Professional Documents
Culture Documents
GLASS RAILING
CABLE RAILING
ALUMINUM RAILINGS
.0
59
Type 304 or Type 316.
"
Mill, Satin or Bright Polished Finish.
These Stainless Steel sections have no visible seam
and are suitable for bending.
c
GR3192
b
a
Type 304 Stainless Steel
INTERNAL HORIZONTAL MITER VERTICAL MITER RADIUS RADIUS POST
a b c Finish TOP RAIL END CAP SPLICE CORNER CORNER ELBOW ELBOW
1.66" 3
/4" 1" Mill GR3166 GR3166S*
1.66" 3
/4" 1" Satin GR3166.4 GR3169E.4 GR3166S* GR3166MK.4 GR3166MKV.4 GR3166RC GR3166PT
1.66" 3
/4" 1" Long. Satin GR3166.4L GR3169E.4 GR3166S*
1.66" 3
/4" 1" Polished GR3166.7 GR3169E.7 GR3166S* GR3166MK.7 GR3166MKV.7
1.90" 3
/4" 11/4" Mill GR3190 GR3190S*
1.90" 3
/4" 11/4" Satin GR3190.4 GR3193E.4 GR3190S* GR3190MK.4 GR3190MKV.4 GR3190RC GR3190PT
1.90" 3
/4" 11/4" Long. Satin GR3190.4L GR3193E.4 GR3190S*
1.90" 3
/4" 11/4" Polished GR3190.7 GR3193E.7 GR3190S* GR3190MK.7 GR3190MKV.7
2.50" 3
/4" 11/4" Mill GR3250 GR325CS*
Finish TOP RAIL END CAP INTERNAL SPLICE HORIZONTAL MITER CORNER VERTICAL MITER CORNER
Mill GR3315 GR3315S
Satin, Longitudinal GR3315.4L GR3315E.4 GR3315S GR3315MK.4L GR3315MKV.4L
Polished GR3315.7 GR3315E.7 GR3315S GR3315MK.7 GR3315MKV.7
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
102 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
GR9398 insert
Glass Railing Top Rail Sections
11 /2"
Many local codes require that the Top Railing meet a Cap Screw or Wedg
STANDARD PRODUCTS
specific load requirement. Confirm with your local authorities Setting Block 12" on center
prior to specifying the use of this Top Railing style – refer to b
page 238. or GlassWedge
SATIN POLISHED
a b Glass Alloy STAINLESS STAINLESS
3
/4" 7
/8" 1
/2" 304 GR30915.4 GR30915.7 GR30915
1" 11/8" 3
/4" 304 GR31115.4 GR31115.7
3
/4" 7
/8" 1
/2" 316 GR30916.4 GR30916.7
RAILING SYSTEMS
Top Rail
Placing metal Top Rail in direct contact with a glass edge is not
recommended. Use Silicone or Protective Insert – page 104 –
as a buffer between the Top Rail selected and Tempered Glass. Select
Protective Insert based on glass thickness and depth of channel on
Slotted Top Rail.
Insert
TRADITIONAL RAILING
.10
9"
Extruded Aluminum Top Rail
20' Lengths.
1"
Aluminum Alloy 6063-T52, .900 lb/ft.
GR2168 3
/4"
Suitable for Anodizing.
1.66"
For use with glass up to 9/16" thick.
Finish TOP RAIL END CAP INTERNAL SPLICE HORIZONTAL MITER CORNER VERTICAL MITER CORNER
Mill GR2168 GR2168S GR2168MK
Satin, Circum. GR2168.4 GR2168EM GR2168S
CUSTOM SERVICES
Satin Anodized GR2168.4AN GR2168EM.AN GR2168S GR2168MK.4AN GR2168MKV.4AN
t
shopwagner.com 103
Glass Railing Top Rail Sections and Gaskets
a
b
19 /16"
GR90915-8 1
/4"
The Polycarbonate Channel Cap protects the glass edge and 3M VHB Tape
secures glass panels together – use 3M VHB Tape GR938. 3
/4" Wide. 108 Foot Roll. GR938
Many local codes require that the Top Railing meet a specific High bond double-sided, clear tape.
load requirement. Confirm with your local authorities prior to
specifying the use of this Top Rail style – refer to page 238. PART NUMBER
Clear Tape GR938
Glass a b CLEAR POLYCARBONATE
/2" monolithic
1
1" 1
/2" GR90915-8
1
/2" laminated 11/8" 19
/32" GR91015-8
3
/4" laminated 13/8" 27
/32" GR91315-8
Protective Insert
This new universal protective insert will work with a
broad range of glass sizes and Top Rail. Attach to top
of glass with adhesive strip provided then expose
top adhesive strip prior to placing Slotted Top Rail
over Insert which will fold sides into place. A silicone
bead may be needed depending on glass/Top Rail
dimensions.
