Professional Documents
Culture Documents
Thermostat XH-W3001 PDF
Thermostat XH-W3001 PDF
Reset
Power state, while holding down the “up” “down” button, digital display “888” and then automatically jump to the detection temperature, then
restore the factory settings
When setting the heating mode, if the set temperature value is set to the opposite, the output indicator will not light, the load will not work. If
the above situation occurs after setting, you can check whether the set temperature value has the opposite.
60m
m NTC 10K sensor
mm
m45 m
31
12 VDC
24 VDC
230 VAC
2 point On/Off Output
+ -
L N
info@hexacontrols.com www.hexacontrols.com