 XL #4 EL #7 TREKKER 35
Load Capacity 10-20 lbs. 10-20 lbs. 10-25 lbs. 10 lbs.
Minimum Usable Height 0 0 0 0
Maximum Extension 62˝ (158cm) 97˝ (247cm) 45˝ (114cm) 64˝ (163cm)
Leg Sections 2 2 2 2
Center Column Sections 1 1 1 1
Folded Length 33˝ (84cm) 45˝ (114cm) 25˝ (64cm) 28˝ (71cm)
Weight 7.5 lbs. (3.5kg) 8.25 lbs. (3.75kg) 6 lbs. (2.75kg) 4.5 lbs. (2kg)
Subject to change without notice
405
Ideal head for Benbo tripods, monopods or other brand tripods. 2˝ diameter camera platform sits atop a Benbo monopods combine the
1.5˝ ball joint that is precision-engineered and machined for smooth operation and non-slip locking. outdoor-inspired practicality of
Professional 3⁄8˝ socket with removable 1⁄4˝-20 conversion insert. Available in standard (fixed base) con- Benbo tripods with the compact-
figuration (Cat # B3001) weighing 15 oz. (425g). ness and convenience of a
monopod. Lower legs overlap
Standard Ballhead (B3001) upper sections, as on the three-
Item # BEBHS ..................65.95 legged version, so working in
Benbo #1 water or mud is no problem.
Benbo Standard
Standard Ballhead
Standard with Panorama Revolving Trekker Monopod (B2000)
Ballhead Base (B3004) Featherweight two-section
(B3001) monopod based on rigid
Item # BEBHSP..............109.95
Trekker leg design. Also con-
Trekker Pan-Ballhead (B3000) verts to walking stick. Its maxi-
mum height is 601⁄2˝ (154cm),
Designed for use with the closed length 34˝ (87cm).
Trekker tripod and monopod, Weighs 10 oz. (539g).
the Trekker Pan-Ballhead Item # BEMPT .................46.95
weighs just 8.5 oz. (240g),
yet is strong enough to Benbo 95-XL (B2001)
support heavy, professional Maximum height is 68˝
35mm cameras. Standard (173cm), closed length 371⁄2˝
Benbo (95cm). Weighs 2 lbs. (.9k).
1
⁄4˝-20 threaded mounting Get Closer! The camera
Trekker-Pan Item # BEMP95XL ...........68.99
Ballhead (B3000)
socket and locking panorama column acts as an extension
base. rail vertically or horizontally
Item # BEBHT..................96.95
Benbo
Trekker
Monopod
Tripods with Heads (B2000)
precision. Legs are made of ash (timber tree), and heads are
made of cast aluminum. Together these materials have little
tendency to whip or twist, ensuring a stable camera platform.
Ash has a natural tendency to absorb vibrations. Its straight
grain makes it immensely strong. Seasoned ash sections are cut
and machined with precision, prompting them to slide togeth-
er easily. A final coating is applied which protects the surface
from ravage weather, yet allows the ash to breathe.
FEATURES
406
■ Rubber booted ground spikes for rough or ■ Override button allows legs to be splayed
smooth terrain. for rough terrain.
■ Vibration absorbing ash legs, weather- ■ Reporter models have 23˝ swivelling head
proofed and comfortable to hold. with a built-in spirit level.
■ Solid cast aluminum head construction. ■ Reporter model center column can be
reversed for suspending camera under the
■ Standard 1⁄4˝ or 3⁄8˝ thread. tripod.
Hawk 276 Tripod Natural Reporter 355 50˝ Tripod Reporter 371 70˝ Tripod Horizontal Bar (735601)
Finish (733045) Natural Finish (731045) Natural Finish (731545) All models can accept the
2-column tripod with one sec- 3-column tripod with 2-section 3-column tripod with 2-section Horizontal bar for ground level
tion center column. center column. center column. photography. The bar can be
Item # BITH276N..........299.00 Item # BITR355N ..........359.00 Item # BITR371N ..........399.00 stored in the central column
when not required.
Hawk 276 Tripod Black Finish Reporter 355 50˝ Tripod Black Reporter 371 70˝ Tripod Black Item # BIEA......................79.00
(733001) Finish (731001) Finish (731501)
Same as above, in black finish. Same as above, in black finish. Same as above, in black finish. 2-Dimension Tripod Head (735001)
Item # BITH276B ..........329.00 Item # BITR355B...........399.00 Item # BITR371B...........449.00 Item # BITH2D..............329.00
CAMERA SUPPORTS
broad selection of tripods, manufactured in Italy by Manfrotto. Each
tripod is available with a wide choice of heads, dollies and performance-
enhancing accessories so you can select the combination that best
fits your working patterns. All Bogen tripods use hard-finish,
high-strength aluminum alloys. That is one reason why they resist
wear and remain rigid and stable with heavy use and abuse. All
models employ a clamping system for leg length adjustment that
resists fouling and scoring and stays secure even under rough field Basic
Tripod
conditions. And the legs are keyed internally to keep the locks (3011)
aligned and accessible.
Bogen tripods feature a unique locking system to make sure
407
that you do not remove the head unless you want to (with the
exception of the Junior Tripod #390, which has a permanently
mounted head.). Most models use a 3⁄8˝ (Euro) thread connec-
tor, 50% larger and much stronger than the 1⁄4˝ thread you’ll
find on most tripods. Whether it is features or performance you
are seeking, Bogen offers both.
Tripod Legs
Convertible Tripod (3001) Convertible Tripod Black (3205) Convertible Tripod Long (3001LC) Basic Tripod Black (3211)
The lightest and smallest tripod Same as above, in black finish. The same as the 3001 tripod, Same as above, in black finish.
in the Bogen line. The legs are Item # BO3001B...............73.90 with extra long center column. Item # BO3011B...............86.90
made of sturdy, tubular hard- ITEM # BO3001LC ..........64.95
finish aluminum and each leg Convertible Tripod Short (3001S) Convertible Tripod (3021S)
has sure-grip, quick-acting A short version of the 3001. Convertible Very versatile. No matter
lever locks that don’t foul in Item # BO3001S ...............69.95 Tripod Long Black (3205LC) where you want to place your
sand or mud. Legs have three Same as above, in black finish. camera - indoors or outdoors,
different separately settable Convertible ITEM # BO3001BLC........79.95 rough terrain or smooth floor,
click-stopped spread angles for Tripod Short Black (3205S) the Convertible Tripod will
easy levelling. Same as above, in black finish. Basic Tripod (3011) accommodate you. It features
Item # BO3001 .................60.95 Item # BO3001SB.............69.95 The Basic Tripod offers flip-lock levers for precise
exceptional stability and height adjustment. It has three
T R I P O D W I T H H E A D weighs just 51⁄4 lbs. With different click-stopped spread
Bogen’s professional quality, angles, as well, so levelling is
Junior Tripod #390 (3405) the 3011 offers high utility easy no matter how rough the
With quick release head. The only Bogen tripod combined with simplicity of going gets. Equally important,
with a built-on head. The 4-leg section tripod has use and easy portability. It is it is ideal in confined areas
octagonial legs and a center column. The 2-way compact - yet it goes up to 60˝ where other tripods normally
head features quick-release and 360° panning. and has a reversible center have to maintain an arm’s or
Perfect for cameras and video cameras weighing post that lets you shoot at leg’s distance. Folds to 17.5˝
less than 11 lbs. (5kg.) Maximum extension is almost ground level. Sturdy, and extends to 44.5˝.
62.6˝ (159cm). The mimnimum usable height is tubular aluminum legs have Item # BO3021S ...............89.95
0˝ by reversing the center column. Folds to 22˝ sure-grip, quick-acting lever
(56cm). Weighs 4.2 lbs. (1.9kg). locks, ideal for cameras up to Convertible Tripod Black (3221S)
Item # BO3405 ....................................89.95 medium format. Same as above, in black finish.
Item # BO3011 .................73.95 Item # BO3021SB...........101.95
Same as 3221 with foam rubber matic safety lock with push
covered upper legs and spiked
button release. Most impor-
feet for greater grip stability.
tantly, this tripod maintains its
Item # BO3221W ...........139.95
stability at all heights. Stability
is enhanced by independent
Professional Tripod (3033)
variable-spread leg braces that
Most lightweight tripods are a bit
allow you to obtain different
shaky when extended beyond
three feet. Not the Professional Tripod. It is lightweight, yet can look angles on each leg. The three
you steadily in the eye and give support for great, vibration-free legs are continuously
shots. Ideal for location shooting where you need a compact, sturdy adjustable in relation to each
tripod. It has 3-section legs and a geared center post, which means it other. A real plus where a level
provides good maximum working height (67˝). It then telescopes head is needed, it features a
into a really manageable package for carrying. Leg adjustment is fast built-in spirit level. Its con- The Work Horse
and easy, even when wearing gloves, due to the exclusive rocker arm vertible cushion/spike tip legs Tripod Black (3236)
leg lock and a spirit level on the shoulder. Convertible cushioned give you sure footing indoors Same as the Work Horse
spike tip legs and rigid center bracing hold everything firm. or out. Tripod 3036 in black finish.
Item # BO3033 ...........................................................................144.95 Item # BO3036 ...............159.95 Item # BO3036B.............172.90
CAMERA SUPPORTS
The Sturdy Tripod (3046) The Automatic (3051)
The Sturdy Tripod weighs just Extension of each leg of The
81⁄4 lbs., yet has the features and The The Automatic can be adjusted
strength normally found only Super Pro Automatic individually, or all three can be
in 20 pounders. It is built with (3058) (3051) released simultaneously. All it
a 2-section bi-post design, shown with takes is firm pressure on one of
lightweight aluminum alloy #3047 Head two separate sets of triggers.
construction and exceptional These triggers let you move
sturdiness. A single, easy to from as low as 153⁄4˝ to 631⁄4˝
reach locking knob controls almost as fast as you can lift
extension of each leg. Geared your camera. And it can all be
193⁄4˝ center post has threaded done with a spirit level on the
3
⁄8˝ mount on the bottom of the 3051’s shoulder. Legs are
column to allow low angle The
equipped with convertible
shots. Maximum height is Sturdy Tripod cushion/spike tips.
409
681⁄2˝, yet it folds to a compact (3046) Independent continuously
341⁄4˝. Minimum height is 29˝. variable leg braces let you set
Legs are equipped with each leg at a different angle.
convertible cushion/spike tips. Ideal for uneven terrain, close
Includes built-in shoulder spir- quarters, low to the ground,
it level. just about everything.
Item # BO3046 ...............139.95 Item # BO3051 ...............181.95
The Sturdy Tripod (3246) The Automatic (3251)
Same as above, in black finish. Same as above, in black finish.
Item # BO3046B.............152.90 Item # BO3051B.............194.90
Pan Heads
All pan heads fit any Bogen tripod, or any tripod with 3⁄8˝ Euro thread. Pan heads screw right on and can also be locked in with the three locking
screws in the center post platform of the tripod base.
3-D Head (3025) Pan Tilt Head (3029)
Separately locked movements on three axes make the 3025 A beautifully designed easy-to-use
perfect for 35mm cameras, and the conical self-adjusting pan/tilt head, with large knobs for cam-
bearing surfaces on the tilt pivots provide more than eras up to medium format. Full 3-way
enough strength to support medium format cameras. Super action with each axis movement con-
Item # BO3025.........................................................29.95 3-D Head trolled by a separate locking handle.
3-D Head (3028) Item # BO3029 .............................37.95
Super 3-D Head (3028) (3025)
The same three axes movement system as the 3-D Pan Tilt Head
Head 3025, (including a pan lock), but the camera with Quick Release (3030)
platform is a bit wider for better support of larger The #3030 is similar to the #3029 Pan
camera bodies. A pair of ratchet-type handles that give Tilt Head, plus it has a quick release to
you something substantial to grip can be rotated to make camera changes as easy as flip-
any desired position. ping a lever.
Item # BO3028.........................................................29.95 Item # BO3030 .............................44.95
Deluxe 3-Way Pan Head (3047) Quick Release Plate (3157) Quick Release Plate (3412) Quick Release Plate (3297)
With Quick Release Plate Replacement mounting plate Same as #3411 with 3/8˝ Euro Replacement 4x4˝ plate with 1⁄4-
#3049. Ideal for all 35mm, with 1⁄4-20˝ thread. Fits the Thread. Fits #3410 head. 20˝ thread. Fits #3057.
medium format and view cam- 3030, 3130, and 3160 heads, Item # BO3412 .................11.95 Item # BO3297 .................37.95
eras. It features a hexagonal and 3405 tripod.
quick release plate with safety Item # BO3157 ...................9.95
lock, two bubble levels and
three large, easy-grip rubber Quick Release Plate (3157A)
handles for precise positioning. Same as #3157, with 3⁄8˝ Euro
Mounting plate has an inlaid thread. Fits the 3030, 3130 and Super
friction surface. 3160 heads and 3405 tripod. Pro Head (3039)
Item # BO3047 .................59.95 Pan Tilt
Item # BO3157A.................9.95 Head
Replacement Handles (3291) (3029)
Quick Release Plate (3049)
For Deluxe 3-Way Pan Head. Replacement plate with 1⁄4-20˝
410
CAMERA SUPPORTS
Compact Gear Head #410 (3275) Deluxe Geared Head (3263) Quick Release Mounting Plate Quick Release Mounting Plate
With Quick Release Plate With 13, 23 and 42mm high 13mm High (3264L) 23mm High (3264M)
#3271 (with 1⁄4-20˝ screw and quick release plates. Designed Replacement for the Deluxe Replacement for the Deluxe
3
⁄8˝ Euro thread). Especially especially for large and medi- Geared Head (3263). Geared Head (3263).
designed for 35mm SLR and um format cameras,offering Item # BO3264L...............12.50 Item # BO3264M .............12.50
medium format cameras, this the ultimate in precision 3-way
compact geared head uses easi- geared adjustment and control. Quick Release Mounting Plate 44mm High (3264H)
ly adjustable knobs and offers Exclusive self-locking fold- Replacement for the Deluxe Geared Head (3263).
precise geared movement in away cranks allow 360° pans, Item # BO3264H ..........................................................................12.50
three directions: Pan 360°, Tilt +30° and -90° tilts. The Deluxe
+30° to -90°, and side-to-side Geared Head features a com-
+30° to -90°. This professional fortable grip handle that lets Deluxe Geared
head has a large camera plat- you level ±7.5° side to side Head (3263)
form, a levelling bubble and a with a bubble level to aid in
quick release plate with both precise positioning. To help
3
⁄8˝ and 1⁄4-20˝ camera screws you mount your camera quick-
411
that travel in a 2˝ slot to facili- ly, there are also three quick
tate balancing at the camera’s release plates, each with a dif-
center of gravity. ferent height, to accommodate
Item # BO3275...............136.95 all types of cameras.
Item # BO3263...............409.95
Quick Release
Mounting Plate (3271) Tripod Spacer (3261)
Compact Gear
With 1⁄4-20˝ thread screw. Allows greater tilting for the Head (3275)
Replacement for #3275. Deluxe Gear Head.
Item # BO3271 ...................9.95 Item # BO3261.................12.95
Height 4˝ (10cm) 4˝ (10cm) 5˝ (127cm) 5.25˝ (13.3cm) 6.25˝ (15.9cm) 7˝ (17.9cm) 5.25˝ (13.3cm) 5.4˝ (13.7cm) 5.1˝ (13cm) 6.1˝ (15.6cm)
Maximum Capacity 6.6 lbs. (3kg) 11 lbs. (5kg) 13.2 lbs. (6kg) 13.2 lbs. (6kg) 26.5 lbs. (12kg) 16.5 lbs. (7.5kg) 17.6 lbs. (8kg) 22 lbs. (10kg) 13.25 lbs. (6kg) 22 lbs. (10kg)
Ball Heads
Same as above, with quick panorama movements. Heavy Duty Double Action
release. Item # BO3055S.................34.95 Ball Joint Head (3055)
Item # BO3262QR.............39.95
Quick Release
Grip Action Ball Head (3265) Mounting Pate (3048)
With 1⁄4-20˝ Quick Release Plate Same as the Quick Release
#3266. By gripping the handle, Mounting Plate (3049), with 3⁄8˝
camera can be positioned any- Euro thread. Fits the Super Ball
where within a 180° sphere. Head (3038) and the Heavy
Features built-in bubble level Duty Double action Ball Joint
and tension adjustment. Made Head (3055).
of enameled cast metal, 81⁄4˝ Medium Ball
Item # BO3048...................14.95
high, weighs 1 lb. 14 oz. Head (3262)
Capacity 6 lbs. Quick Release
Item # BO3265...................63.95 Mounting Plate (3266)
With 1⁄4-20˝ thread.
Super Ball Head (3038) Replacement plate for the Quick
With 1⁄4-20˝ Quick Release Plate Release Medium Ball Head
#3049 and 3⁄8˝ Euro thread. This (3262QR) and Grip Action Ball
is Bogen’s top-of-the-line ball Head (3265). Works together
head. Superbly designed for with 35mm and standard
cameras as heavy as 26 lbs., it is thread-mounted medium
a finely machined, very smooth format cameras.
operating head that features Item # BO3266.....................9.95 Super
bubble levels for both axes, a Ball Head
360° scale in 5° increments, ten- Quick Release (3038)
sion control and pan action Mounting Plate (3266A)
levers that ratchet out of the Same as the Quick Release
way. A locking lever sets the Mounting Plate (3266), with 3⁄8˝
head as solidly and firmly as Euro thread. Fits the Quick
you will ever need, and for Release Medium Ball Head
added safety and convenience, it (3262QR) and Grip Action Ball
also has a quick release plate Head (3265). Works with Euro
with Safety Lock and both 1⁄4-20˝ thread medium format and
and 3⁄8˝ camera screws. large format cameras.
Item # BO3038 ................143.95 Item # BO3266A ..................9.95
CAMERA SUPPORTS
BOGEN BALL HEADS SPECIFICATIONS
Model # 3009 3026 3055 3262 3262QR 3265 3038
Weight .25 lbs. 1.4 lbs. 1.9 lbs. 1 lb. 1.1 lbs. 2 lbs. 3.75 lbs.
(113g) (624g) (850g) (450g) (500g) (907g) (1.7kg)
Height 2.75˝ 5˝ 5.5˝ 4.25˝ 4.3˝ 8.25˝ 6.75˝
(7cm) (12.7cm) (14cm) (10.8cm) (11cm) (21cm) (17.1cm)
Maximum Capacity 4.4 lbs. 8.8 lbs. 8.8 lbs. 8.8 lbs. 8.8 lbs. 5.5 lbs. 26.5 lbs.