Length PVC Self Adhesive Strips Sold flat in 20, 40, 100 or 250
20' GR9397-20 foot coils. Folds into shape once
40' GR9397-40 Slotted Top Rail is put into place.
21/4"
100' GR9397-100 Spray glass cleaner is suggested
250' GR9397 to simplify insertion.
b
Protective Insert
These Inserts protect the top edge of the glass from making contact with
the metal rail cap. Secure with 3M VHB Tape GR938 or GR95CBL Silicone. c
Choose based on depth of Top Rail and thickness of panel.
a
a
glass thickness b c Length PVC
GR9395-5
3
/4" 7
/8" 1 /4"
1
5' GR9395-5
b
1
/2" 3
/4" 1" 5' GR9390-5
1
/2" 3
/4" 11/4" 5' GR9391-5
c
a
GR9391-5
Silicone
Neutral cure, waterproof formula. Used to adhere Cladding to
Shoe Moulding, Top Rail to glass and seal over Backer Rod.
Black, 10 Fluid Ounces GR95CBL
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
104 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Glass Railing Top Rail Sections
t
10' Lengths.
Longitudinal Satin or Bright Polished Finish.
Type 316 Stainless Steel available upon request.
Two roll formed sections are welded
STANDARD PRODUCTS
together to provide this configuration.
For 1/2" to 3/4" glass. Select gaskets or silicone – as GR3207
appropriate – see page 104. c
a
Stainless Steel, Type 304
INTERNAL HORIZONTAL VERTICAL MITER
a b c t Finish TOP RAIL END CAP SPLICE MITER CORNER CORNER
2.00" 11/2" 7
/8" .050" Satin GR3207.4 GR3207E.4 GR3207S GR3207MK.4L GR3207MKV.4L
2.00" 11/2" 7
/8" .050" Polished GR3207.7 GR3207E.7 GR3207S GR3207MK.7 GR3207MKV.7
2.50" 11/2" 7
/8" .062" Satin GR3257.4 GR3257E.4 GR3257S GR3257MK.4L GR3257MKV.4L
2.50" 11/2" 7
/8" .062" Polished GR3257.7 GR3257E.7 GR3257S GR3257MK.7 GR3257MKV.7
3.00" 11/2" 3
/4" .065" Satin GR330L.4 GR330LE.4 GR330LS GR330LMK.4 GR330LMKV.4
RAILING SYSTEMS
3.00" 11/2" 3
/4" .065" Polished GR330L.7 GR330LE.7 GR330LS GR330LMK.7 GR330LMKV.7
3.50" 11/2" 3
/4" .065" Satin GR335L.4 GR335LE.4 GR335LS GR335LMK.4 GR335LMKV.4
3.50" 11/2" 3
/4" .065" Polished GR335L.7 GR335LE.7 GR335LS GR335LMK.7 GR335LMKV.7
4.00" 11/2" 3
/4" .065" Satin GR340L.4 GR340LE.4 GR340LS GR340LMK.4 GR340LMKV.4
4.00" 11/2" 3
/4" .065" Polished GR340L.7 GR340LE.7 GR340LS GR340LMK.7 GR340LMKV.7
Brass, C27000
INTERNAL HORIZONTAL VERTICAL
a b c t Finish TOP RAIL END CAP SPLICE MITER CORNER MITER CORNER
1.50" 1" 5
/8" .050" Satin GR415L.4 GR415LE.4 GR415LS GR415LMK.4 GR415LMKV.4
TRADITIONAL RAILING
1.50" 1" 5
/8" .050" Polished GR415L.7 GR415LE.7 GR415LS GR415LMK.7 GR415LMKV.7
2.00" 11/2" 7
/8" .050" Satin GR420L.4 GR420LE.4 GR420LS GR420LMK.4 GR420LMKV.4
2.00" 11/2" 7
/8" .065" Polished GR420L.7 GR420LE.7 GR420LS GR420LMK.7 GR420LMKV.7
2.50" 11/2" 7
/8" .062" Satin GR425L.4 GR425LE.4 GR425LS GR425LMK.4 GR425LMKV.4
2.50" 11/2" 7
/8" .065" Polished GR425L.7 GR425LE.7 GR425LS GR425LMK.7 GR425LMKV.7
3.00" 11/2" 3
/4" .065" Satin GR430L.4 GR430LE.4 GR430LS GR430LMK.4 GR430LMKV.4
3.00" 11/2" 3
/4" .065" Polished GR430L.7 GR430LE.7 GR430LS GR430LMK.7 GR430LMKV.7
3.50" 11/2" 3
/4" .065" Satin GR435L.4 GR435LE.4 GR435LS GR435LMK.4 GR435LMKV.4
3.50" 11/2" 3
/4" .065" Polished GR435L.7 GR435LE.7 GR435LS GR435LMK.7 GR435LMKV.7
4.00" 11/2" 3
/4" .065" Satin GR440L.4 GR440LE.4 GR440LS GR440LMK.4 GR440LMKV.4
4.00" 11/2" 3
/4" .065" Polished GR440L.7 GR440LE.7 GR440LS GR440LMK.7 GR440LMKV.7
CUSTOM SERVICES
APPENDIX
shopwagner.com 105
Glass Railing Top Rail Fittings
Fittings
Available in satin and polished finishes. Satin finishes
are longitudinal or circumferential and availability End Caps
varies by material and size. Contact Wagner Refer to page 69 for
regarding finish options. Options.
