Professional Documents
Culture Documents
Dcem2100 PDF
Dcem2100 PDF
The D-CEM2100 Opacity Monitor is a dual-pass auto zero and span check
transmissometer configured for the measurement of
opacity and dust concentration within the flue gas. dynamic mis-alignment check
Its unique optical arrangement provides continuous
measurements of transmissivity of visible light across normalised reporting
the flue in opposite directions, providing not only an
accurate average of the dust loading within the duct, remote data display
but a dynamic assessment of any mis-alignment errors
that may occur due to duct movement. data in % opacity, mg/m3, mg/Nm3 dust
Doc i/d : 060034 Issue : A Rev. : Date : 25/10/06 © 2006 CODEL International Ltd. We reserve the right to modify designs without prior notice.
Overall Unit Dimensions
SPU/PSU
(wt. 4kg)
Transceiver
(wt. 14kg)
DDU Site Flange
(wt. 3kg)
Specification
Calibration - auto zero & auto span US EPA Construction - epoxy-coated aluminium to IP67
compliant
Ambient - -20oC to +70oC
Compliances Temperature
Low Voltage - 73/23/EEC directive compliant Air Purge - compressed air, 1 litre/sec @ 1bar
Distributor :
CODEL International Ltd.
Station Building, Station Road IMATEC IMPEX SRL
Bakewell, Derbyshire DE45 1GE Aleea Tineretului Nr. 684, Banesti, Jud Prahova
England Bucharest office:
Sos Pantelimon 253, bl 44, Sc A, Et 4, Ap 16, sector 2
Tel: +44 (0) 1629 814 351 021612 Bucuresti, Romania
Fax: +44 (0) 8700 566 307 Tel : +40 21 6 27 25 89; +40 724 090 583;
e-mail: codel@codel.co.uk Fax :+40 31 4 09 07 97
web site: www.codel.co.uk E-mail: office@imatec.ro Web: http://www.imatec.ro