(2kg) (4kg) (4kg) (4kg) (4kg) (2.5kg) (12kg)
Subject to change without notice
413
TRIPOD with #3025 Head #3028 Head #3029 Head #3030 Head #3047 Head #3265 Head
3001 Tripod BO30013025 BO30013028 BO30013029 BO30013030 BO30013047 BO30013265
80.89 90.89 99.89 105.89 120.89 124.89
3205 Tripod BO3001B3025 BO3001B3028 BO3001B3029 BO3001B3030 BO3001B3047 BO3001B3265
93.79 103.79 112.79 118.79 133.79 137.79
3011 Tripod BO30113025 BO30113028 BO30113029 BO30113030 BO30113047 BO30113265
93.89 103.89 112.89 118.89 133.89 137.89
3211 Tripod BO3011B3025 BO3011B3028 BO3011B3029 BO3011B3030 BO3011B3047 BO3011B3265
106.79 116.79 125.79 131.79 146.79 150.79
3021 Tripod BO30213025 BO30213028 BO30213029 BO30213030 BO30213047 BO30213265
115.89 125.89 133.89 140.89 155.89 159.89
3221 Tripod BO3021B3025 BO3021B3028 BO3021B3029 BO3021B3030 BO3021B3047 BO3021B3265
128.79 138.79 146.79 153.79 168.79 172.79
3033 Tripod BO30333025 BO30333028 BO30333029 BO30333030 BO30333047 BO30333265
164.89 174.89 184.89 189.89 204.89 208.89
3233 Tripod BO3033B3025 BO3033B3028 BO3033B3029 BO3033B3030 BO3033B3047 BO3033B3265
177.79 187.79 197.79 202.79 217.79 221.79
3036 Tripod BO30363025 BO30363028 BO30363029 BO30363030 BO30363047 BO30363265
179.89 189.89 199.89 204.89 219.89 223.89
3236 Tripod BO3036B3025 BO3036B3028 BO3036B3029 BO3036B3030 BO3036B3047 BO3036B3265
192.79 202.79 212.79 217.79 232.79 236.79
3046 Tripod BO30463025 BO30463028 BO30463029 BO30463030 BO30463047 BO30463265
159.89 169.89 179.89 184.89 199.89 203.89
3246 Tripod BO3046B3025 BO3046B3028 BO3046B3029 BO3046B3030 BO3046B3047 BO3046B3265
172.79 182.79 192.79 197.79 212.79 216.79
3051 Tripod BO30513025 BO30513028 BO30513029 BO30513030 BO30513047 BO30513265
206.89 216.89 226.89 231.89 246.89 250.89
3251 Tripod BO3051B3025 BO3051B3028 BO3051B3029 BO3051B3030 BO3051B3047 BO3051B3265
219.79 229.79 239.79 234.79 259.79 263.79
3259/3259B
3018/3218
3016/3216
With flip lock levers. Can be used compact 20˝ (51cm) and weighs
3245
to a maximum height of 59˝ only 1.7 lbs (765g).
3230/3231
Monopod Heads
3-D Head (3025)
Separately locked movements on three axes make this head perfect for Swivel Tilt
35mm cameras, and the conical self-adjusting bearing surfaces on the tilt Head (3232)
Q.R. Swivel
pivots provide more than enough strength to support medium format
Tilt Head (3229)
cameras. Thumb screw movement locks will not poke you in the eye.
Item # BO3025...................................................................................19.95
Swivel Tilt Head (3232)
Features a one axis movement which allows the camera to be tilted up
or down, or to be set up for a vertical shot. Includes a reversible 1⁄4-20˝
and 3⁄8˝ camera screw. Height is 2.2˝ (5.7cm), weight 7.4 oz. (210g).
Item # BO3232...................................................................................12.95
Q.R. Swivel Tilt Head (3229)
Same as above, with #3266 1⁄4-20˝ quick release plate for removing Quick Release Mounting Plate (3266)
camera quickly. Has a height of 2.4˝ (6cm). Weighs 9 oz. (254g). Replacement plate with 1⁄4-20˝ thread. Fits #3229 head.
Item # BO3229...................................................................................24.95 Item # BO3266........................................................................9.95
CAMERA SUPPORTS
Portable Dolly (3127)
Designed for all Bogen tripods, and for tripods with a 20˝ radius.
3˝ wheels have a sure-lock feature that raises casters free off the Portable
ground so that the dolly rests on separate feet. Folds to a compact Dolly
221⁄2˝ (57cm) and weighs 5.25 lbs. (2.4kg). Black finish. (3127)
Item # BO3127..............................................................................77.95
Variable Auto Dolly (3056)
Leg Spread Dolly (3137) Features a one-touch central
This dolly has a special feature pedestal which can lock or
that allows adjustment of the release all three wheels. When
radius from a maximum of 20˝ the pedal is lifted, cam action
(51cm) to as little as 12.5˝ raises the wheels free off the
(32cm). For use with all Bogen ground, and the weight of the
tripods and tripods with a dolly and tripod rest on sepa-
radius of up to 20˝. Has 2˝ rate feet. Has 2˝ Shephard cast-
415
casters, folds down to 15˝ ers. Accepts tripods with 19˝
(38cm) and weighs 5.9 lbs. (48cm) radius. Disassembles
(2.7kg). Black finish. easily into three pieces, the Heavy-Duty
Item # BO3137.................91.95 largest being 28˝ (579cm). Dolly
Dolly weighs 6.4 lbs. (2.9kg). (3167)
Heavy Duty Dolly (3067) Black finish.
Designed for use with the Item # BO3056.................87.95
Universal and Heavy-Duty
tripods. Individually braked 5˝ Folding Auto Dolly (3156)
wheels and a unique leg lock- Has same central pedal locking
ing system make it extremely feature as model #3056. Has 3˝ Auto
stable. Easy to assemble and Shephard caster wheels. Dolly
disassemble for transporting. Accepts tripods with 20˝ (3056)
Tripod legs are captured in a (50cm) radius. Dolly folds to
38˝ (97cm) diameter circle and 27˝ (69cm) and weighs 10.6
doorway clearance needed for lbs. (4.8kg). Aluminum finish.
the fully assembled dolly is Item # BO3156 ..............124.95
only 391⁄2˝ (100cm). Folds to
26˝ (66cm) and weighs 15.4 Folding Auto Dolly Black (3254)
lbs. (7cm). Black finish. Same as above, in black finish.
Item # BO3067 ..............184.95 Item # BO3254 ..............132.95
Tripod/Monopod Accessories
handy table, ladder or shelf Spiked Foot Column with Clamp (3253),
Item # BO3288A ..............47.95
Adapter shown with optional
to serve as a steady object on
(3256) Pan-Tilt head (3029)
which to mount camera. It Side Arm (3059)
fastens securely. Its geared Mounts on the center post of
column allows for exact tripods with 3⁄8˝ thread.
adjustments. Surveyor’s Double-sided (1⁄4-20˝ on one
Item # BO3253 ...............138.95 Spiked Foot side, 3⁄8˝ on other), enabling
(3257) cameras to be mounted on
All Weather Shoes (3255) either or both ends. This allows
Set of 3. 5.5˝ diameter (14cm). phtographers to shoot at a 90°
Snap these all-weather shoes angle without getting the legs
onto your tripod legs and be in the picture. 23.5˝ (60cm) in
set for snow, sand or other length and weighs 2 lbs. (900g).
irregular surfaces. Shoes Sidearm Aluminum color.
attach easily and provide the (3059) Item # BO3059 .................37.95
stability needed.
Item # BO3255 .................17.95 Side Arm (3059B)
Same as above in black color.
Spiked Foot Adapter (3256) Suction Grip Item # BO3059B...............39.95
Set of 3 spiked foot adapters. (3294)
Digs in to prevent the tripod Double Head Support (3153)
from shifting on gravel, rocks, Same as above, plus two
dirt, grass and more. For 3001, Suction
adjustable head platforms with
3011 and 3021 series tripods, Grip with
3
⁄8˝ thread. 23.5˝ (60cm) in
and 3016 and 3216 monopods. Camera length and weighs 3.5 lbs.
Item # BO3256 .................14.95 Support (1.59kg). Aluminum color.
(3289) Item # BO3153 .................56.95
Surveyor’s Spiked Foot (3257)
For all Bogen monopods, with Double Head Support (3153B)
the exception of those with Same as above in black color.
detachable legs. This model Item # BO3153B...............59.50
allows the monopod to be
firmly implanted in the Double
ground. Camera Support Platform (3269)
Item # BO3257 .................15.95 With 1⁄4-20˝ and 3⁄8˝ screws.
Elbow Designed to fit any tripod
Shoes for Spiked Feet (3139) Bracket head. Has 3⁄8˝ female socket.
Set of 3. Fits onto tripods with (3288) Holds two cameras 1⁄4-20˝ or
spiked feet when using indoors 3
⁄8˝. Length 11˝ (28cm), weight
or in studio. 20 oz. (562g).
Item # BO3139 .................17.50 Item # BO3269 .................47.95
CAMERA SUPPORTS
Bogen Manfrotto has designed a range of heads for panoramic picture taking. These can be turned into Virtual
Reality images using computer software developed by Apple called “Quick TimeTM Virtual Reality”.
This software, together with a new generation of easy to use and affordable Virtual Reality software such as
PictureWorks SpinTM, Panonimations NodesterTM, RealVR and Surround Video, provide a professional solution
for anyone interested in adding digital VR panoramic images to their WEB site and/or multimedia applications.
There are three important requirements to achieve good panoramic sequenced shots:
1. To level the panoramic rotation plane.
2. The ability to choose the repeatable angle of rotation between each shot.
3. Easy positioning of the camera lens optical centre above the rotation point (Nodal Point).
417
Allows the aperture to set the angle of rotation between each shot or the
number of shots spanning 360° rotation using the engraved, graduated Panoramic Head #300
scale markings for reference. The head can be used for precise sequential (3414)
and constant angle shots or simply for panning and reading the angle of
rotation. The camera can be mounted directly to the Panoramic head
(use adapter #120 (3054), not included, for 1⁄4˝ fitting) or on conven-
tional Ball or 3D head which in turn is mounted on the Panoramic
head. It features upper dual graduated scale to set the angle of rotation
from 0° to 90° or the number of shots (from 4 to 36) spanning 360°;
lower graduated scale from 0° to 360°. Accepts maximum weight of 30.8
lbs. (14kg). 2˝ tall and weighs 1.1 lbs. (.51kg).
Item # BO3414 ....................................................................................108.50
Suction Grip Socket (3294) Nikon Flash Adapter (3298) Quick Release Lightweight
Adheres to any flat non-porous Item # BO3298 ...................4.95 Mounting Plate (3272) Tripod Spreader (3138)
surface with a 5.8˝ (15cm) suc- Replacement for above. Same as Lightweight Tripod
tion cup. Accepts 5⁄8˝ stands, Telephoto Lens Support (3420) Item # BO3272 .................19.50 Spreader (3155), for tripods
studs, etc. Features a ball-joint With quick release. Designed with spiked feet. Weighs 25oz
socket which rotates within a to mount both the camera and Monopod Support (3422) (720g).
half hemisphere. Great for a medium sized telephoto lens Fits on any monopod and con- Item # BO3138 .................44.95
holding lights, cameras, scrims, onto a tripod and head. verts the monopod into a tri-
gobos, magic arms or articulat- Bracket length is adjustable, Roll-Pod (7000)
pod for long exposures.
ed arms. Weighs 42 oz. (1186g). from 7˝ to 11˝ to take different Provides photographers and
Mounts onto the top of the
Item # BO3294 .................56.50 length and diameter lenses and videographers with the quick-
weighs 1.45lbs. (.65kg). monopod and comes complete
est way to move their tripod
Suction Grip with the Mini Ball Head.
Item # BO3420..................49.95 over virtually any terrain. A
with Camera Support (3289) Item # BO3422 .................39.95 custom aluminum alloy frame
Same as above, featuring a Quick Release Plate (3266) with 16˝ ball bearing riveted
Extension Leg Set (3052)
418
camera support and an Replacement for above. spoke wheels. Can move cam-
adjustable pole for additional Item # BO3266 ...................9.95 Set of 3. Extends both the era bags, monitors, battery
support and stability. #3046 and #3051 tripods by packs and other accessories.
Item # BO3289 .................94.95 Heavy Duty Telephoto Lens 19˝ (48cm). The Roll-Pod works with
Support (3421) Item # BO3052 .................38.95 #3021, #3033, #3036, #3051
Macro Flash Bracket (3278) With quick release. This swiv- and #3058 photo series and
Allows positioning of two el/gimbal design incorporates Lightweight #3061 and #3068 video series
shoemount flashes for macro the Pro Quick Release Adapter Tripod Spreader (3155) tripods. Specs are: Axle length
shooting with the camera in a Assembly with sliding plate The quick and easy way to add 35˝ (89cm), leg clamp max ID
vertical or horizontal position. (3273), allowing you to control stability. Its minimum radius is 1.3˝ (32mm), handle clamp
Extends to 21.5˝ (54.5cm). the balance and positioning of 16˝ (40.6cm). Its maximum max ID 1.6˝ (40mm), load
Folds to 9˝ (22.5cm) and long lenses. Measures 81⁄2˝x75⁄8˝ spread radius is 251⁄2˝ (64.8cm). capacity 100 lbs. (45.7kg) and
weighs 12.7 oz. (360g). and weighs 2.6 lbs. (1.2kg). It weighs only 24 oz. (678g). weighs 9 lbs. (4kg).
Item # BO3278 .................44.95 Item # BO3421 ...............114.95 Item # BO3155 .................34.95 Item # BO7000 ...............319.95
Roll-Pod
(7000)
Heavy Duty
Telephoto
Lens Support
Tripod (3421)
Apron
(3146)
Telephoto
Lens Support
(3420)
Monopod
Support
(3422)
All items are complete with all accessories as supplied by the manufacturer
BOGEN-MANFROTTO
A C C E S S O R I E S , S T R A P S A N D B A G S
Tripod/Monopod Accessories, continued
CAMERA SUPPORTS
Long Lens Support (3252)
This sturdy support attaches to Projector
Platform
the tripod with a Super Clamp
(3290)
(included) and telescopes to
Long Lens
the tripod socket on the cam-
Support
era up to 26˝ (66cm) to pre- (3252)
vent vibration. Camera sits on
mini ball head (included).
Weighs 24.4 oz. (692g). Monopod
Item # BO3252 .................36.95 Shoulder
Brace
Projector Platform (3290) (3248)
The aluminum Projector
Platform for projectors, speak-
ers, etc., attaches to Bogen
tripods or any tripod without
419
head and 3⁄8˝ screw. Measures
9.75x13.75˝ (24.8x35cm) and
weighs 2.3 lbs. (1kg).
Item # BO3290 .................24.95
3-Section Center
Column Monopod (3259)
Fits all #3011, #3211 and #3021
and # 3221 tripods. Allows you Monopod
Belt Pouch
to remove the column from (3247)
Padded Tripod Bag (3282)
the tripod and use it as a 59˝
(150cm) monopod. When the
Center Column Monopod is Flanges and Plates Bags
used with the #3021 or #3221,
minimum height is increased. Converter Plate (3154) Zippered with carrying strap.
Extends from 20˝ to 57˝. Handsome dark blue heavy-
Aluminum finish.
3
⁄8˝ female thread on both sides.
Allows any Bogen tripod or duty Cordura nylon.
Item # BO3259 .................54.95 Converter any tripod with 3⁄8˝ thread to
Plate (3054) Junior Tripod
Center Column accept male 3⁄8˝ thread. Also
allows use of the Side Arm Bag 23˝ [58cm] (3409)
Monopod Black (3259B)
#3059 as a column extension. Item # BO3409 ...............19.95
Same as above, in black finish. Converter Plate (3054) Item # BO3154 .................14.95
Item # BO3259B...............56.50 Allows any Bogen tripod or any Tripod Bag 25˝ [63.5cm] (3279)
tripod with 3⁄8˝ thread to accept Adapter with Flange (3367) Item # BO3279 ...............29.95
Monopod cameras with 1⁄4-20˝ socket. Converts 1⁄4-20˝ to 3⁄8˝.
Shoulder Brace (3248) Tripod Bag 35˝ [89cm] (3280)
Item # BO3054 .................13.50 Item # BO3367 ...................6.50
Fits against shoulder to give Item # BO3280 ...............36.95
extra support and greater
stability to the monopod. Straps Tripod Bag 45˝ [114cm] (3281)
Item # BO3248 .................16.50 Item # BO3281 ...............46.95
Lightweight Carrying Strap (3045)
Monopod Belt Pouch (3247) With shoulder pad. Attaches to Padded Tripod Bag (3282)
Adds stability and allows use tripod via screw and loops Extra large heavy duty padded
of monopod at less than full around the legs for convenient back bag 46˝ (117cm) with a 9˝
length for easy transport. carrying. 1˝ wide; adjusts to (23cm) circumference. With car-
Item # BO3247 .................12.95 57˝ (145cm). Lightweight rying handle and shoulder strap.
Item # BO3045 .................12.95 Carrying Item # BO3282 .................69.95
Tripod Apron (3146) Strap (3045)
Attaches easily to any Bogen Heavy Duty Carrying Strap (3044) Padded Tripod Bag (3282S)
tripod. Holds lenses, film, With shoulder pad. Same as Junior Strap (3408) Same as above, but 33˝ (84cm)
filters, etc. above. 2˝ wide strap. With shoulder pad. 11⁄2˝ wide. by 9˝ (23cm) diameter.
Item # BO3146 .................20.95 Item # BO3044 .................19.95 Item # BO3408 .................12.50 Item # BO3282S ...............59.95
Compact Quick Release (3299) Universal Mounting Plate (3268) Lockable tripod
With Quick Release Plate With 1⁄4-20˝ and 3⁄8˝ screws. A cases made of
#3266. Ideal for 35mm cameras. 2.4 x 4.7˝ (6x12cm) mounting heavy-duty high-
Item # BO3299 .................24.95 plate. Fits all Bogen quick density polyethyl-
release heads using Pentagonal ene with exception-
Low Profile plates, such as #3038, #3039, al impact resistance
Quick Release (3270) #3047 and #3055 heads. outside, superior
With Quick Release Plate Item # BO3268 .................23.95 cushioning inside.
#3271. Attaches to any head. Features aluminum
Provides quick release feature. 90° Alignment tongue and groove
Mounting Plate (3267)
Threaded for 1⁄4-20˝ and 3⁄8˝. closures, recessed
For architectural photography. nickel-plated latches
Item # BO3270 .................24.50
Assures perfect alignment in and piano hinges.
the vertical position. Fits all
Pro Quick Release Adapter Small case interior
Bogen quick release heads Small Hard
with Slide Plate (3273) using Pentagonal plates, such measures 6x6x44˝
Case (3285)
420
With quick release 5.5x2˝ plate as #3038, #3039, #3047 and (15x15x112cm) and
#3272 and extra 3⁄8˝ screw. Base #3055 heads. weighs 9.7 lbs. (4.4kg). Large Hard
is threaded for 1⁄4-20˝ and 3⁄8˝. Item # BO3267 .................18.95 For #3033, #3036, #3046 Case (3286)
Item # BO3273 .................31.95 and #3051 tripods with all heads, except #3066. Large case interior
Anti-Theft Locking Plate (3295) measures 9.5x9.5x44˝ (24x24x112cm) and weighs 13.3 lbs. (6kg). For
Quick Release Designed for #3047, #3038, #3062, #3065, #3194 and #3195 tripods.
Mounting System (3296) #3039 and #3055 heads. Easy to
With Pentagon Quick Release use. Simply remove the quick Small Hard Case (3285)
Plate #3049 and extra 3⁄8˝ screw. release plate, replace with the Item # BO3285 ...........................................................................139.95
Base is threaded for 1⁄4-20˝ Anti-Theft Plate and attach
and 3⁄8˝. cable to stationary fixture. Large Hard Case (3286)
Item # BO3296 .................30.95 Item # BO3295 .................54.95 Item # BO3286 ...........................................................................154.95
Universal 3264M 1
⁄4-20, 3⁄8 #3263 BO3264M 12.50
Quick
Mounting Release 3264H 1
⁄4-20, 3⁄8 #3263 BO3264H 12.50
Plate (3268) Mounting
System 3266 ⁄4-20
1
#3229, #3262QR, #3265, #3299, #3420 BO3266 9.95
(3296) 3266A 3
⁄8 #3229, #3262QR, #3265, #3299, #3420 BO3266A 9.95
3267 1
⁄4-20 #3038, #3039, #3047, #3055, #3296 BO3267 18.95
3268 1
⁄4-20, 3⁄8 #3038, #3039, #3047, #3055, #3296 BO3268 23.95
3271 1
⁄4-20 #3270, #3275 BO3271 9.95
Quick Release 3272 1
⁄4-20 #3273, #3421 BO3272 19.50
Mounting
90° Alignment 3297 1
⁄4-20 #3057 BO3297 37.95
Plate (3049)
Mounting Plate 3411 ⁄4-20
1
#3410 BO3411 11.95
(3267)
3412 3
⁄8 #3410 BO3412 11.95
CAMERA SUPPORTS
technology and precision craftsmanship to produce a rugged tripod of minimal
weight. They are distinguished by modern design, state-of-the-art concepts and
functional engineering. Universal
(54100)
All Cullman tripods and accessories are covered by a 5 year warranty.