b Internal Splice
Sleeve style varies based on
Top Rail. Roll Formed Sleeves are
set into place with Lido-Weld
Formed
Adhesive. Extruded Aluminum
Sleeves require 3M™ Scotch-
Weld™ Epoxy. Confirm at the time
of your order.
Refer to page 67 for Options.
Extruded
a
d a
Vertical Miter Elbow
Miter Elbow requires Internal Splice for attachment to Slotted
c
Tubing.
3"
b
c
b
3"
d
a
b
Adhesives
Refer to page
29 for structural
adhesives.
106 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
The New Standard STANDARD PRODUCTS
RAILING SYSTEMS
TRADITIONAL RAILING
CUSTOM SERVICES
in Glass Railing
APPENDIX
The Wagner PanelGrip System utilizes a unique PanelGrip shoe is almost 30% lighter than standard Base
Shoe Moulding yet meets structural load requirements for
locking mechanism of high-strength Aluminum and railings.
PVC Isolators combined with a specially designed • Broadest Grip Range In One Base Of Any Dry Glaze Option
Aluminum Base Shoe Moulding. F or Monolithic and Laminated Tempered Glass. Options
available to work with any panel between 1/2" and 7/8" (12.7mm
When assembled with tempered or laminated and 21.5mm).
tempered glass of the appropriate size, PanelGrip • No Special Tools Required
enables the installer to fabricate a structural Glass All you need is an Allen wrench for installation or removal.
Railing System with significant reductions in labor • No Mess
and freight costs over standard wet glaze options. No mixing and pouring of expansion cement.
No running of cement on incline.
41/8"
.437" -.663" 21/2" COUNTERBORED
b 21/2"
27/8"
/4"
1" 5.01 10' GR2457HCB-10
3
2 3/4"
27/8"
a
Gasket – Black
/4"
3
* Due to glass dimensional tolerances, you must confirm that your selected Gasket 100' GR9355-100
3
108 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
PanelGrip® 2 Installation
STANDARD PRODUCTS
1. Plumbing PanelGrip Base Shoe MouldinG or our PGTWRENCH to make the PanelGrip Cap Screw snug-
Before completing attachment of PanelGrip Base Shoe Moulding tight, then continue tightening to 10 ft-lbf (120 in-lbf) of torque.
to substrate – take all necessary steps to assure that the Repeat on all other PanelGrip mechanisms to secure the panel
mounted Shoe is adjusted such that the inside channel of the in position. DO NOT OVERTIGHTEN.
Shoe is plumb to +/- 1/8" at an extended height of 42". Spend the PanelGrip Torque Wrench
time required to plumb the Shoe to this tolerance since the glass 3
/8" Torque Wrench, 3/8" Drive,
will only be as plumb as the Shoe. 20-200 in-lbf. For setting PanelGrip
2. Clear the PanelGrip Base of All Debris. mechanism into PanelGrip Base
3. Place Isolators Shoe Moulding.
Place the PanelGrip Plastic Isolators into the PGTWRENCH
Base Shoe Moulding. On inclines, a dab of PGTWRENCH
RAILING SYSTEMS
silicone may be used to keep them in place
while placing glass. Space Plastic Isolators a 8. Insert Spacing Pads
maximum of 14" on center with a maximum of Repeat with other lites of glass. Insert 1/4" Spacing Pads
4" in from the left and right edges of each panel between glass panels to prevent glass-to-glass contact. Trim
– 4 isolators per 4 foot panel. as required.
4. Place Glass
Place the glass atop the Plastic Isolators in the
Base Shoe Moulding.
Warning: With multi-panel Railings, do not
line up the edge of a panel with the end of
the Base Shoe Moulding – place the panels
TRADITIONAL RAILING
so that they span PanelGrip Base Shoe
Moulding butt joints to assist in alignment.
Spacing Pad
5. Insert PanelGrip
Have someone hold the panel in place while
you insert the Aluminum PanelGrip mechanism 9. Seal top of shoe
into place on the opposite side of the glass in Once glass is properly positioned, seal gap at the top of the
alignment with the Plastic Isolators. Make sure PanelGrip Base Shoe Moulding using one of the two Gasket
that the plastic pad on the PanelGrip is facing styles shown on page 108. Spray glass cleaner onto glass to
the glass. facilitate insertion of gaskets.
6. Tighten PanelGrip
Using a 3/16" hex head wrench or the PanelGrip
CUSTOM SERVICES
Torque Wrench, tighten the Cap Screw on the GR9302
PanelGrip mechanism. While tightening, the
plastic pad will break away from the Aluminum
as the unit expands. Cladding
7. Confirm Alignment and Tighten
Confirm alignment and make adjustments prior GR9355
to final tightening which will compress and lock •G
R9302 is taped to the underside of the top lip of the
the panel into place. Cladding.
Remember, PanelGrip is self-centering and self-
plumbing. Make sure you have properly plumbed • GR9355 is used without Cladding
the Shoe as noted in Step 1. Weep holes should be provided with exterior applications.
PanelGrip Spacing Guidelines 10. Removal of Glass
APPENDIX
Should you need to remove a panel, this can be done simply
Glass Panel Edge Glass Panel Edge
by loosening the PanelGrip Cap Screw.
shopwagner.com 109
Wet Glaze Glass Railing
41/8"
to match the Top Rail or area decor.
Base Shoe Moulding may be surface mounted, fascia mounted or
embedded in concrete. The Shoe is the key to the structural integrity of
/4"
any Glass Railing System. Proper attachment is extremely important –
3
refer to page 113. b
Counterbored Hole
Note: To avoid corrosion, Aluminum should be kept from directly contacting Steel or Portland-based Cement and Grout by
painting with a heavy coat of bituminous paint or an appropriate primer. For exterior applications, provide weep holes as needed.
1
/2" 1" 4" 10/Package GR9392PK /4" Glass
3
GR7ASB
11
b
3
/4" 11/4" 25' Spool GR9393 RSB1T Spacer Block Tool RSB1T
3
/4" 11/4" 4" 10/Package GR9393PK
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
110 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Glass Railing Wet Glaze
Wet Glazing
1. Place Setting Blocks onto Glass 4. Set Glass with Quick Setting Anchor Cement
Place Setting Blocks – 4" to 6" in length – onto the bottom. Mix quick setting Grout – similar to Rockite® – page 115 – per
Start at 1/4 of the length in from the end of each panel. One package instructions and fill void around glass as needed. A
package of 10 per 5 feet will be more than sufficient. Place Grout Bag – page 115 – is one method of introducing Grout into
panel with Setting Block into Base Shoe Moulding. the Base Shoe Moulding.
STANDARD PRODUCTS
Note: Portland based Grout must not be used in setting the
glass into the Aluminum Base Shoe Moulding.
5. Seal Top of Base Shoe Moulding
Seal top of Base Shoe Moulding with Top Gasket. Spray glass
cleaner may be used to facilitate insertion of the Top Gasket.
Rubber Top Gasket finishes off the top of the Base Shoe
Moulding pocket after glass has been set.
Spacing Pad
Setting Block
RAILING SYSTEMS
2. Spacing and Sealing Pads
Insert 1/4" Spacing and Sealing
Pads between glass panels to
prevent glass-to-glass contact
and to act as a dam for your
desired pour area. Use Rigid
Spacer Blocks for slant pours.
TRADITIONAL RAILING
Trim as required. When a more positive seal is required for exterior applications,
3. Secure and Plumb the Glass roll in a 3/8" Foam Backer Rod and run a cap bead of Neutral
Plumb and level glass in the Shoe using non-metallic Shims Cure Silicone over it. Weep holes should be provided with
as needed. exterior applications.
CUSTOM SERVICES
APPENDIX
shopwagner.com 111
Base Shoe Moulding Accessories
Weld Block
Supplied with centered 1/2"-13 tapped hole. ’S
GN E R
Size Package STEEL WA
R
21/2" × 23/4" × 1/2" 10 GR175WB-10
FO
Note: For structural purposes, it may be required to
LOOK
weld Weld Blocks on three sides. This will require a
thicker Weld Block for clearance. Contact Wagner with
your specifications. Glass Mount
Handrail Brackets
Drain Block
1
-2
These Drain Blocks are placed under exterior 20
installed Base Shoe Mouldings to provide see pages
drainage. One Drain Block should be placed
under each mounting hole. They may be rotated
for use with any available Base Shoe Moulding.
Size Package Color ALUMINUM
21/2" × 23/4" × 1/4" 10 Black GR225DB-10 Stackable Shims
51/8" Overall. 5/8" Slot Hole. 1,008/case
Cap Screws May be stacked as necessary.
Low profile, flat head, socket head for Supplied by the case – 63 stacks of 16 shims, stacked 1" high.
mounting to tapped Steel substrates. Washer 41/8" 1"
included. Use with Base Shoe Moulding with
Counterbored Holes.
17/8"
Recommended Torque: 43 ft-lbf.
STEEL
Package ZINC PLATED STAINLESS 5
/8" 1/2" 1/2" 1/2" 2"
/2-13 × 3/4"
1
10 SHC1Z1213-0750 SHC3N1213-0750 Thickness Stacks per Case Shims per Stack PLASTIC
/16"
1
63 16 GRGL16
Self Tapping Concrete Anchor
Use for Base Shoe Moulding
with Counterbored Holes.