Universal Tripods
421
brace column support, built-in comes with a quick release wide camera plate and a safety lock.
carry handle and rubber feet.
Universal 2200 Universal 3230 3430 Tripod (3430)
Universal 100 Tripod (CU-54100) Video Tripod (CU-2200) Photo Tripod (CU-3230) A 29mm diameter leg tripod
With quick release three way With quick release plate. With 3-way quick release photo with wide quick release plate
pan head. A 20mm diameter Geared column, 2-way fluid head. Heavy 29mm trapezoidal and removable center column
leg tripod with geared air cush- effect pan head for smooth legs, built-in handle with which can be converted into a
ion center column and built- rotation. retractable shoulder strap geared 3-section monopod accepting
on carrying handle. Ideal for Item # CUU2200 ..............96.50 crank with locking center col- 1/4-20˝ accessories, including
compact cameras. umn and bubble levels. removable fluid head.
Item # CUU100 ................48.50 2800 Tripod (2800) Item # CUU3230 ............129.95 Monopod will extend to 441⁄2˝
A 25mm diameter leg tripod (114cm).
Universal 101 Tripod (CU-54101) with large 21⁄4 x 21⁄4˝ (60x60mm) Universal 3401 Item # CU3430...............148.95
With quick release three way quick release plate and remov- Video Tripod (CU-3401)
pan head and ball joint rubber able center column. Ideal for With quick release head. Shares Universal
feet, a 25mm diameter leg tri- 35mm cameras. all of the 3230 series specifica- Macro Tripod (CU-3335)
pod air cushioned geared cen- Item # CU2800 ...............129.95 tions plus. The center column Solid, stable tripod perfect for
ter column and built-on carry- can be instantly converted into macro or table top photogra-
ing handle. Ideal for SLR’s and a full height monopod with phy. Center column is remov-
video cameras. quick release head. able and reversible to facilitate
Item # CUU101 ................54.50 Item # CUU3401 ............164.95 extra low camera angles.
Compact design when closed,
Universal 102 Tripod (CU-54102) yet reaches full height for nor-
With heavy duty removable 3- mal tripod uses.
way large pan head, 2.25 x Item # CUUM ................136.50
2.25˝ (60x60mm) quick release
plate and ball joint rubber feet. Universal 3301
A 28mm diameter leg tripod Macro/Ground Tripod (CU-3301)
with air cushioned geared cen- With quick release head. This
ter column and built-on carry- specially designed tripod has
ing handle. For medium weight vari-position legs and can be
photo and video cameras. opened to facilitate extremely
Head is removable to fit other low camera angles. Perfect for
1/4-20˝ accessories. flowers, macro, repro photog-
Item # CUU102 ................79.95 raphy. It can be used in nor-
mal position for “eye level”
Universal 1600 Tripod (CU-1600) work. 2-section anodized leg
With quick release 3-way pan segments include unique slid-
Universal ing/lock center column. Built-
head. Features thick, 21mm, 102 Tripod
closed segment legs to keep out (CU-54102) in carrying handle and
the elements. 2800 Tripod (2800) retractable shoulder strap.
Item # CUU1600 ..............74.95 Item # CUU3301............178.50
MODEL # 100 101 102 1600 2200 2800 3230 3401 3430 3335 3301
Load Capacity 7.7 lbs. 7.7 lbs. 8.8 lbs. 6.6 lbs. 7.7 lbs. 7.7 lbs. 7.7 lbs. 7.7 lbs. 7.7 lbs. 7.7 lbs. 7.7 lbs.
(3.5kg) (3.5kg) (4kg) (3kg) (3.5kg) (3.5kg) (3.5kg) (3.5kg) (3.5kg) (3.5kg) (3.5kg)
Minimum Usable Height 22˝ 22.6˝ 26.2˝ 23˝ 23˝ 23.2˝ 24.8˝ 24.4˝ 24.3˝ 0˝ 15.7˝
(56.5cm) (57.5cm) (66.5cm) (59cm) (59cm) (59cm) (63cm) (62cm) (63cm) (0cm) (40cm)
Maximum Extension 61˝ 60.6˝ 64.6˝ 58˝ 60˝ 58˝ 60˝ 59˝ 59.5˝ 59˝ 60˝
(156cm) (154cm) (164cm) (147cm) (154cm) (147cm) (152cm) (150cm) (151cm) (150cm) (152cm)
Leg Sections 3 3 3 3 3 3 3 3 3 3 3
Center Column Sections 1 1 1 1 1 1 1 1 1 1 1
Folded Length 24˝ (60cm) 24˝ (61cm) 27.5˝ (70cm) 21˝ (53.3cm) 26˝ (67cm) 23˝ (58.4cm) 24˝ (61cm) 27˝ (69cm) 27˝ (69cm) 16˝ (40.6cm) 27˝ (69cm)
Weight 2.6 lbs. 3 lbs. 4.2 lbs 27.5 oz. 3.2 lbs 4 lbs. 5.25 lbs. 5.25 lbs. 5.25 lbs. 5.6 lbs. 5.6 lbs.
(1.2kg) (1.4kg) (1.9 kg) (780g) (1.4kg) (1.8kg) (2.4kg) (2.4kg) (2.3kg) (2.5kg) (2.5kg)
Subject to change without notice
422
Touring Set - The Ultimate Outdoor Survival Set Magic Super Compact Tripods
This five-piece versatile kit will The world’s most compact full
hold a still or video camera height tripods fold flat for easy
steady on virtually any surface storage. Made of light weight
in any situation. It contains a anodized aluminum, the Magic
special compact combination 2 and Video Magic tripods have
tripod with ballhead, the basis
of the Touring Set, a Universal the capability of also converting to monopods. Ideal for travelling.
Clamp, a Suction Pad, a 7˝
Ground Spike and a Wood Magic II Tripod (2722) Mini Magic Tripod (CU-2701)
Touring Kit
Screw, which are all available (1001) With quick release and remov- A smaller sized magic tripod
separately. able ballhead. By removing one with the same unique “folding
Suction Pad (CU-1003) of the legs and center column it flat” design as the Magic II.
Compact Combination Tripod Reliable mounting to all slip- can be converted into a 25-45˝ Includes a sliding center col-
with Ballhead (CU-1002) pery surfaces. Its maximum
weight capacity is 22 lbs. (10kg) (63-115cm) monopod which umn, with ball and socket
The light weight and compact will accept 1/4-20˝ accessories, head. Weighs only 1.5 lbs.
size of this tripod make it an and it weighs 10 oz. (275g).
Item # CUSM ...................33.50 including supplied ballhead. Great for backpackers.
ideal, take-anywhere tripod. Item # CUM2 .................129.95 Item # CUMM..................67.95
The center-column and ball Ground Spike (CU-1006)
and socket head may be com- This 7˝ (18cm) spike gives Video Magic Tripod (CU-2732)
bined with any part of the set. additional support. It weighs
Its load capacity is 6.6 lbs. With quick release fluid effect head. Same features as the Magic II
3.2 oz. (90g). Tripod with a fluid head instead of a ballhead. It can also be used
(3kg), its minimum height
Item # CUGS ....................16.95 for photo cameras.
12.2˝ (31cm), and its maxi-
mum height 32.2˝ (82cm). It Wood-Screw (CU-1005) Item # CUVM.............................................................................129.95
weighs only 19 oz. (540g). For secure fixing to fences,
Item # CUC ......................52.50 logs, tree stumps, beams, etc. MAGIC TRIPOD SPECIFICATIONS
May be used in conjunction
Universal Clamp (CU-1004) MODEL # MAGIC II VIDEO MAGIC MINI MAGIC
with the ball and socket head of
Allows secure mounting on any the center column of the tri- Load Capacity 7.7 lbs. (3.5kg) 7.7 lbs. (3.5kg) 6.6 lbs. (3kg)
round, square or irregular sur- pod. It weighs 2.5 oz. (70g).
face with a diameter of up to Maximum Extension 57˝ (145cm) 57˝ (145cm) 21˝ (53.3cm)
Item # CUWS ...................16.95
3.25˝ (8.5cm). The back of the Leg Sections 4 4 4
clamp is lined with protective Touring Kit (1001)
Center Column Sections 2 2 2
material, and may be used in Contains the Compact
combination with the ball and Combination Tripod Folded Length 13.5 x 6 x 1.5˝ 13.5 x 6 x 1.5˝ 8.5 x 6 x 1.5˝
socket head and the correct with Ballhead, Universal (34.5 x 15.3 x 3.8cm) (34.5 x 15.3 x 3.8cm) (21.2 x 15.3 x 3.8cm)
column of the tripod. It weighs Clamp, Suction Pad, Ground
12 oz. (340g). Spike, and Wood Screw. Weight 3 lbs. (1.4kg) 3.3 lbs. (1.5kg) 1.5 lbs. (680g)
Item # CUCU ...................39.95 Item # CUTS ..................136.50 Subject to change without notice
CAMERA SUPPORTS
Professional tripods constructed of hollow trapezoidal legs. The advan-
tage over an open profile leg is that these are far more resistant to twist-
ing, yet still weigh less, while accepting a maximum load of 154 lbs.
(70kg). Through the fixed pneumatic center column, the camera height
is lowered by reducing the pressure. There is no possibility of the camera
suddenly dropping down. The length of the legs can be quickly and easi-
ly extended with the aid of the wide snap locks on top of the tripod. The
legs are sealed and waterproofed, allowing you to use them outdoors, in CT-110 Tripod
Leg (55110)
snow, water or sand, without fear of the elements. The lower leg has a
423
35mm diameter and the upper leg a 29mm diameter.
Minimum Usable Height 28.7˝ (73cm) 28.7˝ (73cm) 37.8˝ (96cm) 21.6˝ (55cm)
Maximum Extension 63.4˝ (161cm) 63.4˝ (161cm) 59˝ (150cm) 55˝ (140cm)
Leg Sections 2 2 2 2
1˝ diameter, 2.8˝ height quick coupling. It is ideal for Taller, extends to 56˝. Includes 3- Tripod
way quick release head. Carry case (52013)
(70mm) and weighs 5.3oz use with both cameras and
(150g). binoculars. inlcuded for easy transport.
Item # CUBHS..................29.50 Item # CUTP ....................44.50 Item # CUJS15 ..........................59.95
Camera Plate
1
⁄4˝ Standard (CU-81)
M O N O P O D S Item # CUQRP.25 ............12.95
Camera Plate
4-Section Deluxe Monopod (1747) 1
⁄4˝ with Stabilizer Bar (CU-83)
A most unique monopod! Includes 2-way removable fluid effect pan head Item # CUQRP.25SB .......13.95
with quick release camera plate. 62˝ (158cm) maximum height. 21˝ (54cm)
collapsed height. Unique built-in tri-support legs are concealed inside the Camera Plate
bottom leg for leaning monopod on its own weight. Weighs 28.5 oz. (810g). 3
⁄8˝ Standard (CU-82)
Item # CUMPD........................................................................................67.95 Item # CUQRP38 .............12.95
CT-304 Titan Monopod (CU-55304)
Camera Plate 3⁄8˝ with
Built the same way as the Titan tripods. 29mm bottom leg and 35mm top
leg. Weighs 4 lbs. (1.8kg) and extends to 61˝ (155cm). Stabilizer Bar (CU-85)
Item # CUMPCT304 .............................................................................174.50 Item # CUQRP38S...........13.95
CAMERA SUPPORTS
acknowledged by professionals all over the world to
have set the industry’s standard of excellence. The
finest and strongest metal alloys are used in the man-
ufacture of Gitzo products. Each tripod has been espe-
cially designed to withstand a maximum weight of
equipment. This weight is determined by the diameter
of the upper tripod leg. The first number in a 3-digit
number, or the second number in a 4-digit number
refers to the tripod upper leg and will also help in
choosing the proper tripod head. For example, a dis-
425
continued G-375 or a current G-1376 head will match
a G-320 tripod leg; while a G-1275 head will match a
discontinued G-224 or a current G-1228 tripod leg.
Gitzo tripods are superbly engineered to withstand the most robust handling. High strength light alloy tubes
resist twist and stress to provide absolute stability. Fine-tolerance telescopic legs ensure smooth silent gliding
action every time. And all Gitzo tripods are easily assembled and maintained, while fiber clamping bushes will
protect the metal surfaces against damage and wear.
Tripod Legs
Gitzo makes two style tripods – Standard Tripods, and Performance Tripods. The leg of the Standard style tripod spreads to 24°, while the
Performance style tripod has a variable leg spread of 24° and 60° on the series 0, 1, 2 and Studex Series 3. The Inter Pro Studex Series 3, Pro Studex
Series 4 and the Tele Studex Series 5 have an additional leg spread of 80°. Most Gitzo tripods include a Sliding Rapid Reversible center column,
or a Geared column. All columns and heads are fitted with 1⁄4˝ reversible to 3⁄8˝ screw.
SERIES 00 SERIES 0
Table Tripod (G0011) Compact and sturdy tripods for 35mm and small camcorders.
A very popular table or mini tripod offering maximum rigidity for
compact cameras. Features effortless double lift rapid center col- Weekend Weekend Compact
umn and can be used as a firm wall brace. Extremely portable, it Standard Tripod (G01) Performance Tripod (G026)
fits into the the smallest of accessory bags. With one section rapid column. With two section rapid column.
Item # GIG0011 ............................................................................84.95 Item # GIG01................123.95 Item # GIG026..............196.95
SERIES 1
Suitable for 35mm cameras, lightweight medium format and video
cameras. Available with a fixed leg spread in the Standard series, or a Weekend
Standard
variable leg spread in a Performance series.
Tripod
(G01)
Sport Standard Tripod (G101) Sport Performance Totalux
With one section rapid column. Tripod (G126)
Item # GIG101 ...............144.95 With two section rapid column.
Item # GIG126 ...............194.95
Sport Standard
Totalux Tripod (G106) Sport Performance Tripod (G112)
Sport
With two section rapid column. With geared column. Standard
Item # GIG106 ...............149.95 Item # GIG112 ...............247.95 Tripod
(G101) Reporter
426
SERIES 2
CAMERA SUPPORTS
MODEL # G201 G220 G1222 G224 G226 G212 G218 G228 G1227 G1228
Load Capacity 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.3 lbs. 13.5 lbs. 13.5 lbs.
(6kg) (6kg) (6kg) (6kg) (6kg) (6kg) (6kg) (6kg) (6.1kg) (6.1kg)
Maximum Extension 57.5˝ 58.3˝ 73.1˝ 73.8˝ 58.5˝ 69.5˝ 63.8˝ 64˝ 63.3 lbs. 60.9˝
(146cm) (135cm) (186cm) (187cm) (149cm) (177cm) (162cm) (163cm) (6.1kg) (155cm)
Minimum Usable Height * 18.3˝ (48cm) 12.8˝ (34cm) 13.5˝ (34cm) 14.6˝ (37cm) 10.8˝ (27cm) 15˝ (38cm) 15˝ (38cm) 12˝ (30cm) 12.5˝ (32cm) 12.5˝ (32cm)
Leg Sections 3 3 4 3 4 3 3 3 3 3
Center Column Section 1 2 2 2 2 2 1 1 1 1
Folded Length 19.8˝ (50cm) 21.3˝ (54cm) 24˝ (61cm) 25˝ (64cm) 17.3˝ (44cm) 25.5˝ (65cm) 26˝ (66cm) 18.5˝ (47cm) 25.1˝ (63.9cm) 20.5˝ (52cm)
Weight 4 lbs. (1.8kg) 4.3 lbs. (2.2kg) 5.3 lbs. (2.4kg) 5 lbs. (2.3kg) 4.3 lbs. (2.2kg) 5.5 lbs. (2.5kg) 5.5 lbs. (2.5kg) 4.5 lbs. (2kg) 3 lbs. (1.4kg) 3 lbs. (1.4kg)
* Minimum capacity height is with camera on top of tripod. By reversing center column, the tripod can be used even lower.
427
This series supports cameras up to 4x5˝, as well as heavier video tripods have interchangeable center columns, some wing locks,
cameras. The Inter Pro Series and Mountaineer 1348 and 1349 additional leg spread of 80° and will hold heavier cameras.
Studex Performance Tripod (G320) Studex Compact Inter Pro Studex Mountaineer
With two section rapid column. Performance Tripod (G328) Compact Performance (G345) Photo/Video Tripod (G1325)
Item # GIG320 ...............284.95 With geared column. Without center column. Can With interchangeable flat plate.
Item # GIG328 ...............439.95 be used with G315, G317, G336 Item # GIG1325 .............629.95
Studex Performance and G338 center columns.
Monotripod (G1322) Inter Pro Item # GIG345 ...............324.95 Mountaineer
With 2-section rapid column. Studex Performance (G340) Photo/Video Tripod (G1329)
Features a removable leg. Can Without center column. Can be Inter Pro Studex With one section rapid column
be used as a 4-section monopod used with G315, G317, G336 and Compact Performance (G346) #G1318.
extended to 62.3˝ (158cm) and G338 center columns. With one section rapid column Item # GIG1329 .............689.95
closed down to 21.3˝ (54cm). Item # GIG340 ...............271.95 #G317.
Item # GIG1322 .............389.95 Item # GIG346 ...............389.95 Mountaineer
Inter Pro Photo/Video Tripod (G1348)
Studex Compact Studex Performance (G341) Inter Pro Studex With interchangeable flat plate.
Performance Tripod (G326) With one section rapid column Compact Performance (G347) Item # GIG1348 .............789.95
With two section rapid column. #G315. With geared column #G338.
Item # GIG326 ...............354.95 Item # GIG341 ...............343.95 Item # GIG347 ...............529.95 Mountaineer
Photo/Video Tripod (G1349)
Studex Performance Tripod (G312) Inter Pro Studex Performance Tripod (G342) With one section rapid column
With geared column. With geared column #G336. #G1318.
Item # GIG312 ...............374.95 Item # GIG342 ............................................................................476.95 Item # GIG1349 .............844.95
Series 4 tripods will support This series tripods feature the largest diameter legs, are designed for heavy use and will accommodate cam-
cameras up to 8x10˝, as well as eras up to heavy 8x10˝ and TV cameras. They also feature interchangeable column capability.
heavier video cameras. They also
feature interchangeable column Tele Studex Tele Studex Giant Tele Studex Compact
capability. Performance (G500) Performance (G504) Performance (G505)
Without center column. Can Without center column. Can Without center column. Can
Pro Studex Performance (G410) be used with G524, G525, be used with G524, G525, be used with G524, G525,
Without center column. Can G526, G527, G528 and G529 G526, G527, G528 and G529 G526, G527, G528 and G519
be used with G524, G526, center columns. center columns. center columns.
G526, G528 and G529 center Item # GIG500 ...............399.95 Item # GIG504 ...............509.95 Item # GIG505 ...............389.95
columns.
Item # GIG410 ...............314.95 Tele Studex Tele Studex Giant Tele Studex
Performance (G501) Performance (G508) Compact Performance (G506)
Pro Studex Performance (G411) With one section rapid column With 1 section rapid column With one section rapid column
With one section rapid column #G525. #G525. #G525.
#G525. Item # GIG501 ...............449.95 Item # GIG508 ...............579.95 Item # GIG506 ...............459.95
428
CAMERA SUPPORTS
MODEL # G500 G501 G502 G504 G508 G509 G505 G506 G507 G515 G1548
Load Capacity 33 lbs. 22 lbs. 33 lbs. 33 lbs. 22 lbs. 33 lbs. 33 lbs. 22 lbs. 33 lbs. 44 lbs. 40 lbs.