Use 1/2" masonry bit
STEEL Horseshoe Shims
Package ZINC PLATED 2" Wide × 3" Long. 10/package.
1
/2" × 41/2" 25 KHEZ500-0450 Thicknesses as noted below. Will not
compress or project beyond the Base
Shoe Moulding. May be stacked as
Expansion Anchor necessary.
Use for Base Shoe Moulding
with Counterbored Holes. Use Thickness ALUMINUM
9
/16" masonry bit.
1
/16" GR2HS06
1
/8" GR2HS12
STEEL 1
/4" GR2HS25
Package ZINC PLATED
1
/2" × 51/8" 20 HSL3M1040
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
112 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Base Shoe Moulding Cladding and Pool Fence Spigots
7 7 7 7 7 7 7 7 7
a /8" /16" /8 " /8 " a a a /8" /8" /8" /16" /16" 7/16" 7
/8 " 7
/8 " 7
/8" 7/8" 7
/8" 7
/8"
/8"
/8"
/8"
/8"
/8"
/8"
/8"
/8"
7
7
Contact Wagner for
Cladding for Base Shoe Moulding
STANDARD PRODUCTS
Custom Cladding for
h
h
h
h
10' Lengths Fascia, Embed, Wedge Block
and Drain Block
SATIN ANODIZED SATIN POLISHED POLISHED
a h Thick. ALUMINUM STAINLESS STAINLESS BRASS ALLOY 260 applications.
/8" 41/8"
7 1
/16" GR2802.4AN GR3802.4 GR3802.7 GR4802.7
RAILING SYSTEMS
1. Apply two rows of Tape 2. A
pply two rows of Tape 3. Apply Silicone to the
to the vertical face of the to the vertical face of vertical face of the
Cladding and apply a the Cladding. Cladding. Use clamps
GR975 Silicone bead between to hold the Cladding in
Cladding Tape the rows. place until the Silicone
cures.
3
/4" × 108' Roll
Pressure sensitive, high strength
adhesive used for adhering Cladding and
End Caps to Base Shoe Moulding.
TRADITIONAL RAILING
PART NUMBER
Cladding Tape GR975
115/16"
Glass Pool Fence Attachment
Embedded Mount.
For Use With 1/2" to 3/4" Tempered Glass.
Confirm with your local authorities
51/2"
regarding wind load and structural
CUSTOM SERVICES
requirements. Contact
ags@mailwagner.com for
81/4"
more information.
9 /8"
7
SATIN STAINLESS
LXF20
41/2"
APPENDIX
shopwagner.com 113
Base Shoe Moulding Attachment
Preparation
Base Shoe Moulding Attachment 1. Prepare substrate for attachment of Base Shoe Moulding
Attachment of the Aluminum Base Shoe Moulding per your surface and selected choice of fastener (i.e. Self-
is critical to the success of any Glass Railing Tapping Concrete Anchor or Expansion Anchor attachment
installation. These details depict six typical to concrete; or high strength Low Profile Cap Screw
attachment to Steel).
attachment methods. Other methods of attachment 2. Set Base Shoe Moulding into position aligning holes with
are possible but their integrity would need to be those in your substrate.
determined by the installer in cooperation with your 3. Place your Anchor into the holes. Engage Anchor but do not
own engineer. If you choose to mount to wood, torque into final position at this time.
consult with an engineer for proper reinforcement of 4. Shim and level length of shoe to same elevation then
tighten per manufacturer's torque recommendations.
the substrate.
GR9302 Gasket Section Through Attachment Hole
1
GR9355 Gasket E
/4" Minimum Lip 1
/2" or 3/4" Glass Weep Holes
GR9398 Gasket Provide weep
holes for exterior
A D Wet Glazing applications.
Cladding
Counterbored Hole
Setting Block
1
/2" Cap Screws
Weld Block 12" On Center
Anchors:
1
/2" Minimum
Cladding
3
/8" × 3" T Bolts
1
B 18" On Center in Steel Angle
/2" × 4" Thickness
4000 psi Concrete
Self Tapping
5" Minimum Slab
Concrete Anchor
or Expansion Anchor
1
/2" × 4" Steel Plate Minimum Distance From Edge
With Minimum of × 31/2" of of Slab to Center of Glass = 51/2"
Concrete Under Plate C
• Use the pre-drilled holes in the Base Shoe Moulding as a field then welded to the steel substrate.
template to drill holes in the concrete. Use a masonry bit • Custom sized Cladding is available to cover your Weld
depth of hole. Blocks on three sides. This will require a thicker Weld Block for
• Vacuum all loose debris from within the hole. clearance. Contact Wagner with your specifications.