(15kg) (10kg) (15kg) (15kg) (10kg) (15kg) (15kg) (10kg) (15kg) (20kg) (18kg)
Maximum Ext 63.3˝ 76.5˝ 74˝ 98˝ 111.3˝ 108.8˝ 58.4˝ 71.8˝ 69.1˝ 47.8˝ 58.3˝
(160cm) (194cm) (188cm) (249cm) (283cm) (276cm) (148m) (182cm) (176cm) (121cm) (148cm)
Minimum 6.5˝ 8.8˝ 8.8˝ 6.3˝ 8.8˝ 8.8˝ 6.5˝ 8.8˝ 8.8˝ 7.3˝ 15˝
Usable Height * (17cm) (22cm) (22cm) (16cm) (22cm) (22cm) (17cm) (22cm) (22cm) (18cm) (38cm)
Leg Sections 3 3 3 5 5 5 4 4 4 2 4
Cntr Col Section - 1 1 - 1 1 - 1 1 - -
Folded Length 28.5˝ 30.8˝ 30.8˝ 31.5˝ 33.8˝ 33.8˝ 23.3˝ 25.5˝ 25.5˝ 32.5˝ 23.3˝
(72cm) (78cm) (78cm) (80cm) (86cm) (86cm) (59cm) (65cm) (65cm) (83cm) (59cm)
Weight 9.8 lbs. 10.8 lbs. 12.5 lbs. 12.3 lbs. 13.3 lbs. 15.3 lbs. 9 lbs. 10.3 lbs. 12 lbs. 8.5 lbs. 6.4 lbs.
(4.4kg) (4.9kg) (5.7kg) (5.6kg) (6kg) (6.9kg) (4kg) (4.6kg) (5.4kg) (3.9kg) (2.9kg)
429
* Minimum capacity height is below normal use with camera on top of tripod. By reversing center column, the tripod can be used even lower.
3-Way Heads are designed to Rationelle 3-Way Pan Tilt Head (G1372) Rationelle 3-Way Pan Tilt
carry a specific load. Large With quick release plate. Recommended for use with Series 2 and 3 Head (G1571)
ergonomically designed hand- tripods. Platform size 2 x 2˝ (5 x 5cm). Recommended for use with
grips ensure effortless vertical Item # GIG1372 .........................................................................153.95 Series 4 and 5 tripods. Platform
and lateral tilting and 360° pan- size is 3.8 x 2.8˝ (9 x 7cm).
ning. Low profile heads provide Item # GIG1571 .............184.95
solid support and flexibility for
large format and video cameras. Rationelle 3-Way Pan Tilt
Head (G1572)
The distance from the top of the
With quick release plate.
tripod to the platform is reduced Recommended for use with
to ensure that the center of grav- Series 4 and 5 tripods. Platform
ity of the camera is kept over the size is 2 x 2˝ (5 x 5cm).
middle of the tripod to avoid the Item # GIG1572 .............226.95
possibility of overbalancing. All
heads are supplied with 1⁄4-20˝ Rationelle Low Profile 3-Way
➧
Gitzo
Recommended for use with
Rationelle 3-Way Pan Tilt Rationelle Low Gitzo Series 1 and 2 tripods. Platform
Profile 3-Way Rationelle 3-Way
Head (G1171) size 4.8 x 2.8˝ (12 x 7cm).
Pan Tilt Head Pan Tilt Head
Platform size 1.6 x 2.1˝ (4.1 x (G1270) Item # GIG1270 .............104.95
(G1171)
5.4cm).
Item # GIG1171 .............117.95 Rationelle Low Profile 3-Way
Pan Tilt Head (G1370)
Rationelle 3-Way Pan Tilt Recommended for use with
Head (G1172) Series 3 tripods. Platform size
Recommended for use with is 4.8 x 2.8˝ (12 x 7cm).
Series 0 and 1 tripods. Platform Item # GIG1370 .............159.95
size 1.5 x 2˝ (4.1 x 5cm).
Item # GIG1172 .............134.95 Rationelle Low Profile 3-Way
Pan Tilt Head (G1570)
Rationelle 3-Way Pan Tilt With 1⁄4-20˝ and 3⁄8˝ camera
Head (G1371) mounting screws.
➧
Gitzo
Series 2 and 3 tripods. Platform Gitzo Rationelle 3-Way (G1572) Series 4 and 5 tripods. Platform
size 2.8 x 2˝ (7 x 5cm). Pan Tilt Head (G1372)
size 6 x 3.4˝ (15.2 x 8.6cm).
Item # GIG1371 .............139.95 Item # GIG1570 .............199.95
Ball Heads
430
Exceptionally smooth rotation, positive locking and rapid cam- Ball Head (G075) Ball Head (G1375)
era mounting are all features common to the Gitzo designed Recommended for use with Recommended for use with
range of ball heads. The graduated base, with independent lock- Series 00 and 0 tripods. Series 2 and 3 tripods. Platform
ing facilities permits perfect panoramic photography. The design Platform size 1.4˝ (3.5cm) size 2.4 x 2.7˝ (6 x 7cm).
of the panoramic base permits the ball heads to be used for table diameter. Item # GIG1375 .............149.95
top or near ground level work with or without the use of a tri- Item # GIG075 .................54.95
pod. A quick release plate with secondary safety lock and the Ball Head (G1575)
option of a long plate provide additional flexibility on Model Ball Head (G1175) Recommended for use with
#G1276, G1376 and G1576; the camera can be removed from the Recommended for use with Series 4 and 5 tripods. Platform
head within seconds and fitted back on the head as easily. All Series 0 and 1 tripods. Platform size 2.3 x 2.3˝ (5.7 x 5.7cm).
heads are supplied with 1⁄4-10˝ camera mounting screw. size 1.75˝ (4.5cm) diameter. Item # GIG1575 .............199.95
Item # GIG1175 ...............89.95
Ball Head (G1576)
Ball Head (G1275) With quick release plate.
Gitzo Recommended for use with
Gitzo
Ball Head Recommended for use with Series 4 and 5 tripods.
Ball Head ➧ (G1375) Series 1 and 2 tripods. Platform
(G1376) Item # GIG1576 .............219.95
size 1.7 x 2.5˝ (4.5 x 6.4cm).
➧
CAMERA SUPPORTS
All monopods include a reversible 1⁄4˝ and 3⁄8˝ mounting stud and a hand carrying strap. Gitzo Pod
5-Section Monopod (G558)
With adjustable shoulder
brace, deluxe hand grip, and
neck harness, it is a combina-
tion of a monopod, chestpod,
emergency tripod and table
pod. Folds like a jack knife,
making it usable as a chest pod
in conjunction with the neck
harness.
Item # GIG558................224.95
Mountaineer Reporter
Monotrek 4-Section Carbon Fiber
G1564L
G1563L
431
G558
G1565
G1564
G1563
G1561
G1568
G566
MONOPOD SPECIFICATIONS
MODEL # G1561 G1563 G1563L G1564 G1564L G1565 G566 G558 G1568 G1560
Sections 4 4 5 4 5 4 6 5 4 3
Load Capacity 6.8 lbs. 8.7 lbs. 8.7 lbs. 17.5 lbs. 17.5 lbs. 17.5 lbs. 11 lbs. 11 lbs. 8.7 lbs. 4.5 lbs.
(3kg) (4kg) (4kg) (8kg) (8kg) (8kg) (5kg) (5kg) (4kg) (2kg)
Height Range 24.8-61.1˝ 21.3-64˝ 22.4-80.3˝ 21.6-62.5˝ 22.4-78.5˝ 21.8-62.7˝ 14.5-53.3˝ 26.5-60.3˝ 21.6-65.4˝ 30.8-63.8˝
(63-155cm) (54-163cm) (57-204cm) (55-159cm) (57-199cm) (55-159cm) (37-135cm) (67-153cm) (55-166cm) (78-162cm)
Weight 1.3 lbs. 1.5 lbs. 1.5 lbs. 1.7 lbs. 2 lbs. 2 lbs. 1.5 lbs. 2.3 lbs. 1 lb. 14 oz.
(567g) (680g) (680g) (794g) (907kg) (907kg) (680g) (1kg) (450g) (395g)
Subject to change without notice
Tripods in the series 00 to 3 come complete with Rapid (Sliding) or Geared center columns. The Inter Pro Studex, Pro Studex and Tele Studex
ranges have interchangeable columns available as Rapid (Sliding) single lift reversible or double lift for extra height, or geared for superfine
control. Very short columns are also available for very low angle work.
G527
Measures 5˝ (12.7cm). 4 tripods. The extra low col-
G528
G526
G525
G524
Item # GIG135C ...............27.95 umn can also be used with the
432
G335C
G235C
G135C
Extra Low
Center
Columns
G317
G315
We Ship Worldwide
G I T Z O
A C C E S S O R I E S A N D B A G S
Levelling Bases Lateral Arms
CAMERA SUPPORTS
Levelling bases have a 15° Lateral arms enable cameras to be positioned above or below the tripod in a 90° position, which might oth-
adjustment and have a built-in erwise be obstructed by the tripod legs. They are available in rapid and geared versions and include a
spirit level. Positioning is locked reversible 1⁄4 and 3⁄8˝ mounting stud.
with a toggle lever. They are
used with the center columns Sliding Lateral Arm (G530) Geared Lateral Arm (G535) Right Angle Bracket (G541)
removed. Recommended for Series 1 Recommended for Series 3 With movable graduated base
tripods. Measures 11.3˝ tripods. Measures 12.7˝ to allow panning. Requires a
Levelling Base (G321) (29cm). (32cm). Circular Camera Platform
Fits Interpro tripods. Item # GIG530................57.50 Item # GIG535..............326.95 G349 or G449.
Maximum load is 22 lbs. Item # GIG541..............133.50
(10kg). Geared Lateral Arm (G531) Right Angle Bracket (G540)
Item # GIG321 ...............168.95 Recommended for Series 1 Converts Series 4 and 5 center Circular
tripods. Measures 10.1˝ columns into lateral arms. Camera Platform (G349)
Levelling Base (G421) (26cm). Requires #G349 or #G449 For Interpro Series 3 tripods.
Fits Series 4 and 5 Pro Studex Item # GIG531..............229.50 platform. The circular camera platform
433
and Tele Studex tripods. Item # GIG540................39.95 can be used flat as is, (note:
Maximum load is 44 lbs. Sliding Lateral Arm (G532) center column must be
(20kg). Recommended for Series 2 removed) or with either the
Item # GIG421 ...............168.95 tripods. Measures 13˝ (33cm). #G540 or #G541 right angle
Item #GIG532.................98.95 bracket.
Levelling Base (G421CR) Gitzo Item # GIG349................19.95
Same as above, with geared Geared Lateral Arm (G533) Right
column. Maximum load is 33 Recommended for Series 2 Angle ➧ Circular
lbs. (15kg). tripods. Measures 13˝ (33cm). Bracket Camera Platform (G449)
Item # GIG421CR ..........404.95 Item # GIG533..............281.95 (G541) Same as the Circular Camera
Platform (G349), for Series 4
Levelling Base (G421RA) Sliding Lateral Arm (G534) and 5 tripods.
Same as above, with rapid col- Recommended for Series 3 Item # GIG449................19.95
umn. Maximum load is 33 lbs. tripods. Measures 13.5˝
(15kg). (34cm). ➧ Gitzo Circular
Item # GIG421RA ..........216.50 Item # GIG534..............113.50 Camera Platform (G449)
Tripod Bags
The durable, showerproof Tripod Bag for Series 3 (GE3) Tripod Bag for Series 5 (GE5) Padded Tripod Bag
Gitzo padded and standard Length 37˝ (94cm). Length 42˝ (17cm) for Series 2 (GE2P)
tripod bags have been designed Item # GIGE3 ...................67.50 Item # GIGE5 ...................86.50 Length 33˝ (84cm).
to carry all sizes of tripods and Item # GIGE2P.................89.95
heads. And they have been Tripod Bag Padded Tripod Bag for Series
built to last. Practical and styl- for Series 4 (GE4) 1 (GE1P)
Padded Tripod Bag
ish, the bags all have zip fasten- Length 38.5˝ (98cm). Length 27.5˝ (70cm). for Series 3 (GE3P)
ers for quick and easy access. Item # GIGE4 ...................73.50 Item # GIGE1P.................86.95 Length 37˝ (94cm).
Item # GIGE3P ..............107.95
Tripod Bag for Series 0 (GE0)
Length 21.5˝ (55cm).
Padded Tripod Bag
Item # GIGE0 ...................49.95 or Series 4 (GE4P)
Tripod Bag for Series 1 (GE1) Length 38.3˝ (97cm).
Length 27.5˝ (70cm). Item # GIGE4P ..............127.50
Item # GIGE1 ...................52.95
Padded Tripod Bag
Tripod Bag for Series 2 (GE2) for Series 5 (GE5P)
Length 33˝ (84cm). Length 42˝ (107cm).
Item # GIGE2 ...................59.50 Item # GIGE5P ..............146.95
(G392)
lenses, film, filters, etc. Fits Leg
Series 0, 1 and 2 tripod legs. Protector For G170, G172, G272, G372,
Item # GIG088S ...............58.50 (G090-10B) G472, G275, G375 and G376.
Item # GID17238................5.95
Tripod Apron Large (G088L)
Same as above. Fits Series 3, 4
3
⁄8˝ Replacement
and 5 tripod legs. Locking Wheel (D172-39)
Item # GIG088L ...............62.50 Tripod Leg Protectors (G09110G) For G170, G172, G272, G372,
Adapters, Platforms, Brackets Same as above, in Camouflage Green. G472, G275, G375 and G376.
All Weather Shoes (G1586) Item # GIG09110G...........28.95 Item # GID17239................5.95
100mm Bowl Adapter (G1423) Provides stability in snow,
mud, sand, etc. Set of 3. Tripod Leg Protectors (G09014B)
1
⁄4˝ Replacement
A half shaped bowl which Mounting Screw (D050-25)
mounts onto Series 3, 4 and 5 Item # GIG1586 ...............16.95 Black material. Fits Interpro
tripods. series tripods. For G270, G370, G470, G570 and G475.
Tripod Carrying Strap Black (G087B) Item # GID05025................5.95
Item # GIG1423 ...............48.50 Item # GIG09014B...........28.95
Single size adjustable no-slip
padded strap. Fits all tripods.
3
⁄8˝ Mounting Screw (D050-26)
75mm Bowl Tripod Leg Protectors (G091-14G)
44˝ (115cm) long. For G270, G370, G470, G570 and G475.
Interface Adapter (G1422) Same as above, in Camouflage Green.
Item # GIG087B ...............23.50 Item # GID05026................5.95
Item # GIG1422 ...............44.95 Item # GIG09114G...........28.95
3
⁄8˝ Replacement
100mm Bowl Tripod Leg Protectors (G090-12B) Locking Wheel (D150-27)
Interface Adapter (G1424) Black material. Fits Pro Studex For G270, G370, G470, G570 and G475.
Item # GIG1424 ...............62.95 series tripods. Item # GID15027................5.95
Item # GIG09012B...........28.95
Double Camera Platform (G1584) Replacement Collar Wrench (D340-52)
Measures 11˝ (28cm). Tripod Leg Protectors (G091-12G) For Inter Pro, Pro and
Item # GIG1584 ...............65.95 Same as above, in Camouflage Green. Tele-Studex Tripods.
Item # GIG09112G...........28.95 Item # GID34052................5.95
Double Camera Platform (G1539)
Tripod Carrying Strap
Measures 17˝ (43cm). Green (G087G) Brass Bushings
Item # GIG1539 ...............98.95 Same as above, in Camouflage
Green. Brass Bushing 4.5mm (G1140) Brass Bushing 10mm (G1143)
Offset Bracket (G583)
Item # GIG087G...............23.50 1
⁄4-20˝ to 3⁄8˝. 1
⁄4-20˝ to 3⁄8˝.
Used with cameras with hand
grip, polaroid backs or large Item # GIG1140...................3.50 Item # GIG1143...................3.50
Monitor Platform (G065)
lenses to offset the center. Brass Bushing 7.5mm (G1141) 10mm Bushing (G1145)
A 13x15.7˝ (33x40cm) plat-
Item # GIG583 .................49.95 form which can be fitted to any 1
⁄4-20˝ to 3⁄8˝. For microphone adapter 3⁄8˝ to 5⁄8˝.
Gitzo tripod. Safely supports Item # GIG1141...................3.50 Item # GIG1145...................6.50
supplementary equipment,
such as monitors, mixers, tape Brass Bushing 8.6mm (G1142)
recorders and projectors. 1
⁄4-20˝ to 3⁄8˝.
Double Camera Platform (G1584) Item # GIG065 .................68.50 Item # GIG1142...................3.50
SM
® ®
G I T Z O
QUICK RELEASE, PLATES AND FISHPOLES
Quick Release Adapters and Plates
CAMERA SUPPORTS
Quick Release Adapters are Quick Release (G386-38) Mounting Plate (G1373-38)
Quick Release
designed to be used with tripods Same as above, with two 3⁄8˝ Adapter
2.7 x 2.4˝ (6.7 x 6cm), with 3⁄8˝
or tripod heads which do not camera mounting screws. (G1385) screw. Fits G1285, G1276 and
have the Quick Release feature. Item # GIG38638 .............79.95 G1172.
Item # GIG137338 ...........25.95
Quick Release (G385-14) Mounting Plate (G387-14)
With 3x1.7˝ (7.6x4.4cm) Replacement for #G385-14, Long Mounting Plate (G1174-14)
#G387-14 mounting plate and with 1⁄4-20˝ screw. 4.7 x 1.8˝ (12 x 4.6cm), with
1
⁄4-20˝ camera mounting screw. Item # GIG38714 .............27.95 two 1⁄4-20˝ screws. Fits G1285,
Item # GIG38514 .............74.95 G1276 and G1172.
Mounting Plate (G387-38) Quick Release Adapter (G1385) Item # GIG117414 ...........29.50
Replacement for #G385-38, With 2.7 x 2.4˝ (6.7 x 6cm)
with 3⁄8˝ screw. G1373-14 mounting plate and Long Mounting Plate (G1174-38)
Item # GIG38738 .............27.95
1
⁄4-20˝ camera mounting screw. Same as above, with two 3⁄8˝ screws.
Item # GIG1385 ...............97.50 Item # GIG117438 ...........32.95
435
Mounting Plate (G388-14)
Replacement for #G386-14. Mounting Plate (G1173-14) Long Mounting Plate (G1374-14)
With 1⁄4-20˝ screw. Replacement for G1285, G1276 5.9 x 2.4˝ (15 x 6cm), with two
Quick Release (G385-38) Item # GIG38814 .............34.50 and G1172. 1⁄4-20˝ screw. 1
⁄4-20˝ screws. Fits G1285,
Item # GIG117314 ...........25.95 G1276 and G1172.
Quick Release (G385-38) Mounting Plate (G388-38) Item # GIG137414 ...........32.95
Same as above, with 3⁄8˝ camera Replacement for #G386-38. Mounting Plate (G1173-38)
mounting screw. With 3⁄8˝ screw. 2x1.8˝ (5x4.6cm) with 3⁄8˝ screw. Long Mounting Plate (G1374-38)
Item # GIG38538 .............74.95 Item # GIG38838 .............34.50 Fits G1285, G1276 and G1172. Same as above, with two 3⁄8˝ screws.
Item # GIG117338 ...........25.95 Item # GIG137438 ...........32.95
Quick Release (G386-14) Quick Release Adapter (G1285)
With 6x1.7˝ (15.2x4.4cm) With 2x1.8˝ (5x4.6cm) G1173- Mounting Plate (G1373-14)
Assorted
#G388-14 mounting plate and 14 mounting plate and 1⁄4-20˝ Replacement for G1385, G1372 Gitzo
1
⁄4-20˝ camera mounting screws. camera mounting screw. and G1576. 1⁄4-20˝ screw. mounting
Item # GIG38614 .............79.95 Item # GIG1285 ...............76.95 Item # GIG137314 ...........25.95 plates
Fish Poles
Fishpoles acquired their name because of their resem- Sport 4-Section Fishpole (G557) Studex 6-Section Fishpole (G7680)
blance to fishpoles. They are used to mount cameras, Item # GIG557 ............. 108.95 Item # GIG7680 ............162.95
lights or microphones and to direct them into tight or
Microphone
crowded spots. All fishpoles feature rubber hand grips Shock Mount
and come with 1⁄4-20˝ and 3⁄8˝ reversible mounting (G11510)
screws. They support up to 5 lbs. (2.26kg) of weight. Microphone Shock Mount (G11510)
Adjustable microphone stock mount. It fits all fishpoles with a 3⁄8˝
Loisir Weekend mounting screw. The shock mount will accommodate .75 x 1.5˝
2-Section Fishpole (G555) 3-Section Fishpole (G556) (1.9 x 3.8cm) microphones.