• Insert the Anchor through the base Base Shoe Moulding E – Attachment to Embedded Steel
and into the drilled hole. • A 1/2" × 4" steel strip is drilled and tapped for 1/2-13 thread,
• Continue tightening until firmly seated against the Base 12" on center; and 3/8" × 3" T Bolt Anchors are welded to the
Shoe Moulding. underside of the steel strip, 18" on center.
• Shim and level Base Shoe Moulding before final tightening of • Prior to placing in wet concrete, take precautions to
Anchors. protect threaded holes from filling with wet concrete.
• Use an impact wrench set to a torque as recommended by • When cured, secure the Base Shoe Moulding with 1/2-13 × 3/4"
the Anchor manufacturer for final attachment. Low Profile Cap Screwswith Washers.
B – Embedded in Concrete
When design parameters require a hidden floor attachment, a Attachment Locations:
poured in place Base Shoe Moulding may be appropriate. With • Lengths less than 1'-6", two attachment minimum.
this attachment method, the glass will appear to rise directly out • L engths between 1'-6" and 2'-6", three attachment minimum.
of the floor. • Lengths over 2'-6", space attachments 12" on center.
C – Fascia Mount • The first hole should be located 3" from the end of the Shoe
The Base Shoe Moulding may be side mounted to a Steel angle Moulding on lengths less than 2'-6" and 6" from the end on
or substrate as shown above. lengths over 2'-6".
D – Weld Block with Steel Substrate • Drill additional holes in Base Shoe Moulding as required.
If a structurally sound Steel substrate is present and you wish • For exterior applications, the heads of the attachments
to avoid drilling and matching Base Shoe Moulding holes with should be covered with Silicone and provide weep holes to
substrate holes, Steel Weld Blocks may be used. avoid water accumulation.
114 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Glass Railing
STANDARD PRODUCTS
RAILING SYSTEMS
TRADITIONAL RAILING
Job: Amway Arena, Orlando, FL
Fabricator: Dixie Metal Products, Ocala, FL
Photo by Randle Communications, Inc.
CUSTOM SERVICES
APPENDIX
shopwagner.com 115
Glass Spiders and Stand-Offs
116 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
STANDARD PRODUCTS
RAILING SYSTEMS
TRADITIONAL RAILING
CUSTOM SERVICES
Precision by Design APPENDIX
shopwagner.com 117
Two Legato Options
TM
to Choose From
The Legato Railing Options accommodate guard, stair or ramp applications for a range of glass
TM
thicknesses. The glass infill is secured via glass mounting hardware. These options are available in an assortment of
post shapes and glass mounting designs, offering surface, embedded and fascia post mounting options with mid, end
and corner post configurations.
These posts may be configured as end or intermediate posts; and surface mount, fascia mount or embed mount.
Contact ags@mailwagner.com regarding stair or ramp options.
118 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Legato™ SRP
SRP Railing
Solid Rectangular Post System
STANDARD PRODUCTS
• Type 316 Stainless Steel
• No Welding Required
• For Post and Fascia Mount Applications
RAILING SYSTEMS
TRADITIONAL RAILING
CUSTOM SERVICES
APPENDIX
shopwagner.com 119
Legato™ SRP
The Wagner Solid Rectangular Post System transforms your Roll Formed Top and Bottom Rail
guard design with its clean lines, ease of installation and full Type 316 Stainless Steel. Satin Finish.
compliance with international building code requirements.
SRP simplifies your fencing and other guard installations by 6' LENGTH 18' LENGTH
Diameter Wall STAINLESS STAINLESS
eliminating off-site fabrication and fitup. Measure, trim and install
1.66" .059" GR3168.4-6 GR3168.4
with exceptional results.
Protective Insert
This Insert protects the edge of the glass
from making contact with the metal rail cap.
Secure with GR95CBL Silicone.
glass width depth Length PVC
/2"
1 3
/4" 1" 5' GR9390-5
SRP Posts
These Posts are 42" high and are produced from 1/2" x 2" Flat Bar.
Type 316 Stainless Steel with a brushed satin finish. Shown for
surface mount – also may be produced for fascia mount.
Surface
Mount
Facia
Mount
No Welding
Required
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
120 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Legato™ SRP Assembly
STANDARD PRODUCTS
bottom, one for top.
plumb; shim as needed.
Slotted Tube
6. Slide lower spool covers onto
slotted tube
7. P
lace bottom slotted tube
between bottom spools and
RAILING SYSTEMS
slide covers to post, tighten
set screws.
Spool Cover
Spool cover in place; tighten
set screw.
TRADITIONAL RAILING
8. P
lace rubber gasket on 9. Place rubber gasket on top
bottom edge of glass panel edge of glass.
and place in lower slotted 10. Place top slotted tube on
tube. glass.
CUSTOM SERVICES
11. Slide upper spool covers to 12. Slide upper spool covers to
posts. posts and tighten screws.
APPENDIX
shopwagner.com 121
Legato™ Posts
End Mid
Post Post
t
Stainless Steel Pipe
Type 304 and 316
Satin Finish
20' Random Lengths, Except as Noted
† Denotes 18' Lengths OD
Rounded Clip Square Clip Single Point Spider
Pipe TYPE 316 TYPE 304
Size Sch. OD ID t lb/ft SATIN STAINLESS SATIN STAINLESS
11/4 5 1.660 1.542 .059 1.120 P763.4†
11/4 10 1.660 1.442 .109 1.810 P3166104.4†
11/4 40 1.660 1.380 .140 2.294 P813.4 P792.4
11/2 5 1.900 1.770 .065 1.274 P843.4†
11/2 10 1.900 1.682 .109 2.085 P3190104.4†
11/2 40 1.900 1.610 .145 2.743 P911.4 P897.4
Single Flat Arm Double Flat Arm
Legato Round Post – 1 1/2" Schedule 40 (1.90" Diameter with .145" Wall)
These Posts are 42" high and are produced from 1 1/2" Schedule 40 Pipe (1.90" Diameter with a .145" Wall). Type 316 Stainless Steel with
a brushed satin finish. Shown for surface mount – also may be produced for embedded or fascia mount.
Surface
Mount
Facia
Mount
Embed
Mount
END POST MID POST END POST MID POST END POST MID POST END POST MID POST
MOUNT SQUARE CLIP SQUARE CLIP ROUNDED CLIP ROUNDED CLIP TWO POINT CLIP TWO POINT CLIP SINGLE FLAT ARM DOUBLE FLAT ARM
Surface LG31942AESM.4 LG31942AMSM.4 LG31942BESM.4 LG31942BMSM.4 LG31942CESM.4 LG31942CMSM.4 LG31942DESM.4 LG31942DMSM.4
Fascia LG31942AEFM.4 LG31942AMFM.4 LG31942BEFM.4 LG31942BMFM.4 LG31942CEFM.4 LG31942CMFM.4 LG31942DEFM.4 LG31942DMFM.4
Embed LG31942AEEM.4 LG31942AMEM.4 LG31942BEEM.4 LG31942BMEM.4 LG31942CEEM.4 LG31942CMEM.4 LG31942DEEM.4 LG31942DMEM.4
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
122 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Legato™ Posts
STANDARD PRODUCTS
Surface
Mount
Facia
Mount
RAILING SYSTEMS
Embed
Mount
END POST MID POST END POST MID POST END POST MID POST END POST MID POST
MOUNT SQUARE CLIP SQUARE CLIP ROUNDED CLIP ROUNDED CLIP TWO POINT CLIP TWO POINT CLIP SINGLE FLAT ARM DOUBLE FLAT ARM
Surface LG32242AESM.4 LG32242AMSM.4 LG32242BESM.4 LG32242BMSM.4 LG32242CESM.4 LG32242CMSM.4 LG32242DESM.4 LG32242DMSM.4
Fascia LG32242AEFM.4 LG32242AMFM.4 LG32242BEFM.4 LG32242BMFM.4 LG32242CEFM.4 LG32242CMFM.4 LG32242DEFM.4 LG32242DMFM.4
Embed LG32242AEEM.4 LG32242AMEM.4 LG32242BEEM.4 LG32242BMEM.4 LG32242CEEM.4 LG32242CMEM.4 LG32242DEEM.4 LG32242DMEM.4
TRADITIONAL RAILING
Legato Flat Blade – 1/2" x 2" Rectangular Bar
These Posts are 42" high and are produced from 1/2" x 2" Bar. Type 316 Stainless Steel with a brushed satin finish. Shown for surface
mount – also may be produced for embedded or fascia mount.
CUSTOM SERVICES
Surface
Mount
Facia
Mount
APPENDIX
Embed
Mount
END POST MID POST END POST MID POST END POST MID POST END POST MID POST
MOUNT SQUARE CLIP SQUARE CLIP ROUNDED CLIP ROUNDED CLIP TWO POINT CLIP TWO POINT CLIP SINGLE FLAT ARM DOUBLE FLAT ARM
Surface LG32542AESM.4 LG32542AMSM.4 LG32542BESM.4 LG32542BMSM.4 LG32542CESM.4 LG32542CMSM.4 LG32542DESM.4 LG32542DMSM.4
Fascia LG32542AEFM.4 LG32542AMFM.4 LG32542BEFM.4 LG32542BMFM.4 LG32542CEFM.4 LG32542CMFM.4 LG32542DEFM.4 LG32542DMFM.4
Embed LG32542AEEM.4 LG32542AMEM.4 LG32542BEEM.4 LG32542BMEM.4 LG32542CEEM.4 LG32542CMEM.4 LG32542DEEM.4 LG32542DMEM.4
shopwagner.com 123
Glass Panel Mounting Clips
1.33"
1.33"
.60" .60"
13/4"
21/2" 13/4" 21/2"
Glass Clip Type 316 Stainless Steel Glass Clip Type 316 Stainless Steel
Gaskets supplied to permit use with 1/2" to 5/8" glass or panels. Gaskets supplied to permit use with 1/2" to 5/8" glass or panels.