Item # GIG555........76.95 Item # GIG556........82.50 Item # GIG11510.......................................................................99.95
FISHPOLES SPECIFICATIONS
MODEL # G555 G556 G557 G7680
Sections 2 3 4 6
Extends to 55˝ (140cm) 79˝ (200cm) 103.7˝ (263cm) 150˝ (381cm)
Folds to 30.3˝ (77cm) 31.7˝ (81cm) 30.7˝ (78cm) 31˝ (79cm)
Weight 14 oz. (392g) 1 lb. (450g) 1.7 lbs. (794g) 3 lbs. (1360g)
Subject to change without notice
weight, heavy duty professional tripods, tripod ing features of Linhof tripods. Modern lightweight
heads and accessories for photographic, video- construction techniques and the use of only the
graphic or audio visual needs. Linhof professional finest materials, combined with hard anodizing of
tripods are made to the same exacting quality all tripod legs and columns, assure absolutely cor-
standards and materials as Linhof cameras. They rosion-proof surfaces and a long service life.
are respected by demanding photographers the Linhof professional tripods are made in different
world over, for their outstanding quality, superior types and sizes and a wide variety of matching tri-
design, immaculate finish, maximum stability pod heads, dollies and special accessories are
and freedom from vibration. Oversized control available for all models.
436
Tripod Legs
Lightweight Pro 2-Section Tripod (003319) Profi-Port 3-Section Tripod (003449) Twin Shank Profile
With 003753 dual threaded 77mm top plate. With 003845 dual threaded 42mm top Expert 2-Section Tripod (003317)
Comes with removable 1⁄4-20˝ and 3⁄8˝ 77mm top plate. The Profi-Port is an extremely With 003753 dual threaded 77mm top
plate, rapid clamp locks, a 35mm diameter sliding compact and portable tripod. A sliding plate. Features large leg mount collar
center column and built-in spirit level. 2-section 35mm diameter center post and twin shank upper leg sections for
Item # LITLWP2S .........................................289.95 extends to full working heights. One of extra sturdiness, removable struts for
the legs has a tripod thread for close- individually adjustable leg spread, slid-
Lightweight Pro 2-Section up photography at ground level. Rapid ing reversible 35mm diameter
Pneumatic Tripod (003320) clamp locks, built-in spirit level, reversible center post with a reversible
With 003753 dual threaded 77mm top plate. Same removable 1⁄4-20˝ and a 3⁄8˝ top plate 1
⁄4-20˝ and 3⁄8˝ 77mm top plate and
as above, with pneumatically damped center post make this tripod perfect for the travel- extreme rigidity, making this tripod
for smooth height adjustment of equipment. ing photographer. the choice for professionals.
Item # LITLWPAC ........................................369.95 Item # LITPP.............................329.95 Item # LITE ...............................722.50
Twin Shank
Profile
Lightweight Expert
Pro 2-Section Profi-Port 2-Section
Pneumatic 3-Section Tripod
Tripod Tripod (003317)
(003320) (003449)
All items are complete with all accessories as supplied by the manufacturer
L I N H O F
T R I P O D S
Heavy Duty Pro Tripod Legs
CAMERA SUPPORTS
Heavy Duty Pro 2-Section Profi III 3-Section Tripod (003454)
Tripod (003323) Heavy Duty With #031482 90mm top plate Profi III
With #031482 90mm top plate Pro and 3⁄8˝ screw. Whether way up 3-Section
and 3⁄8˝ screw. The classic and 2-Section high or close to the ground, it Tripod
sturdiest 2-sectional heavy Tripod is no problem for Linhof’s (003454)
(003323)
duty tripod for all applications, Profi 3 system with the rotating
featuring robust twin-shank leg locks. Features three heavy
aluminum tubes with plastic duty tubular extensions, the
covering. Extremely stable, top section protected by a
oversized leg mount collar durable plastic covering - the
assures vibration-free camera ultimate in compact profes-
operation. Tripod braces sional tripod design. Variable
guarantee absolute fixed leg spread through adjustable
positioning, even on smooth stops allow firm positioning of
surfaces. Leg extension can be tripod legs in three different
locked to any desired height by working heights. Rugged lock-
437
eccentric clamps. Removable ing sleeves control leg exten-
center tube and detachable sion. Integrated heavy duty ele-
struts allow variable leg spread. vator center post. Column can
Incorporated spirit level. The be inverted or removed. Gear
tripod feet are convertible drive is equipped with self-
from metal tips to rubber locking friction brake that can
pads, making it suitable for be adjusted to the weight of the
all surfaces. equipment attached.
Item # LITHDP ...........1817.50 Item # LITP3................2089.95
Uni Quick Pan Tilt Head (003674) Quick Release Plate (003875) Large Levelling Head 3⁄8˝ (003659) Levelling Pan/Tilt Head 77 (003667)
With 003875 4x2˝ (10x5.3cm) Replacement for Uni Quick Heavy duty head for smooth Compact and extremely sturdy
quick release plate and 1⁄4˝ and Pan Tilt Head (003674). omnidirectional 15° levelling levelling pan/tilt head with
3
⁄8˝ screws. Extremely smooth Item # LIQRPQF1 ..........39.95 and vibration-free support of integrated dove-tail quick-lock
fluid like panning, positive heavier cameras, powerful tele base permitting direct insertion
locks for tilts, quick release lenses and other optical instru- of Linhof Kardan ST-
mounting plate and a load ments. 3⁄8˝ tripod thread and E/GTL/TL/TE cameras which
capacity of 9 lbs. (4kg) make camera screw. 77mm base and slide back and forth to control
this an ideal choice for the top plate. Maximum load taking ratio without moving
photographer on the go. capacity 22 lbs. (10kg). Weighs the tripod. For other equip-
Height is 16 oz. (450g). ment, a quick-change plate
4.5˝ Item # LILH38L............357.95 (#003853) is available. Dual
(11.5cm) locking struts anchor the cam-
and weight 2.5 lbs. (1.1kg). Large Levelling Head 1⁄4˝ (003664) era positively at any angle from
Item # LIPHU...............342.95 Same as above, but with 1⁄4˝ tri- 0 to over 90°. Oversized lock-
pod thread and camera screw. ing elements for lateral level-
438
Profi III Universal Pan/Tilt Item # LILH.25L...........357.95 ling (15° to either side) and
Uni Quick Pan Tilt Head (003674)
Head (003669) pan rotation. 77mm diameter
With 003877 quick release 3-Way Levelling Head (003663) base plate ; 3⁄8˝ tripod socket.
plate. Heavy duty levelling Profi 3 Combines Height 3˝ (7.5m), weighs 3 lbs.
pan/tilt head for use with cam- Quick Release Plate (003877) flexibility (1.2kg).
eras or instruments requiring Replacement for the Profi III and light Item # LILH77Q...........794.50
secure orientation. Individual Universal Pan/Tilt Head weight
oversized locks on all move- (003669). with Levelling Pan/Tilt
ments, operated by locking Item # LIQRPQF2 ..........39.95 extremely Head 90 (003668)
spindles or large clamp levers. compact size Same as above, but with 90mm
Linear horizontal levelling and maxi- diameter base plate. Height
Profi III Universal Pan/Tilt Head
motion (15° to either side), (003669) mum stabili- 3.5˝, weighs 3.5 lbs. (1.7kg).
over 90° vertical tilt forward, ty. Eccentric locking levers Item # LILH90..............781.95
30° backward, extremely positively secure the camera at
smooth 360° panning. Self- any angle. Holds camera with Quick Release Plate (003853)
locking quick-change plate tele photo lenses and view cam- Optional accessory mounting
with dual safety catches eras up to 5x7. Especially suitable plate for levelling pan/tilt head
(securely mounts to cameras for precise camera adjustment in #003667/68. With 1⁄4˝ and 3⁄8˝
with aid of Allen wrench). copy work. Tilt motions and pan retaining screws. Slides into
Maximum load capacity 26 lbs. rotation lock separately. 77 dovetail base of above heads and
(12kg). 90mm diameter base diameter top plate with 1⁄4˝ and allows attachment of other than
plate with 3⁄8˝ tripod bushing. 3
⁄8˝ camera screws. 77mm Kardan type cameras. Safety
Height 6.5˝ (16.5cm), weight diameter base plate. Weighs 32 click-stops and positive locks for
7.5 lbs. (3.4kg). oz. (900g). secure camera positioning.
Item # LIPHP3 ...........1563.95 Item # LILH1................684.95 Item # LIQRP ...............105.95
CAMERA SUPPORTS
Mini Profi III Ballhead (003650) Profi III Ballhead (063675)
Universal Ball
Tiltop Ballhead (003633) Head 1 Sturdy, heavy duty ballhead for This heavy-duty precision ball-
Compact, extremely light, all (003681) precise omni-directional posi- head is the same as the Profi III
metal ballhead. Ideal for com- tioning of heavy cameras with a Ballhead (003650), with an
pact 35mm cameras, double load capacity of 22 lbs. (10kg). 80mm base diameter and dual
wing nut for positive lock, and Precision engineering combined threaded 42mm diameter
1
⁄4˝ screw. Weighs just 4 oz. with friction adjustment guaran- reversible top plate.
(100g). tees secure camera orientation Item # LIBHP342 ..........449.00
Item # LIMTT ..................78.50 and safe operation. Individual
lockable smooth ball movement Profi III Ballhead
Universal Profi II Ballhead with Quick and pan rotation, panorama with Quick Release (003680)
Ballhead 1 (003681) Release (003679) scale with zero index. 90mm Same as the Profi III Ballhead
All metal ballhead with Same as above, but with built- base diameter, dual threaded (003675), with a 80 base diam-
reversible 42mm top plate. in quick release and 2.8x2˝ 77mm diameter reversible top eter, but with built-in quick
Height 3.1˝ (8cm). Weighs 9.5 (7x5cm) quick release plate. plate. Weighs 2 lbs. (1.4kg). release and 2x3.9˝ (5x10cm)
oz. (270g). Height 4.5˝ (11cm), weighs Item # LIBHP377Q .......648.95 quick release plate.
439
Item # LIPBH01...............86.95 26.6 oz. (754g). Item # LIBHP3QF2 .......559.95
Item # LIBHP2QF1 .......389.00 Profi III Ballhead (003675)
Universal Same as above, with an 80mm Quick Release
Ballhead 1 Panorama (003677) Quick Release Plate (003875) base diameter and dual thread- Plate II (003877)
All metal ballhead with large 2.8x2˝ (7x5cm) plate. ed 77mm diameter reversible Replacement for above, Model
knobs and individually lock- Replacement for Model 003679. top plate. #003680.
able panorama movement. Item # LIQRPQF1 ...........39.95 Item # LIBHP377 ..........459.95 Item # LIQRPQF2 ...........39.95
Dual threaded 42mm top plate.
Height 3.7˝ (9.5cm), weighs 10
oz. (286g). (003650)
Item # LIPBH1 ..............134.95
➧
Precision
Precision Micro Drive Cradle Head (003672) Cradle Head (003671)
Same as the Precision Cradle Head (003671), but with additional
micro drives for extremely accurate pan and tilt control providing a
±5 minimum micro adjustment range in any position. The separate Precision Micro Driven
➧
440
micro drives can be disengaged to allow rapid changes of basic Cradle Head (003672)
instrument position. Vertical tilt range ±21°. Vernier adjustment
accuracy 5 min. Weight 11 lbs. (5kg).
Item # LIPHMD.......................................................................4259.95
CAMERA SUPPORTS
Linhof manufactures matching Tripod Case (023321) Tripod Case (023304) Tripod Case (023308)
carrying cases with a zippered Length 20˝ (52cm). Length 34˝ (87cm). Length 41˝ (105cm).
closure and a handy shoulder Item # LITCPP ................76.50 Item # LITCLWP3S.......109.95 Item # LITCP3...............349.95
strap for easy carrying, that is Tripod Case (023305) Tripod Case (023313) Tripod Case (023309)
made of durable fabric and is Length 30˝ (76cm). Length 38˝ (97cm). Length 47˝ (120cm).
available in neutral shades. Item # LITCRSV..............87.50 Item # LITCE.................112.50 Item # LITCHDP...........368.95
Projection Accessory Extension Column (003764) All brass retaining screws for
Sliding
Platform 30mm (003762) At 24˝ (60cm), extends the Linhof tripod heads, with small
Zoom 8.5x13˝ (22x34cm). Fits into working height of larger pro- and larger plastic locking knobs.
Rail 30mm center column. Includes fessional tripods. Fits into Available in 1⁄4˝ and 3⁄8˝ sizes, as
clamp.
441
(003858) 90mm diameter collars of below.
Item # LIPP30 ..............109.95 Models #003343 and #003454,
or can be screwed onto any flat Small Camera Screw 1⁄4˝
Sliding Zoom Rail (003858) tripod plate. Has 90mm diam- (003769)
Rigid extrusion profile mono- eter clamp mount on top. Item # LITS.25S..............19.50
rail 30˝ (750mm), with sliding
Item # LICE24 ..............579.95
support that allows smooth Small Camera Screw 3⁄8˝
camera and instrument dis- (003773)
R/A Outrigger
placements up to 700mm/27.5˝ Item # LITS38S...............19.50
without moving the camera Adapter 90mm (003776)
stand. Particularly useful for For Profi III #003454 and Large Camera Screw 1⁄4˝ (003774)
table-tops and extreme close- Heavy Duty Tripod #003323,
Item # LITS.25L..............23.95
ups. Supplied with integrated for horizontal placement of
Outrigger Arm (003754) Quickfix II connector and Large Geared Center post Large Camera Screw 3⁄8˝ (003775)
quick release plate. #003755 or Extension Column Item # LITS38L...............23.95
For mounting Technika cam-
eras upside down (lens drop) Item # LISCZR .............512.95 #003764.
or close to the ground. Also, Item # LIOA90..............609.95 Screw for 3-Way Levelling
Large Geared Head (051644)
for Varioport table columns. Center post
Adjusts to 135-180mm outrig- Flat Tripod Top Plate (032965) Item # LITSLH ...............43.50
(003755)
ger distance. Weighs 11 oz. Fits into 90mm clamp mount.
(300g). For Heavy Duty Flat top 1⁄4˝.
Item # LIOAT ...............167.50 Pro #003323. Item # LITP90.25 ...........69.50
Accessory col-
Projection
Macro/Stereo umn with fric- Flat Tripod Top Plate (031482) Accessory
Focusing Slide (003834) tion-adjustable, Platform
Fits into 90mm clamp mount.
Smooth rack and pinion self-braking rack 30mm
Flat top 3⁄8˝.
adjustment over 7˝ (18cm), and pinion ele- (003762)
vator drive. Fits Item # LITP9038 ............69.50
interchangeable camera screw
1
⁄4˝ and 3⁄8˝, triple adjustable into 90mm
Small Top Plate 42 (003845)
camera positioning. Tripod diameter collar
of Linhof pro- 42mm diameter with 3⁄8˝ and
thread 1⁄4˝ and 3⁄8˝, adjustable 1
fessional tripods ⁄4˝ solid brass camera screws .
dovetail base plate. Weighs 27
oz. (700g). and has 90mm diameter clamp Item # LITPDT42 ...........19.95
Item # LIMSFD ............428.50 mount on top. Height 24˝
(60cm), weight 1.5 lbs. (680g). Large Top Plate 77 (003753)
HD Projection Item # LICCL................824.95 77mm diameter, with 3⁄8˝ and
1
Accessory Platform (003850) ⁄4˝ solid brass camera screws.
For heavy and wide projection 35mm Center Column (003833) Item # LITPDT77 ...........24.95
equipment. 3⁄8˝ tripod bushing With 35mm top plate. Fits
permits mounting to any tri- tripods with 35mm diameter Reducing Bushing (004262)
pod. 12x17˝ (30x42cm). center. From 3⁄8˝ thread to 1⁄4˝.
Item # LIPPHD ............187.95 Item # LICC35..............109.95 Item # LIRB ......................8.95
Traditional manufacturing techniques and hand assembly are employed, utilizing single-leg
tripod shown
steel, aluminum tubing and precision machined alloy casting. All fasteners are with
optional
removable with standard hand tools and, where appropriate, lock washers are gearhead
used where vibration and long wear might loosen a part. All locking screws work
against tension, ensuring that they will not release inadvertently.
Majestic International 5000 Series tripods are offered with black anodized
aluminum legs, dark gray anodized center column, and include a 3⁄8˝ camera
mounting screw. The Classic 5200 Series tripods come with a 11⁄2˝ (3.8cm)
center post, and the 5900 Series come with a 17⁄8˝ (4.76cm) center post.
Majestic tripods are also available with two column extensions. All come
442
with Quicklift ratchet drives which provide 2˝ of vertical motion for each turn
of the gear driven crank.
CAMERA SUPPORTS
5201 1-Section 5227 2-Section 5901 1-Section 5927 2-Section
Single Leg Tripod (852-01) Single Leg Tripod (852-27) Single Leg Tripod (859-01) Single Leg Tripod (859-27)
Item # MA5201 ..............279.95 With center brace Item # MA5901 ..............254.95 With center brace
and extension. and extension.
5203 1-Section Item # MA5227 ..............437.95 5903 1-Section Item # MA5927 ..............373.95
Single Leg Tripod (852-03) Single Leg Tripod (859-03)
With extension. 5241 1-Section With extension. 5941 1-Section
Item # MA5203 ..............309.95 Single Leg Tripod (852-41) Item # MA5903 ..............279.95 Single Leg Tripod (859-41)
With center brace and With center brace and
5205 2-Section 3˝ casters. 5905 2-Section 3˝ casters.
Single Leg Tripod (852-05) Item # MA5241 ..............364.95 Single Leg Tripod (859-05) Item # MA5941 ..............373.95
Item # MA5205 ..............364.95 Item # MA5905 ..............299.95
5243 1-Section 5943 1-Section
5207 2-Section Single Leg Tripod (852-43) 5907 2-Section Single Leg Tripod (859-43)
Single Leg Tripod (852-07) With center brace, extension Single Leg Tripod (859-07) With center brace, extension
443
With extension. and 3˝ casters. With extension. and 3˝ casters.
Item # MA5207 ..............394.95 Item # MA5243 ..............394.95 Item # MA5907 ..............327.50 Item # MA5943 ..............399.50
5221 1-Section 5285 2-Section 5921 1-Section 5985 2-Section
Single Leg Tripod (852-21) Twin Leg Tripod (852-85) Single Leg Tripod (859-21) Twin Leg Tripod (859-85)
With center brace. Item # MA5285 ..............394.95 With center brace. Item # MA5985 ..............339.95
Item # MA5221 ..............322.95 Item # MA5921 ..............299.95
5287 2-Section 5987 2-Section
5223 1-Section Twin Leg Tripod (852-87) 5923 1-Section Twin Leg Tripod (859-87)
Single Leg Tripod (852-23) With extension. Single Leg Tripod (859-23) With extension.
With center brace and extension. Item # MA5287 ..............424.95 With center brace and extension. Item # MA5987 ..............364.95
Item # MA5223 ..............352.95 Item # MA5923 ..............327.50
5225 2-Section Single Leg Tripod (852-25) 5925 2-Section Single Leg Tripod (859-25)
With center brace. With center brace.
Item # MA5225 ..........................................................................407.95 Item # MA5925 ............................................................................348.50
any standard tripod or camera stand, and the interchangeable camera platform allows mounting of virtual- with 6x7
ly any camera. They feature internal gears, rugged aluminum casting and an oversized, self-locking crank. plate
They allow 90° forward tilt, 30° back tilt and 15° tilt from left to right. Weighs 6 lbs. (2.7kg).
1001 Gearhead (810-01) 1003 Gearhead (810-03) 1005 Gearhead (810-05) 1007 Gearhead (810-07)
With 6 x 7˝ (15.2 x 17.8cm) With 6 x 4.5˝ (15.2 x 11.4cm) With 3 x 3.6˝ (7.6 x 9.2cm) With 4.5˝ (11.4cm) round
camera platform. camera platform. camera platform. camera platform.
Item # MA1001 ..............271.95 Item # MA1003 ..............271.95 Item # MA1005 ..............271.95 Item # MA1007 ..............271.95
1201 Gearhead (812-01) 1203 Gearhead (812-03) 1205 Gearhead (812-05) 1207 Gearhead (812-07)
With 6 x 7˝ (15.2 x 17.8cm) With 3 x 3.6˝ (7.6 x 9.2cm) With 4.5˝ (11.4cm) round
444
1901 Gearhead (819-01) 1903 Gearhead (819-03) 1905 Gearhead (819-05) 1907 Gearhead (819-07)
With 6 x 7˝ (15.2 x 17.8cm) With 6 x 4.5˝ (15.2 x 11.4cm) With 3 x 3.6˝ (7.6 x 9.2cm) With 4.5˝ (11.4cm) round
camera platform. camera platform. camera platform. camera platform.
Item # MA1901 ..............254.95 Item # MA1903 ..............254.95 Item # MA1905 ..............254.95 Item # MA1907 ..............254.95
CAMERA SUPPORTS
tripods, it is easy to choose just the right one to hold your camera steady at any
angle, on virtually any terrain, for applications indoors or out. Decades of expe-
rience and a wealth of accumulated photographic knowledge, combined with
state-of-the-art engineering, have been instrumental in helping Slik create
tripods that are amazingly light, yet offer remarkable strength and stability.
Sturdy, amazingly lightweight, compact, take-them-anywhere tripods , designed for compact cameras , give steady support at all times.
445
that is perfect for tabletop, macro and copy Minipod imaging cameras and camcorders weighing up
photography. Great on any available ledge. (611-450) to 23⁄4 lbs. as either a table pod or chest pod. The
Reversible center column for low angle and Mini Tripod travels anywhere, can be easily car-
copy work. Double extension center column ried in a camera case, and sets up in an instant.
and four leg extensions allow it to rise to almost A suction cup located on the bottom of the cen-
triple its size. Separate pan and tilt control fol- ter column even allows the tripod to be set up on
lows all the action. Easy-to-grip leg locks for the hood of a car. Ideal for table-top, low-angle,
quick adjustments. and close-ups.
Item # SL450G.............................................21.95 Item # SLMT................................................22.50
U9000 (617-900)
Same as above, plus built-in
bubble level.
Item # SLU9000 ...............44.95
505QF (617-505)
A heavy-duty tripod construct-
ed to handle the weight and
size of full size video cameras.
Positive action fluid head for
smooth panning, separate pan
and tilt control locks, single
action, quick release camera
platform with safety lock make
this the true professional
U9000
model. Center column is gear U8000 (617-900)
505QF driven. Legs are tubular design (617-800)
(617-505) with braces for maximum
stability.
Item # SL505QF.............174.95
CAMERA SUPPORTS
U212 Deluxe (612-212) 300 Deluxe (615-310)
With quick release post. The U212 Deluxe With quick release platform. Features “D”
is an all-purpose tripod. Features include shaped closed leg extensions that provide
rectangular legs with retractable rubber leg maximum strength. Each leg angle can be
tips and spikes. Each leg angle can be indi- individually adjusted for surfaces and
vidually adjusted to compensate for ground level shots. An omni-directional
unusual surfaces and ground level shots. quick release permits easy mounting or
Geared center column tension control removal. The quick release is positioned
gives the right support for varying camera on a 3-way panhead with separate locking
weights. Includes a bubble level and a controls for pan and tilt. “Lift-n-Lock”
quick release camera post that makes cam- center column features oversized locking
era mounting and removal fast and easy. collar. Rubber leg tips provide maximum
Threaded panhead mounting post on one traction outdoors and protection to sur-
U212
leg is ideal for low-angle photography. For faces indoors. Other features include the
Deluxe
shooting vertically, a camera locking brace (612-212)
optional short center column, permitting
provides a tight camera-to-tripod mount tripod use as low as 14˝ (35cm).
447
300 Deluxe
which prevents camera slipping. Other (615-300) Item # SL300DX..................................89.95
U212 Deluxe features include the capacity
to accept a lens or flash caddy. Pro Tripod 700DX (615-315)
Item # SLU212.....................................74.95 With Pro 700 DX Pan Head cylindrical
shaped quick release. Using Tri-Titanium,
a super-strength alloy comprised of alu-
DELUXE TRIPOD SPECIFICATIONS minum, magnesium and titanium, the Pro
Model U212 DLX 300 DX 700 DX 700 DX has a strength-to-weight ratio
more than 40% greater than comparable
Load Capacity 5.5 lbs. (2.5kg) 11 lbs. (5kg) 15 lbs. (7kg) tripods. Individual leg angle adjustments
Minimum Usable Height 0 0 *24.4˝ (62cm) permit three distinctive settings for unusu-
al terrain or low-angle camera use. The
Maximum Extension 63˝ (160cm) 61˝ (155cm) 74.8˝ (190cm) three-way removable pan head features
Leg Sections 3 3 3 individual locking controls for pan and
tilt, as well as 360° rotation of its quick
Center Column Sections 1 1 1
release platform and two bubble levels.
Folded Length 27˝ (69cm) 26˝ (66cm) 29.9˝ (76cm) The flat base of the quick release permits
Weight 6 lbs. (2.7kg) 5.5 lbs. (2.5 kg) 7 lbs. (3.2kg) setting equipment down without concern
of tipping it over.
Subject to change without notice * with standard column
Item # SL700DX................................174.95
Ballheads Panheads
Compact Ballhead (618-710) Pro Ballhead 800 (618-708) Panheads feature a large camera platform with interchangeable 1⁄4˝
Use with compact cameras. With quick release. For medi- and 3⁄8˝ camera mounting screws and a non-slip cork pad for tight,
Allows orientation of camera um format cameras. features positive camera-to-tripod mounting. The smooth 3-way pan-
to almost any angle without dual action rotating quick head, complete with dual axis bubble levels, permits quick and
use of a panhead. release platform and extra large easy establishment of vertical and horizontal positions. The
Item # SLBHC ..................24.99 rubberized locking knobs.
ergonomically designed extra large, extra long handles and knobs
Item # SLBHP800 ............89.95
assure quick, responsive control of all panhead movement, and
Standard Ballhead II (618-709) the oversized space provided under the panhead camera plat-
Super Ballhead (618-705)
For use with most cameras. forms allow you to comfortably reach the camera mounting screw
Handles diverse, ultra heavy-
Features a large padded camera to quickly secure the camera.
duty assignments with up to
stage for stability. large format cameras. Its maxi-
Item # SLBHS2.................39.99 mum load is 30 lbs. Provides Standard Panhead (619-715) Heavy-Duty
smooth, easy to use operation. The Standard Panhead is a Panhead (619-750)
Pro Ballhead (618-706) Separate pan lock and fine tun- professional 3-way panhead The Heavy-Duty Panhead is a
For heavy-duty professional ing adjustments assure precise with a load capacity of 16 lbs. professional 3-way panhead
use. Extra large controls for control and minimizes the (7.3kg). It weighs 3.3 lbs. with a load capacity of 22 lbs.
easy handling. chance of tipping. (1.5kg). (10kg), weighing 4 lbs. (1.8kg).
Item # SLBHP ..................72.99 Item # SLBHS.................219.95 Item # SLP2H ...............164.95 Item # SLPH .................197.50
Pro Heavy-Duty
Compact Panhead
Ballhead
Ballhead (619-750)
(618-706)
(618-710)
Standard Super
Ballhead II Ballhead
(618-709) (618-705)
CAMERA SUPPORTS
AF2100 Pistol Grip Head (618-210) Auto Fast 322 AF II Tripod (614-555)
With quick release plate. A unique patented single action pistol grip With quick release plate. The easiest to use, fastest operating tripod
head. Just squeeze the trigger, set it to the desired position, release available. Includes AF2100 pistol grip head. Enables any angle
the trigger and your camera is locked right where you want it. Can movement with one touch. Head has bubble level which accurately
be used with all makes and models of tripods that have 1⁄4 x 20˝ or 3⁄8˝ establishes vertical position for tripod. Center column has tension
threaded center column posts. Quick release plate allows fast action control which sits on a geared elevator, to compensate different
mounting or removal of the camera platform. Base diameter is 2˝ weights. Legs can be opened to a low angle for macro and close-up
(51cm), height 5.3˝ (13.3cm) and weighs 30 oz. (850g). photography.
Item # SLAF2100..........................................................................59.95 Item # SL322AF2........................................................................184.90
449
Maximum Extension 64˝ (163cm)
Leg sections 3
Center Column Sections 1
AF2100 Pistol Grip
Folded Length 29˝ (72cm)
Head (610-210)
Weight 6.4 lbs. (2.9kg)
Subject to change without notice
Monopods
Lighter and more compact than E-Z Pod Jr (617-200) E-Z Pod (617-400)
a tripod, a unipod offers greater With wrist strap. This unique unipod was specifically created to be With a quick release rubber
mobility for fast-moving action. compatible with today’s popular, lightweight cameras and cam- padded camera platform.
Ideal for use where space is lim- corders. So compact when folded, (just 201⁄4˝), it can be taken any- Unique anti-gravity adjustment
ited and for traveling and back- where. The quick release, rubber padded platform is perfect for system offers easy, precise,
packing, too. instant camera mounting and removal. Panhead adjusts for desired push button controlled eye-
tilt movement. Five section, rigid tubular leg extends to a full 63˝. level camera height setting,
Slim Pod (618-724) Single action, speed release locks. quickly and smoothly. Take it
Sturdy, tubular leg design, with Item # SLEZPJ ..............................................................................31.95 anywhere. Perfect for sporting
single-action speed release leg events. Other features include
locks for maximum rigidity an adjustable panhead for
and fast setup. Four leg sec- Light smooth tilt movement and
tions offer eye-level operation. Pod II single action, and speed
An adjustable panhead pro- (618-725) release leg locks for fast setup
vides vertical tilt and horizon- and fold-down.
tal panning action. Item # SLEZP ...................41.95
Item # SLSP ......................19.95
Pro Pro Pod (618-720)
Light Pod II (618-725) Pod With strap. An ultra heavy-
Features a compact ballhead E-Z (618-720) duty professional unipod, built
for quick and smooth position Pod sturdily enough to handle
changes, plus easy-to-operate (617-400) heavy weight. Grooved tubular
flip lock leg levers. Grooved leg extends smoothly and will
design prevents leg rotation not turn while leg locks are
E-Z
while locking and unlocking. A Pod Jr
tightened or loosened. Wrist
heavy-duty wrist strap ensures (617-200) strap and “Sof-Touch” rubber
a secure grip. padded grip for comfort.
Item # SLLP2....................44.95 Item # SLPP......................84.95
MONOPOD SPECIFICATIONS
MODEL Slim Pod Lighty Pod II E-Z Pod Jr E-Z Pod Pro Pod
Sections 4 5 5 4 4
Load Capacity 2.8 lbs. (1.2kg) 6.6 lbs. (3kg) 8.5 lbs. (3.9kg) 8.5 lbs. (3.9kg) 11 lbs. (5kg)
Height Range 20-59.5˝ (51-151cm) 20.6-63.3˝ (52-160cm) 20.3-63˝ (51-160cm) 18.5-62.8˝ (47-159cm) 23.8-71.6˝ (60-182cm)
Weight 10 oz. (284g) 16 oz. (454g) 17 oz. (482g) 24 oz. (680g) 37 oz. (1049g)
Subject to change without notice
Tripod Accessories
CAMERA SUPPORTS
videographer. From the lightweight CX series to the heavy-duty Mark series, Velbon maintains a high
degree of quality and consistency throughout its tripod line. Velbon prides itself on supplying the
photo/video market with every style, design and feature needed in a photo/video tripod. It also provides
a wide variety of accompanying accessories such as tripod bags, ball heads, cable releases and a mar-
velously light and reasonably priced quick-release system. Two and three-way pan/tilt heads along with
camcorder alignment pins make Velbon a cost effective purchase for those with multiple needs from a
reliable and user friendly tripod system.
Velbon’s quick set-up system incorporates geared, as well as rapid columns with 1⁄4x20 head screws and
quick side lever locks. Radial leg braces assure stability, while rubber tipped feet prevent unwanted slip-
page. Smooth. positive and friction controlled pan/tilt heads make shooting easier and more enjoyable.
451
No matter what your photographic or videographic need is, Velbon can supply you with a tool that you
can have confidence in.
CX Series Photo/Video Tripods with Heads
CX-300
3-section, 2-way panhead, 20mm tubular legged tripod with radial
leg braces and geared center column. Left side positioned control
handle makes camera controls easily accessible. Available in white
aluminum or black.
Item # VECX300 ..........................................................................19.95
CX-440 CX-544
Same as the CX-300, featuring Dual purpose deluxe tripod
a 3-way pan/tilt head with with a left positioned handle
“Auto-Lock” quick-release and right tilting camera plat-
mechanism (QB-4LC). form for unobstructed access
Item # VECX440 ..............29.50 to camera controls. Vertical
shooting in 35mm is easier, as
CX-540
the platform provides better
The next step in the CX series support for heavier lenses. CX-684
has an extra wide quick-release
Features a large 2-positioned
platform (QB-5LC), as well as
quick-release platform, 27mm
a leveling bubble mounted on
the tripod body. The legs are tubular legs and a bubble level.
constructed of 23mm tubular Titanium bronze color.
aluminum. This is a 3-section Item # VECX544 ..............44.95
tripod, as are all CX tripods.
Features angled gear teeth for CX-684
smoother center column oper- Same as the CX-544, with a
ation. Weighs 3.5 lbs. (1.59kg). large 2-position quick-release CX-544
Available in titanium bronze. camera platform (QB-5W).
Item # VECX540 ..............44.95 Item # VECX684 ..............54.95
Specialty CX Video Tripods DF Series “Dual Function” Photo/Video Tripods with Heads
452
All Specialty CX Video tripods contain 2-way fluid panheads, bubble The DF series is a dual function tripod designed for photo and video
levels, preset friction controls, angled gear teeth, 3-section tubular alu- use. Along with Velbon’s sure-grip pan/tilt control handle located
minum legs, radial braces, quick side lever locks, camcorder alignment on the left side for easy access to camera controls, these tripods fea-
pins, quick-releases and feature a titanium bronze finish. Additional ture 3-sectioned tubular aluminum legs, radial leg braces and quick
features are listed below. side-lever locks. Very stylish in an all black pro finish.
Minimum Usable Height 20.5˝ (52cm) 20.5˝ (52cm) 21.5˝ (54.6cm) 23˝ (58.4cm)
Maximum Extension 57˝ (145cm) 57˝ (145cm) 59.5˝ (151cm) 63.5˝ (161cm)
Leg Sections 3 3 3 3
Folded Length 20.8˝ (52.8cm) 21.0˝ (53.3cm) 22.8˝ (59cm) 23.8˝ (60.5cm)
Weight 2.4 lbs. (1.1kg) 2.6 lbs. (1.2kg) 3.2 lbs. (1.5kg) 4. lbs. (1.8kg)
DF-30 Lightweight, DF-40 Lightweight, DF-50 Standard, DF-60 Heavy Duty
Subject to change without notice
CAMERA SUPPORTS
Mini Tripod (DF-10ML)
TABLETOP AND COMPACT TRIPOD SPECIFICATIONS
With its pro black finish, the
DF-10ML has a 3-way quick- MODEL # DF-10ML VTP-815 Compact TP-1 DH20/4 Mini-F
release panhead and radial Load Capacity 5 lbs. 1 lb. 3 lbs. 4 lbs. 5 lbs.
braces for stability. The rubber (2.3kg) (450g) (1.4kg) (1.8kg) (2.3kg)
tipped feet and quick side-lever
locks make this dual function Minimum Usable Height 11.5˝ 10˝ 3.9˝ 18˝ 6˝
mini tripod a unique addition (29.2cm) (25.4cm) (9.9cm) (45.7cm) (15.2cm)
to the Velbon collection. Maximum Extension 25.2˝ 40.2˝ 3.9˝ 56.5˝ 22˝
Item # VEDF10..................24.95 (64cm) (102cm) (9.9cm) (144cm) (56cm)
453
Weight 1.4 lbs. 17.6 oz. 12.3 oz. 2.3 lbs. 2.5 lbs.
Compact Tabletop Pod (VTP1) (.64kg) (.5kg) (.05kg) (1kg) (1.1kg)
A table-top tripod with foldable Subject to change without notice
accessory shoe and adjustable
platform. Legs can be used as a
handgrip. Features all metal
construction. Victory Series Photo Tripods with Pan Heads
Item # VEVTP1 .................33.50
These full-featured standard
Compact Tripod (DH-20/4) size deluxe tripods are black-
A compact, 4-section extruded matte finished, all featuring
aluminum tripod with geared Victory
center column and 3-way pan- 3-section 23mm sealed legs. 550 Tripod set to
head. In addition to side-lever locks, minimum height
Item # VEDH204...............46.95 they all have steel ground spikes
with retractable round rubber
Mini-F Tripod (Mini F) feet and 3-way die-cast
This full featured mini tripod aluminum panheads.
has much packed into its 22˝
length (maximum extension). Victory 450 Tripod
Geared center column, extra With PH-156Q removable pan- Victory
wide stance aluminum channel head and quick release. The 450 Victory
450 Tripod 550 Tripod
legs, radial braces and non-slip features radial leg braces, as
rubber tipped feet make this 21⁄2 well as a friction adjustable
lb. deluxe system appealing. geared column for ease of verti-
Item # VEMF .....................84.95 cal shooting. VICTORY TRIPOD SPECIFICATIONS
Item # VEV450..................64.95 MODEL # 450 550
Victory 550 Tripod Load Capacity 7 lbs. 6.5 lbs.
With PH-156Q removable pan- (3.2kg) (2.9kg)
head and quick release. The Minimum Usable Height 21.5˝ 8˝
most unique feature of this tri- (54.6cm) (20.3cm)
pod is its individually
adjustable leg spread for ultra- Maximum Extension 58.3˝ 59˝
low level shooting. With a min- (148cm) (149cm)
imum height of only 8 inches, Leg Sections 3 3
ground level shooting with
maximum stability is possible Center Column Sections 2 2
on any terrain. The double cen- Folded Length 22.1˝ (56cm) 22.6˝ (57cm)
ter column easily supports ver-
tical shooting. Weight 3.8 lbs. (1.75kg) 3.8 lbs. (1.75kg)
Mini-F Tripod (Mini F) Subject to change without notice
Item # VEV550..................64.95
The X-series is a line of heavy-duty, full-featured extruded alu- The sturdy, medium-weight Mountain Chaser with
minum tripods designed for maximum stability under a variety of Chaser tripods offer reliability Panhead (MCA)
shooting scenarios. They feature quick-lever leg-lock and friction and durability for the photogra- A very functional tripod which
adjustable geared center columns. pher who requires more of allows individual leg spans for
his/her tripod. The leg assembly normal, semi-low and full low
is die-cast material and extrud- angles. A “Splitable Racked
ed aluminum. The unique Column” makes low angle
design of the 3-way panhead shooting even easier.
allows for better support of Item # VEMCA ..............116.50
longer lenses. The camera
mounting threads are designed Chaser EL-3A Tripod Leg
to tighten against the camera More extended height than
platform. The head is mounted other Chaser tripods, yet it
on a friction adjustable geared collapses to only 25.3˝. With
center column. the optional 3-way die-cast
metal panhead (PH-157)
454
All items are complete with all accessories as supplied by the manufacturer
V E L B O N
T R I P O D S
CHASER SERIES TRIPOD SPECIFICATIONS Carmagne Tripod
CAMERA SUPPORTS
MODEL # Super Handy Mountain EL-3 EFL-3 EFL-4
In response to the demand for
Load Capacity 8 lbs. (3.6kg) 8 lbs. (3.6kg) 8lbs. (3.6kg) 8 lbs. (3.6kg) 8 lbs. (3.6kg) 8 lbs. (3.6kg)
a durable yet lightweight tri-
Minimum Usable Height 0˝ 0˝ 10˝ (25.4cm) 24˝ (61cm) 10.9˝ (27.7cm) 9.6˝ (24.4cm) pod, Velbon has produced the
Maximum Extension 60.5˝ (154cm) 53.5˝ (136cm) 60.6˝ (154cm) 68.0˝ (173cm) 65.9˝ (167cm) 60.4˝ (154cm) Carmagne series. Made of car-
bon fiber and magnesium
Leg Sections 3 4 3 3 4 4
alloy, this 4-section compact
Center Column Sections 1 1 2 1 2 2 tripod offers superior strength
Folded Length 23.5˝ (59.7cm) 19.4˝ (49.3cm) 21.3˝ (54.1cm) 25.3˝ (64.3cm) 25.8˝ (65.5cm) 20.6˝ (52.3cm) and professional specifications.