Panel SATIN SATIN
Use With Thickness STAINLESS POLISHED STAINLESS Use With: Panel Thickness STAINLESS POLISHED STAINLESS
1.5" - 1.7" OD 1
/2"- 5/8" GR305R.4 GR305R.7 Flat 1
/2"- 5/8" GR310F.4 GR310F.7
1.9" or 2" OD 1
/2"- 5/8" GR310R.4 GR310R.7
1.33"
1.33"
.60" .60"
13/4"
13/4"
21/2" 21/2"
Glass Clip Type 316 Stainless Steel Glass Clip Type 316 Stainless Steel
Gaskets supplied to permit use with 1/2" to 5/8" glass or panels. Gaskets supplied to permit use with 1/2" to 5/8" glass or panels.
Panel SATIN POLISHED SATIN POLISHED
Use With Thickness STAINLESS STAINLESS Use With: Panel Thickness STAINLESS STAINLESS
1.5" - 1.7" OD 1
/2"- 5/8" GR305R.4-R GR305R.7-R Flat /2"- 5/8"
1
GR310F.4-R GR310F.7-R
1.9" or 2" OD 1
/2"- 5/8" GR310R.4-R GR310R.7-R
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
124 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914
Glass Panel Mounting Clips
15/8" 15/8"
13/8"
13/8"
1
1
/2" /2"
STANDARD PRODUCTS
21/8"
21/8"
27/16" 23/16"
Glass Clip Type 304 Stainless Steel Glass Clip Type 304 Stainless Steel
Gaskets supplied to permit use with 3/8" or 1/2" glass or panel. Gaskets supplied to permit use with 3/8" or 1/2" glass or panel.
Mounting Screw – M8 × 1.25" – included. Mounting Screw – M8 × 1.25" – included.
SATIN SATIN
Use With STAINLESS POLISHED STAINLESS Use With: STAINLESS POLISHED STAINLESS
RAILING SYSTEMS
1.9" or 2" OD GR320R.4 GR320R.7 Flat GR320F.4 GR320F.7
13/4" 13/4"
17/16"
17/16"
/2"
/2"
TRADITIONAL RAILING
1
1
1
1
/2" /2"
21/8"
21/8"
25/8" 23/8"
Glass Clip Type 304 Stainless Steel Glass Clip Type 304 Stainless Steel
For 1/2" - 5/8" glass or panel. Mounting hardware not included. For 1/2" glass or panel. Mounting hardware not included.
CUSTOM SERVICES
SATIN SATIN
Use With STAINLESS POLISHED STAINLESS Use With: STAINLESS POLISHED STAINLESS
1.9" or 2" OD 152813R-2 162813R-2 Flat 152813R-F 162813R-F
/8"
3
/8" glass using the Screws that are provided.
POLISHED
Use With: SATIN STAINLESS STAINLESS
21/8" 29/16"
1.90" or 2.00" OD 152816-2 162816-2
Flat 152816-F 162816-F
shopwagner.com 125
Glass Panel Mounting Clips
31/4" 31/4"
13/8"
13/4"
.12"
2.36" 2.36"
21/2"
.31"
.27"
13/16" 1
/4" CSK Holes
1"
Double Flat Arm Type 316 Stainless Steel
Adapter not included. Select based on your post style from styles
noted below. Mounting Screws are by others.
SATIN
Use With: STAINLESS
1.90" or 2" OD LXFP30-2 2"
/2"
.12"
13/16" hole sizes and placement for tempered and heat strengthened glass.
1
1"
1
1" 1"
(t) Glass thickness 1
/4" 3
/8" 1
/2"
.31"
13/8"
1
/4" CSK Holes (C) Distance between rims of holes 15/8" 27/16" 31/4"
(E) Distance from corner to 2rim
1
/2" of holes 15/8" 27/16" 31/4"
Single Flat Arm Type 316 Stainless Steel
(F) Minimum fillet radius 1
/4" 3
/8" 1
/2"
Adapter not included. Select based on your post style from styles
noted below. Mounting screws are by others.
t
SATIN
Use With: STAINLESS
1.90" or 2" OD LXFP30-1 E B
C
/2"
/2"
/2"
/2"
/2"
.12"
.12"
13/16"
1
1"
1"
1
1"
1
1 /8"
13/8"
1 /8"
13/8"
13/8"
13/8"
13/8"
13/8"
3
.27" 3
.27"
.27"
es
21/2" 21/2" 21/2"
NUMBERS IN BOLD TYPE are typically in stock. Other items may not be available for immediate shipment or are made-to-order –
requiring a minimum quantity and a longer lead time. Visit shopwagner.com for availability.
126 ISO 9001:2008 F 414 214 0450 • P 414 214 0444 • T 888 243 6914