It is one third lighter than con-
Weight 4.5 lbs. (2kg) 4.3 lbs. (2kg) 4.9 lbs. (2.2kg) 4.5 lbs. (2kg) 4.4 lbs. (2kg) 4.5 lbs. (2kg)
ventional aluminum tripods,
Subject to change without notice
yet strong enough to absorb
vibrations. Carbon fiber is also
Ace Series Tripod Legs Professional Mark Tripod Legs more resilient to temperature
changes and is suitable for all
Heavy-duty pro line with all For the working pro, this series of 35mm and most medium for-
455
metal construction in a titani- tripods is the top of the ladder. mat cameras.
um finish. Created for 35mm With double geared columns and
and medium format cameras, heavy-duty aluminum legs, the Pro Carmagne 640 Tripod Leg
they feature geared columns series can stand up to the most rig- The 640 has a 3-position leg
with angled teeth, as well as orous demands. All feature flanged spread for normal, semi-low
very stable 3-section 28mm collar locks and 3-position legs and full-low angle shooting.
tubular legs, rubber collar spread for normal, low and near Its 2-section center lift column
locks, rubber tipped feet and a ground shooting. The round tubular features a removable lower
carry strap. Super Ace (A) legs have rubber collar locks and section for full low angle
Tripod Leg rubber tipped feet. shooting. The panhead has a
Field Ace (A) Tripod Leg reversible mounting stud for
Allows for individually Mark 6 (A) either 1⁄4˝ or 3⁄8˝ camera mounts.
adjustable leg positioning. Standard size with 30mm legs. The legs are 4-section 28mm
Normal, semi-low and near tubular cross layered carbon
Item # VEM6A........................349.00
ground level (81⁄4˝) positions fiber material. Leg locks are all
are possible. This “grounder” Mark 7 (A) rubber covered for ease of
design makes the tripod useful Similar to the Mark-6, but with handling, and the feet are
on a variety of terrains. more extended height capability and rubber tipped. With its pro
Item # VEFAA ................223.95 heavier weight. black finish, this tripod is a
Item # VEM7A........................419.95 real pro tool.
Super Ace (A) Tripod Leg
Item # VEC640 ...............439.95
Similar to the Field Ace, but
Mark-7 Mini (A)
with radial leg braces and
more maximum height. Thick 33mm legs make this tripod a
Field Ace (A) great choice for low angle or close-
Item # VESAA ................236.50
Tripod Leg up photography.
For Ace Series specifications, see next page Item # VEM7MA ....................379.95
Weight 6 lbs. (2.75kg) 5 lbs. (2.3kg) 7.5 lbs. (3.4kg) 2.93 lbs. (1.3kg)
Subject to change without notice
MONOPOD SPECIFICATIONS
MODEL # UP-4000 UP-4DXII PUX-3 UP-43 UP-40 MUP-4 CUP-40
Weight lbs. (kg) 14.1 oz. (400g) 24 oz. (680g) 27 oz. (765g) 16oz (453g) 12.3oz. (348g) 29oz (815g) 13.8 oz (380g)
Minimum Height 20.1˝ (51cm) 22˝ (55.9cm) 25.2˝ (64cm) 20.5˝ (52cm) 18.3˝ (46.4cm) 19.5˝ (49.5cm) 19.3˝ (49cm)
Maximum Height 63.2˝ (161cm) 65.5˝ (166cm) 59.5˝ (151cm) 63˝ (160cm) 60.9˝ (155cm) 61.8˝ (157cm) 60.2˝ (153cm)
Subject to change without notice
CAMERA SUPPORTS
Compact Ball Magnesium Alloy Quick- Magnesium Alloy Quick DL-10 Lightweight Dolly
Head Socket (PH-243) Release Adapter (QRA-635) Release Adapter (QRA-667) A lightweight dolly for stan-
Mini compact ball head with Specifically designed for 35mm Same as QRA-635, but for 6x6 dard size tripods. Features a
single lever operation. cameras, this amazingly light and 6x7 cameras. Weighs 5oz flip-up caster system which
Maximum weight capacity is 3 adapter features an extra wide (146g). converts dolly into a stationary
lbs. (1.4 kg). 2˝ (5cm) high and mounting platform. The Item #VEQRA667.............49.95 platform. Collapses small for
weighs 5 oz (141g). camera pad is reversible. It has storage. Collapsed dimensions
Item #VEPH243 ...............21.95 a flanged edge to prevent Quick-Release
Adapter Plate (QB-667) are 6 x 6 x 24˝ (15x15x61cm)
camera slippage when shooting HWL. Maximum capacity is 11
vertically and is reversible Additional, for QRA-667.
lbs. (5kg) Weighs 1.5 lbs.
when not needed. It features a Item #VEQB667 ...............29.95
(680g).
“Camera Safe” slide mounting Item #VEDL10..................47.95
DL-7 Dolly
quick-release platform with
“Auto Lock” retaining system. All metal construction dolly
Tripod Weight-Bag
with rubber wheel casters and
Its dimensions are 4.1 x 2.2˝ This functional apron fits
457
carry strap. Ideally suited for
(10 x 5.6cm) and weighs just most heavy-duty tripods. Folds beneath any Velbon tripod and
4.3 oz. (122g). compactly for storage. Folded can be filled with rocks or
Item #VEQRA635.............39.95 dimensions are 7 x 7 x 26˝ weights to provide additional
(17.8x17.8x66cm) HWL. Its support for tripod stability.
Magnesium Ball Quick-Release maximum capacity is 15 lbs. Comes with the Carmagne 630
Head Medium (PH-253) Adapter Plate (QB-635) (6.8kg) and it weighs 8.5 lbs. and 640 tripods.
Additional, for QRA-635. (3.9kg). Item # .............................T.B.A.
Magnesium Ball Item #VEQB635 ...............22.95 Item #VEDL7..................149.95
Head Medium (PH-253) Quick Leveler
Made of die-cast magnesium Installs between panhead and
for light weight and strength. leg. Tilts 15° from level in any
Single lever operation with Macro direction for precise position-
panning. 3.2˝ (8.1cm) high and Slider ing. Dimensions: 2x2˝ (5x5cm).
weighs 6oz (170g). Item #VEQL......................27.95
Item #VEPH253 ...............54.95
Macro Slider
Medium Ball Magnesium Alloy Macro stage for precise 4-way
Socket Head (PH-163) Quick Release Adapter (QRA-667) camera alignment. Maximum
Medium size ball head with weight capacity is 8 lbs. (3.6kg).
single lever operation. Dimensions are 2.5 x 4.6 x 7.6˝
Maximum capacity is 11 lbs. QUICK RELEASE PLATES (6.4x11.7x19.3cm) HWL and
(5kg). 4˝ tall and weighs 20.7oz weighs 24 oz. (680g).
(587g). MODEL # FITS ITEM # PRICE Item # VEMSQ .................89.95
Item #VEPH163 ...............69.95 QB-4l PH-148, PH-248, UP-4DX, UP-4DX II VEQB4L 5.95
Super Arm-7
QB-4LC PH-446 (DF-10ML, DF-40, CX-440) VEQB4LC 7.95
Ball Head (PH-163Q) Geared horizontal arm. 4.5 x
With quick release. QB-4W PH-249Q, (DF-50, CX-544) PH-359Q VEQB4W 5.95 13.75˝ (11.4 x 35cm) H.L. for
Item #VEPH163Q ..........106.50 PH-258, PH-252Q, QRA-5, close-up or copy work. By
QB-5L VEQB-5L 8.50 adding a ball or panheads, two
PH-156Q (VICTORY 450 and 550), PH-556Q
Large Ball Head Socket (PH-173) cameras may be mounted on the
Pro sized ball head for use with PH-656Q, (CX-540, CX-640) assembly. Weighs 3 lbs. (1.4kg).
QB-5LC VEQB5LC 7.95
all 35mm and medium format PH-458 (CX-580) PH-468 (CX-680) Item # VESA7 .................319.95
cameras. Maximum weight QB-5W PH-159Q, (DF-60, CX-684) VEQB5W 8.50
capacity is 15 lbs. (6.8kg). Super Plate (SP)
QB-5RL PH-358 VEQB5RL 8.50 Two-camera mounting plate
Weighs 1.6 lbs. (725g) and is
5˝ (12.7cm) tall. QB-6 PH-268R VEQB6 11.95 with all metal construction-
Item #VEPH173 ...............79.50 which attaches to panhead.
QB-6RL PH-368 (CX-687) VEQB6RL 8.95
Maximum weight capacity is
Large Ball QB-157 PH-157Q VEQB157 13.95 10 lbs. Dimensions are 1 x 2 x
Head Socket (PH-173Q) QB-635 QRA-635, PH-163Q VEQB635 22.95 8˝ (2.5 x 5 x 20cm) HWL and
With quick release. weighs 14 oz. (396g).
Item #VEPH173Q ..........121.95 QB-667 QRA-667, PH-173Q VEQB667 29.95 Item # VESP......................56.50
Kadette Tripod (1105) Tilt Sentry Tripod (1107) Brom Master Panhead (1113)
A medium-duty tripod, Same as Sentry tripod, with a A heavy-duty panhead, suitable for sup-
suitable for cameras up to ball tilt center post. port work up through 8x10 format. The
4x5. A favorite of outdoor Item # BRTTS...............222.50 3x5x.5˝ (7.6x12.7x1.3cm) platform fea-
photographers. tures interchangeable 1⁄4˝ and 3⁄8˝ camera
Item # BRTKQ .............186.50 Sentry Hi Rise Tripod (1102) locking screws. The 3⁄8˝ socket in the base of
Same as Sentry tripod, with the panhead makes it suitable for most tripod legsets throughout the
Tilt Kadette Tripod (1104) longer legs and center post. world. It has rugged controls for each of the three conventional
Same as above, with a ball tilt Item # BRTSHR ...........189.95 movements. Height is 4.5˝ (11.4cm), weight 3 lbs. (1.4kg).
center post. Item # BRPHM .........................................................................174.95
Item # BRTTK ..............233.95 Tilt Sentry Hi Rise Tripod (1103)
Same as Tilt Sentry tripod, with Miscellaneous Accessories
Kadette Hi Rise Tripod (1108) longer legs and center post.
Same as Kadette tripod, with Item # BRTTSHR.........236.50 Majestic Adapter (1112) Adapter Bushing (1631)
longer legs and center post. Fits Majestic 13⁄4˝ head to 3⁄8˝ Stainless steel bushing adapts
Item # BRTKHR...........198.95 Master Tripod (1101) stud. Weighs 7 oz. (198g). 3
⁄8˝ head to 1⁄4˝ stud.
Heavy-duty wood tripod with Item # BRAM38 ...............48.95 Item # BRB.2538SS ............8.95
Sentry Tripod (1106) rack and pinion center post in a
A medium-duty tripod, suit- surveilling ball in socket mount. Adapter Platform (1114)
able for cameras up to 8x10˝. Holds cameras up to 16x20˝. 2.75˝ diameter plate adapts 3⁄8˝ head to 1⁄4˝ stud. Weighs 5 oz. (142g).
Item # BRTS .................177.50 Item # BRTM................285.95 Item # BRB38.25Q .......................................................................27.95
CAMERA SUPPORTS
Arca Swiss Monoballs have been at the forefront of quality
and performance. Today, Arca Swiss continues its tradition
of innovation and leadership by introducing major tech-
nological breakthroughs in Monoball design.
The axial clamping mechanism provides higher load
capacity and prevents even the slightest migration when
the camera is locked into position. A separate control is set
to apply a constant minimum friction. Arca Monoball B1 with and
without a quick release
The progressive cushioning feature counteracts the
effect of weight transfer when the camera is tilted. It is especially useful with heavy cameras. In actuali-
459
ty, there are two types of ballheads available. a) The B1 Series design, which is a single axis rotation with
one locking knob; b) the B2 design, which is built on the double axis rotation, allowing movement around
two distinct axes due to two separate balls encapsulated into one another and two individual locking
knobs. The B1 Series single action ballhead is sold various ways. The “b” economic model, without pan-
ning capabilities, the B1 Standard with panning capabilities and the “G” (gross) large model, all sold
with different camera mounting devices. All Arca ballheads mount onto 3⁄8˝ tripod screw.
Monoballs
Monoball B1e with 1⁄4˝ Camera Monoball B1e Monoball B1 with 1⁄4˝ Camera Monoball B1g with 3⁄8˝ Camera
Mounting Screw (8010131) with Quick Set Device Mounting Screw (8010132) Mounting Screw (8010113)
Basic B1 single axis ballhead. (8010011) A heavy-duty B1 standard Same as above, with 3⁄8˝ camera
Economic model, without pan- A basic B1 single axis ballhead. single axis ballhead, with mounting screw.
ning capabilities. This is an economical model, panning capabilities. 1⁄4˝ camera Item # ARB1G38 ............496.95
Item # ARB1E.25............302.95 without any panning capabili- mounting screw.
ties. Complete with quick Item # ARB114...............378.95 Monoball B1g with
Monoball B1e with 3⁄8˝ Camera release feature for mounting Quick Set Device (8010014)
Mounting Screw (8010111) and unmounting cameras in a Monoball B1 with 3⁄8˝ Camera An enlarged B1 single axis ball-
Same as above, with 3⁄8˝ camera hurry. (Requires camera Mounting Screw (8010112) head with panning capabilities.
mounting screw. mounting plate). Complete with quick release
A heavy-duty B1 standard
Item # ARB1E38.............302.95 Item # ARB1EQR ...........289.95 feature for mounting and
single axis ballhead, with
unmounting cameras in a
panning capabilities. 3⁄8˝ camera
ARCA-SWISS MONOBALL SPECIFICATIONS hurry. (Requires camera
mounting screw.
mounting plate.)
Model Load Capacity Height Weight Item # ARB138...............378.95
Item # ARB1GQR ..........479.95
Monoball B1e 90 lbs. (40kg) 4.3˝ (10.9cm) 1.4 lbs. (650g)
Monoball B1 with Monoball B2 with
Monoball B1e (QS) 90 lbs. (40kg) 4.5˝ (11.4cm) 1.7 lbs. (748g) Quick Set Device (8010012) Quick Set Device (8010013)
Monoball B1 90 lbs. (40kg) 4.3˝ (10.9cm) 1.4 lbs. (650g) A B1 standard single axis A B2 double axis ballhead with
ballhead, with panning two tightening knobs, panning
Monoball B1 (QS) 90 lbs. (40kg) 4.5˝ (11.4cm) 1.7 lbs. (748g)
capabilities. The quick release capabilities and quick release
Monoball B1g 200 lbs. (90kg) 5.8˝ (14.7cm) 3.3 lbs. (1496g) feature allows for mounting feature for mounting and
Monoball B1g (QS) 200 lbs. (90kg) 6˝ (15.2cm) 3.5 lbs. (1588g) and unmounting cameras in unmounting cameras in a
a hurry. (Requires camera hurry. (Requires camera
Monoball B2 150 lbs. (68kg) 5˝ (13cm) 3.4 lbs. (1500g)
mounting plate.) mounting plate.)
Subject to change without notice Item # ARB2QR .............649.95
Item # ARB1QR .............379.95
Arca Swiss quick release adapters are designed for tripods and Universal Canon Camera Plate (802030)
heads that come without a quick release feature. These adapters Camera Plate (8020101) Camera plate for long Canon
will allow the photographer to mount and unmount cameras in a With 1⁄4˝ camera mounting screw. lenses, 55mm or longer. Two
Item # ARQRP.25 ............44.95 1
⁄4˝ size screws, 39mm apart.
hurry. These release adpters fit all tripods and heads. They are
Item # ARQRPC...............53.95
available in both 3/8˝ and 1/4˝ screws. Universal Camera Plate (802010)
With 3⁄8˝ camera mounting screw. Nikon Camera Plate (802031)
84mm Quick Release 60mm Quick Release Item # ARQRP38 .............44.95 Camera plate for long Nikon
Adapter 3⁄8˝ (802000) Adapter 3⁄8˝ (802002) lenses, 84mm or longer. Two
Fits onto tripods with 3⁄8˝ Fits onto tripods with 3⁄8˝ Universal 1
⁄4˝ size screws at a variable dis-
screw. 3.3˝ long (8.4cm) screw. 2.7˝ long (6cm) Camera Plate Small (802009) tance of 32-38mm.
and weighs 6.4 oz. (181g). and weighs 4.8 oz. (136g). With 1⁄4˝ camera mounting screw. Item # ARQRPN ..............53.95
(Requires camera mounting (Requires camera mounting Item # ARQRP.25S ..........44.95
plate.) plate.) Leica Camera Plate (802026)
Item # ARQRP3884 .......116.95 Item # ARQRP3860 .......112.95 Hasselblad With 1⁄4˝ camera mounting
Camera Plate (802011) screw.
460
84mm Quick Release 60mm Quick Release With 1⁄4˝ camera mounting Item # ARQRPL.25 ..........48.95
Adapter 1⁄4˝ (802001) Adapter 1⁄4˝ (802003) screw.
Fits onto tripods with 1⁄4˝ Fits onto tripods with 1⁄4˝ Item # ARQRPH.25 .........44.95 Leica Camera Plate (8020261)
screw. 3.3˝ long (8.4cm) screw. 2.7˝ long (6cm) With 3⁄8˝ camera mounting
and weighs 6.4 oz. (181g). and weighs 4.8 oz. (136g). Hasselblad screw.
(Requires camera mounting (Requires camera mounting Camera Plate (802021) Item # ARQRPL38 ...........48.95
plate.) plate.) With 3⁄8˝ camera mounting
Item # ARQRP1484 .......116.95 Item # ARQRP1460 .......112.95 screw. Medium Format
Item # ARQRPH38 ..........44.95 Camera Plate (802032)
Camera plate for medium for-
Rollei Camera Plate (802022) mat cameras, 55mm or longer.
Base Plate Two 1⁄4˝ size screws, 12mm and
Item # ARQRPR...............44.95
27.5mm from one end of the
A 7.9˝ (20cm) diameter plate that attaches to the bottom of any
Mamiya RB67 camera plate.
ballhead, pan head or camera, allowing head or camera to be used Camera Plate (802024) Item # ARQRP3 ...............53.95
from a very low level or table top. Item # ARQRPMRB.........44.95
Long 150mm
3
1
⁄4˝ Ground Plate (810002) ⁄8˝ Ground Plate (810001) Small Camera Plate (802025) Camera Plate (802050)
With 1⁄4˝ mounting screw. With 3⁄8˝ mounting screw. 24 x 36mm. Two 1⁄4˝ size screws. Adjustable.
Item # ARGP.25 .............187.95 Item # ARGP38 ..............187.95 Item # ARQRP35 .............44.95 Item # ARQRP150 ...........73.95
B I L O R A B A L L H E A D S
CAMERA SUPPORTS
on the market today. Large locking levers make the heads very easy to handle.
They lock down firmly with just a twist.
User-adjustable tension allows fine-tuning the performance of the ball to
suit the shooting situation, as well as to compensate for wear over the life of
the ball, which sits in a Teflon collar for smooth rotation.
Superballs
461
capabilities. Maximum load (33-0500) plate that allows changing
capacity 12 lbs. (5.4kg) with a cameras quickly and easily.
base diameter of 2.5˝ (6.4cm). Head includes a removable
Height is 3.9˝ (9.9cm) and safety stopper. Specs are
weight 20 oz. (550g). approximately the same as for
Item # FOSBM .............239.00 the Mini Superball. (Requires
camera mounting plate.)
Superball (33-0500) Item # FOSBMQR........295.00
With standard head, 1⁄4˝ and 3⁄8˝
camera mounting screws. A Superball with Quick Release
➧
Superball Accessories
Universal Plate for Mini Superball (33-0517) Quick Release Panoramic Base for Mini
A 2˝ (51mm) diameter plate with reversible 1⁄4˝ and 3⁄8˝ screws. With for Superball (33-0513) Superball (33-0519)
this plate, the Mini Superball, with Quick Release (33-0404), can be Same as above, but larger. Provides 360° calibrated pan-
converted to a Standard Mini Superball (33-0400). (Replacement With this adapter, the ning at base of Mini Superball.
for Mini Superball.) Superball (33-0500) can be Item # FOPB...................138.95
Item # FOUPMSB ........................................................................54.00 converted to Superball with
Quick Release (33-0505). Base Plate (33-0507)
Universal Plate for Superball (33-0511) Requires camera mounting With 3⁄8˝ size screw. A 9˝
A 3˝ (76mm) diameter plate with reversible 1⁄4˝ and 3⁄8˝ screws. With plate, sold separately. (23cm) diameter hexagon plate
this plate the Superball, with Quick Release (33-0505), can be convert- (Replacement for Superball that attaches to the bottom of
ed to a Standard Superball (33-0500). (Replacement for Superball.) with Quick Release.) any ballhead, pan head or cam-
Item # FOUPSB ............................................................................54.00 Item # FOQRHSB ..........122.95 era, allowing the head or cam-
era to be used from a very low
Quick Release for Mini Superball (33-0518) Panorama Adapter (33-0514) level or tabletop.
A quick release adapter that allows changing of cameras quickly For use on either Mini Item # FOBP...................116.95
and easily. With this adapter, the Mini Superball (33-0400) can be Superball. Allows rotation of
converted to a Mini Superball with Quick Release (33-0404). the camera (top) plate at any Base
Requires camera mounting plate, sold separately. (Replacement for angle, in addition to the base Plate
Mini Superball with quick release.) rotation. (33-0507)
Item # FOQRHMSB .....................................................................93.95 Item # FOPA ..................219.95
B R O M , S C H O O N , S A C H T L E R
462
CAMERA SUPPORTS
Small Professional Medium Professional
Small
Professional
Ball Head (20-6017) Ball Head (20-6011)
Ball Head With 1⁄4˝ size camera screw, 3⁄8˝ With reversible 1⁄4˝ and 3⁄8˝ camera Large
(20-6017) tripod screw with 1⁄4˝ adapter. screw, 3⁄8˝ tripod screw with 1⁄4˝ Professional
A medium weight version pro- adapter. A heavy weight profes- Ball
fessional ball head, sitting on a sional ball head, with the same Head
fluid system panoramic base, panoramic base as above, with a with
with a separate locking knob large locking knob for ball, plus Quick
for ball and pan. Maximum Release
an adjustable friction brake for (20-6014)
load capacity is 10 lbs. (4.5kg), fine setting and a separate pan-
head or base diameter 1.8˝ ning locking knob. Maximum
(45mm), height 3.6˝ 93mm) Large Professional Ball Head
Small Ball Head (20-6013) load capacity is 18 lbs. (8.1kg),
and weight 10.5 oz. (296g). with Quick Release (20-6014)
With single locking knob for head or base diameter 2.2˝
Item # KABHPS...............69.95 With 3.5x2.8˝ (88x72mm)
ball and pan, 1⁄4˝ size camera (56mm), height 4.6˝ (116mm)
quick release camera plate, 1⁄4˝
screw, 3⁄8˝ tripod socket with 1⁄4˝ and weight 22.7 oz. (644g).
and 3⁄8˝ size screws and 3⁄8˝ tri-
463
adapter. Base diameter is 0.9˝ Item # KABHPM ...........199.95 pod screw with 1⁄4˝ adapter.
(24mm), height 2˝ (50mm) Medium Same large ball head, with a
and weight 1.8 oz. (50g). Professional Large Professional
built on Pro Quick Release head
Item # KABHS .................29.95 Ball Head Ball Head (20-6012)
for mounting and unmounting
(20-6011) With reversible 1⁄4˝ and 3⁄8˝ size cameras quickly. The quick
Medium Ball Head (20-6018) camera screw, 3⁄8˝ tripod screw release has two bubble levers
With single locking knob for with 1⁄4˝ adapter. Same as above, built in on its side for both axis,
ball and pan, 1⁄4˝ size camera but heavier, with a maximum plus an optional anti-theft fea-
screw, 3⁄8˝ tripod socket with 1⁄4˝ load capacity of 22 lbs. (10kg). ture. (An optional lock and key
adapter. Base diameter is 1.2˝ Head of base diameter is 3˝ is available.) Base diameter is 3˝
(30mm), height 2.6˝ (67mm) (76mm), height 5.5˝ (14cm) and (76mm), height 5.9˝ (15cm)
and weight 3.9 oz. (110g). weight 45 oz. (1236g). and weight 52 oz. (1464g).
Item # KABHM................33.50 Item # KABHPL.............239.95 Item # KABHPLQR .......319.95
Kaiser has two types of quick release adapters. Both have a spring-loaded, quick-action lever on the base plate which allows easy insertion
of the camera plate. In the small quick release, this lever is held open manually; in the professional model it remains cocked in the open posi-
tion and locks when pressure from the camera plate is placed on the base plate.
Small Quick Release (20-6021) Small Quick Release Camera Plate (20-6022) Pro Quick Release
With 1.6 x 1.6˝ (41 x 41mm) With 1⁄4˝ screw. Dimensions 1.6 x 1.6˝ (41 x 41mm). Replacement Camera Plate (20-6026)
camera plate, and 1⁄4˝ size for 20-6021 and 20-6023. With 1⁄4˝ and 3⁄8˝ size screws.
screw. The small quick mount Item # KAQRPS ............................................................................19.95 Dimensions 3.5 x 2.8˝ (88 x
fits onto 1⁄4˝ tripod screw. 72mm). Replacement for above
Measures 2.4 x 1.9 x .9˝ Pro Quick Release (20-6025) models 20-6025 and 20-6014.
Pro Quick Item # KAQRPP...............44.95
(62 x 48 x 22mm) L.W.H. Release
With 3.5x2.8˝ (88x72mm)
Item # KAQRS..................27.50 Camera quick release camera plate,
Plate
1
⁄4˝ and 3⁄8˝ size camera Lever Locking Pin System (20-6027)
Small Quick Release (20-6023) (20-6026) screws, and 1⁄4˝ and 3⁄8˝ tripod A lock and key to lock camera
Same as above, with a thicker screws. Has two bubble plate 20-6026 to Pro Quick
base to accept an optional flash levers for both axes built on Release or large ball head with
lighting unit bracket. 3.3 x 2.4 its side. Also has an anti- quick release.
x 1˝ (85 x 60 x 25mm) L.W.H. theft feature. (An optional Item # KALLPSQR...........27.50
Item # KAQRL .................36.95 lock and key can be pur-
Lever Locking Pin
chased to lock your valuable
System (20-6027)
Flash/Lighting camera to your tripod.)
Pro
Unit Bracket (20-6024) Quick Measures 3.5 x 2.8 x 1.3˝ (90
With shoe for mounting flash Release x 72 x 32mm) L.W.H. and
or misc. lighting equipment. (20-6025) weighs 11.4 oz. (322g).
Item # KABSQR ...............19.95 Item # KAQRP ...........124.95
non-slip hold. Full movement allows virtually any camera position, including verticals. A single knob
locks tilt and panning movements.
Shoe Mount Standard Ballhead (320-020) Entirely new line of ballheads Ballhead FL-2 (321-232)
Flash Ballhead (320-060) With 1⁄4˝ camera screw, 3⁄8˝ tri- from the same German crafts- Same as PL-1, without pan
With shoe mount and 1⁄4˝ pod screw and 1⁄4˝ adapter. men who make our Classic line. control, but with adjustable
screw, accessory shoe mount Slightly larger than compact Onyx series heads feature multi- friction control. Camera plat-
ball and socket, head, 360° model above. Head or base ple control options, contempo- form and base diameter is the
rotation for accurate aim of diameter is approximately 1.5˝ rary cylindrical shape and deep, same as PL-1, height is 4.3˝
flash units or slaves. Mounts in (38mm), height is 2.8˝ (72mm) durable all-black finish. Large (10.8cm) and weight 11.2 oz.
camera hot shoe or on tripod and weight 5.8 oz. (162g). camera platforms have slip-resis- (318g).
and accepts all shoe-type flash Item # STBHS...................29.50 tant, knurled surface. Each head Item # STBHOFL2 ...........82.95
units or shoe-mounted acces- has reversible camera stud and
sories. Height 2˝, weight 1 oz. Deluxe Studio Ballhead (320- tripod socket (1⁄4˝-20 or 3⁄8˝). Ballhead Pro-3 (321-238)
Item # STBHSM ...............19.95 030) A deluxe heavy-duty ballhead
With 1/4˝ camera screw, 3/8˝ Ballhead PL-1 (321-132) with lock, friction and pan
Compact Ballhead (320-010) tripod screw and 1/4˝ adapter. Heavy-duty ball head with controls. All controls and pan
With 1⁄4˝ camera and tripod Larger than standard ballhead. large knobs for pan and tilt calibrations are beautifully
screw. Used with compact Head diameter is the same as control. Camera platform laser engraved in high visibility
cameras. Head or base diame- standard ballhead. Base diame- diameter is 1.5˝ (38mm), base white. Camera platform is 2˝
ter is approximately 1.2˝ ter is 1.7˝ (45mm), height is diameter 1.9˝ (5cm), height (5cm), base diameter 2.4˝
(30mm), height is 2.5˝ (6cm) 3.8˝ (95mm), weight 10.8 oz. 3.8˝ (9.5cm) and weight 10.9 (6cm) and weight 18.4 oz.
and weight 2.8 oz. (80g). (308g). oz. (309g). (522g).
Item # STBHC ..................16.95 Item # STBHD..................44.95 Item # STBHOPL1 ...........59.95 Item # STBHOP3 ...........154.95
CAMERA SUPPORTS
Graf-Studioball ensures absolute and rock-steady support, even for heavy
cameras or tele-lenses. The ball diameter of 68mm allows smooth and pin-
point positioning in any selected position. In addition, Graf-Studioball is
equipped with a dual friction knob and has Independent lockable 360°
Studioball
with Quick
panorama-base (2 x 180° scale with 5° divisions). Graf-Studioball is
Release
(SBQR)
available in two models.
Studioball with Round Camera Plate (SB-14) Studioball with Quick Release (SBQR)
With reversible 1⁄4˝ and 3⁄8˝ camera and tripod screw. Designed with Same features as above, with a built-in professional quick release
a 2˝ (50mm) camera plate, Polaroid camera backs can be used head, which has a special feature of an added safety lock when used
465
without any obstruction. Maximum load capacity is 40 lbs. with Studioball camera plates. Will lock plate even if locking knob
(18.2kg), base diameter is 3.5˝ (88cm), height approximately 6˝ is loose. Base diameter is 3.5˝ (88cm), height approximately 6˝
(15cm) and weight 3 lbs. (1.4kg). (15cm) and weight 3.7 lbs. (1.7kg). (Requires mounting plate.)
Item # STSB.25 ..........................................................................299.00 Item # STSBQR..........................................................................319.95
A mini version of the full-size Made of heavy-duty nylon, these plates have grooves on their base for
Studioball without panning capa- safety lock, (except Jumbo). They measure 3.2 x 2.4˝ (80 x 60mm),
bilities. These Mini Studioballs will and are compatible with Arca-Swiss and Foba camera plates.
support 35mm and medium for-
mat cameras up to 13 lbs. (5.9kg). Camera Mounting Plate Jumbo Base Plate (CPJP)
A 11⁄2˝ (42mm) head assures with 1⁄4˝ Screw (CP14) Offers unique new applica-
smooth and pin-point positioning Item # STQRP.25 .............39.95 tions. At 20˝ (500mm), it is
of your camera. The dual function the only Jumbo Plate for direct
friction knob allows for minute Camera Mounting Plate use on quick release plates.
adjustments of the camera prior to with 3⁄8˝ Screw (CP38) Free sliding adjustment over
Item # STQRP38 ..............39.95 entire length if used with quick
shooting as well as assuring that the
release plates. Includes addi-
camera will not fall over if the main tional 1⁄4˝ and 3⁄8˝ threads for
locking knob comes undone. These Camera Mounting Plate direct mounting on tripods.
Mini Studioballs are ideal for back- Mini Studioball with for Hasselblad and Rollei Two reversible, 1⁄4˝ and 3⁄8˝,
packers or anyone concerned with Quick Release (MIQR) shown with 1⁄4˝ Screw (CPH)
with optional mounting plate round camera plates to tighten
weight or size. Item # STQRPH ...............39.95 camera and lens or view cam-
era with two tripod sockets.
Mini Studioball with Round Camera Plate (M14) Camera Mounting Plate for Item # STBPJ..................194.50
With reversible 1⁄4˝ and 3⁄8˝ camera and tripod screw. Due to its nar- Mamiya with 1⁄4˝ Screw (CPM)
row 11⁄2˝ (42mm) camera plate, Polaroid backs for 35mm and 21⁄4˝ Item # STQRPM ..............39.95 TL-130 Bracket for Jumbo
cameras can be used without any problem. Maximum load capacity Plate (TL-130)
is 13 lbs. (5.9kg), base diameter is 21⁄2˝ (64mm), and its height is Quick Release Assembly (QR) 130mm round bracket. Fits up
A quick release adapter that to 130mm diameter lenses.
approximately 41⁄2˝ (115mm). It weighs 19.75 oz. (560g). Three tightening screws
Item # STMB.25..........................................................................199.95 allows changing of the cameras
included for centering telepho-
quickly and easily. With this
to lenses.
Mini Studioball with Quick Release (MIQR) adapter, the Studioball or Mini
Item # STBTL130JBP ....115.95
Same as the Mini Studioball with Round Camera Plate (M14), but Studioball with Round Camera
with a built-in professional quick release head. It accepts all Plate can be converted to a TL-180 Bracket for Jumbo
Studioball Camera Plates. Maximum load capacity is 13 lbs. Studioball or Mini Studioball Plate (TL-180)
(5.9kg), base diameter is 21⁄2˝ (64mm), and its height is approxi- with a quick release. (Requires Same as above, for lenses up to
mately 41⁄2˝ (115mm). It weighs 19.75 oz. (560g). Camera Mounting Plate.) 180mm diameter.
Item # STMBQR.........................................................................229.95 Item # STQRSB14............69.95 Item # STBTL180JBP ....133.95
and does it with much greater security. It will tilt past 90° in any direction and has 360° panning capa-
bility. Two jumbo locking knobs give the photographer complete control over all camera movements. One
knob locks all tilts, and the other locks the panning. Both controls are easy to locate and use. The 360°
rotation control cannot be mistaken for the tilt control, even in total darkness. Rotation is graduated in
15° increments to provide convenient reference angles. Proheads can accommodate 35mm, medium for-
mat, 4x5 and 8x10 view cameras both safely and securely. The main locking knob includes a tensioning
adjustment, so the amount of drag on camera movements can be adjusted for different weights.
Tightening the locks does not cause the head to change location, even slightly.
Pro Heads
466
Prohead
With 1⁄4˝ size camera screw, 3⁄8˝ tripod screw and 1⁄4˝ adapter. A
Delrin constructed professional head, of anodized aluminum and
stainless steel. Head or base diameter is 3˝ (75mm), height 6.8˝
(172mm) and weight 2.5 lbs. (1.1kg).
Item # NPPH ...............................................................................229.95
CAMERA SUPPORTS
Universal Micro Focus Adapter Novoflex Universal Panorama
A precision focusing tool with two separate stages. Combining the Plate (PANORAMA)
stages in one direction will double the travel of the camera. The Turn your camera round 360°
stages are independent of each other and can be used either sepa- play-free! Large number mark-
rately or mounted on top of one another (also at right angles) for ings and a spirit-level for an
camera movement along the x and y axis. The maximum travel on optimum horizontal align-
each stage is 3.5˝ (90mm). Scales in millimeters provide easy refer- ment. Ideal in combination
ence. Handy positioning and locking screws. 1/4˝ camera and tri- with any ball and socket head.
pod thread. A rack and pinion drive ensures accurate setting. 3.5 x 2.4 x 7˝ (9 x 6 x 1.8cm)
Length of stages 5.9˝ (150mm). Its weight is 22.4 oz. (634g). Universal Micro Focus Adapter LWH. Weighs 5.9 oz. (168g).
Item # GBMFA............................................................................139.95 Item # NOUPP.................39.95
467
socket heads, with patented Supports compact 35mm cameras, portable flashes,
construction, offer wide areas compact camcorders, or any lightweight accessory
of applications. At the same with a 1/4 x 20 mounting capability. Clamps onto
time, the weight of both Magic virtually anything and goes just about anywhere.
Balls have been significantly Less than 12˝ in length and weighs only only 9.6
oz. A flexible steel neck can be angled into a
reduced compared to similar
variety of positions for maximum support, as
products. Their friction con- well as a separate mounting platform with a
Magic Ball trol allows them to be used locking ball joint swivel head. Heavy duty spring
(MB) safely and comfortably with clamp features offset rubberized jaws.
heavier products. Item # SLCP ..................................................................................19.95
Magic Ball (MB) Mini Magic Ball (MBMINI) Hi Sierra Clampette (618-785)
Accepts load capacity up to 22 Accepts load capacity up to 11 A versatile, strong, convenient, compact compan-
lbs. (10kg). Dimensions are 6.3 lbs. (5kg). Dimensions are 4.3 ion for small and large cameras. It mounts to
x 2.4 x 4.1˝ (15.9 x 6 x 10.5cm) x 1.6 x 3˝ (11 x 4 x 7.5cm) books, chairs, etc. Made of die-cast aluminum
LWH. It weighs 2 lbs. (925g). LWH. It weighs 12 oz. (330g). alloy, it is strong, yet lightweight. Weighs just 2 oz.
Item # NOMB ................299.95 Item # NOMMB.............249.95 Item # HIC ..........................................................9.95
D AV I S & S A N F O R D by T I F F E N
Magnum Tripod (MAGNUMXL)
DAVIS & SANFORD SPECIFICATIONS
Professional photo/video tripod with 3-way fluid head and
quick release. Made in the USA, this Davis & Sanford tripod is Load Capacity 15 lbs. (6.8kg)
made from the finest and strongest metal aluminum alloy Minimum Usable Height 0˝ (0cm)
with a superior protective black finish. The excellent
strength-to-weight ratio and combined benefit of rugged dura- Maximum Extension 69.25˝
bility, will give the user many years of trouble free use. Perfect for (176cm)
35mm, medium format, and camcorders, this tripod features a Leg Sections 2
foam cushioned 11⁄4˝ (30mm) insulated legs, with rugged twist-
type leg locks, and spiked feet, a reversable lift-type centerpost, Center Column Sections 1
for low-angle work, a 3-way 360° pan fluid head, a quick- Folded Length 32˝ (81.3cm)
release plate for quick action, a built-in bubble level, and a 5-
year warranty. Its lowest operating angle is 30˝ (76cm). But, Weight 5.25 lbs.
by reversing the center post, you can get as low as 0˝. (2.4kg)
Item # TIMXL ...........................................................119.95 Subject to change without notice