Professional Documents
Culture Documents
EU Product Catalogue
2019 V.1
COCKPIT SMART HOME d.o.o.
Ulica Klementa Juga 007
5250 Solkan, Slovenia
+386 5 335 95 00
sales@yourcockpit.biz
www.yourcockpit.biz
TABLE OF CONTENTS
1
MAIN GATEWAY
DESCRIPTION
COCKPIT main Gateway is used to configure wireless
network, control switches, dimmers, motion sensors,
temperature sensors, and other modules/devices
(elements of home automation) & Support creation of
scenes, schedules, events and notifications.
CHARACTERISTICS
RJ45 Ethernet port
FRONT and BACK (hidden) button
RGB LED for user interaction
Power Supply
Adapter (AC/DC): input ~100-240 V, 0.3 A, 50/60 Hz;
output DC 5 V, 2 A
Micro USB port for power supply only
Wireless
Wireless network 802.11n, 2.4Ghz compatible
Z-Wave Plus™ @868MHz for EU market
Operating temperature
Indoor usage only, 40° C max
Hardware
MIPS 24Kc CPU with 650MHz clock
Flash Memory: SPI NAND 128MB
Memory: DDR2 64MB
Dimensions: 108x108x26.7mm (WxDxH)
2
SINGLE ON/ OFF DOUBLE ON/ OFF
DESCRIPTION DESCRIPTION
On/Off module switches On or Off the electrical device Double On/Off switches On or Off two electrical devices
(e.g. light, fan, etc ...). It can be controlled either through a (e.g. lights, fans, etc ...). It can be controlled either through a
wireless network or through the wall switch. wireless network or through the wall switches. The module
is designed to be mounted inside a “flush mounting box”
The module is designed to be mounted inside a “flush and is hidden behind a traditional wall switch.
mounting box” and is hidden behind a traditional wall
switch. Module measures power consumption of electrical It measures power consumption of two electrical devices
device and supports connection of digital temperature and supports connection of digital temperature sensor.
sensor.
CHARACTERISTICS
CHARACTERISTICS Power supply: 110 - 230VAC ±10% 50/60Hz, 24- 30VDC
Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC Rated load current of AC output (resistive load): 2x4A / 230VAC
Rated load current of AC output (resistive load): 1x10A / 230VAC Rated load current of DC output (resistive load): 2x4A / 30VDC
Rated load current of DC output (resistive load): 1x10A / 30VDC Output circuit power of AC output (resistive load): 2x920W
Output circuit power of AC output (resistive load): 2300W (230VAC)
(230VAC) Output circuit power of DC output (resistive load): 2x96W
Output circuit power of DC output (resistive load): 240W(24VDC) (24VDC)
Digital temperature sensor range (sensor must be ordered Digital temperature sensor range (sensor must
separately): -50 ~ 125°C be ordered separately): -50 ~ 125°C
Operation temperature: -10 ~ 40°C Operation temperature: -10 ~ 40°C
Monitoring: Monitoring:
- Electrical power load in W - Electrical power load in W
- Electric energy consumption in kWh - Electric energy consumption in kWh
Power monitoring accuracy: P=5~50W, ±3W P>50W, ± 3% Power monitoring accuracy:
Distance: up to 30m P=0~200W, ±2 W P>200W, ± 3%
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Distance: up to 30m
Package dimensions (WxHxD): 79mm x 52mm x 22mm Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm
Weight: 28g Package dimensions: 79mm x 52mm x 22mm
Brutto weight (package): 34g Weight: 28g
Electricity consumption: 0,4W Brutto weight (package): 34g
For installation in boxes: Ø ≥ 60mm or 2M Electricity consumption: 0,4W
Switching: Relay For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
3
SINGLE ON/ OFF D ON/OFF THERMOSTAT
DESCRIPTION DESCRIPTION
On/Off D module switches On or Off the electrical device On/Off thermostat is ideal for directly controlling electric
(e.g. light, fan, etc...). Output contact is voltage free (dry or water-based underfloor heating systems, electric water
contact), so also loads with different power supply can be heaters, hot water pumps, electric radiators and similar. You
connected to the module. can control it either remotely through the Z-Wave network
or through wall switches.
The module can be controlled either through a wireless
network or through the wall switch. It also measures power consumption and supports the
The module is designed to be mounted inside a “flush connection of a digital temperature sensor.
mounting box” and is hidden behind a traditional wall
switch. CHARACTERISTICS
Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC
Module supports connection of digital temperature sensor. Rated load current of AC output (resistive load): 1X 10 A /230VAC
Rated load current of DC output (resistive load): 1X 10 A /30VDC
CHARACTERISTICS Output circuit power of AC output (resistive load):
Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC 2300W (230VAC)
Rated load current of AC output (resistive load): 1x10A / 230VAC Output circuit power of DC output (resistive load): 240W(24VDC)
Rated load current of DC output (resistive load): 1x10A / 30VDC Power measurement accuracy: P=5–50W, +/- 3 W, P>50W, +/-3%
Output circuit power of AC output (resistive load): 2300W Digital temperature sensor range: -50° ~ +125°C, resolution 0.1°C
(230VAC) Digital temperature sensor cable length: 1000 mm
Output circuit power of DC output (resistive load): 240W Operation temperature: -10° ~ +40°C
(24VDC) Distance: up to 30 m indoors (depending on building materials)
Digital temperature sensor range (sensor must be ordered Dimensions (WxHxD): 41.8 x 36.8 x 15.4 mm
separately): -50 ~ 125°C Packaging Dimensions: 115 x 96 x 22 mm
Operation temperature: -10 ~ 40°C Weight (including packaging): 48 g (64 g)
Distance: up to 30m Electricity consumption: 0.4 W
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm For installation in boxes: Ø ≥ 60 mm or 2 M
Package dimensions: 79mm x 52mm x 22mm Switching: Relay
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,4W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay
4
DIMMER DIMMER 0-10V
DESCRIPTION DESCRIPTION
Dimmer is the first MOSFET-switching lights device that Dimmer 0-10V module is used for dimming lights, fan speed
also supports control of low-voltage halogen lamps with regulation and control of any other device with 0-10V input
electronic transformer, dimmable compact fluorescent control.
lights and dimmable LED bulbs. It also measures the
power consumption of electrical devices and supports the Module has a standard 0-10V output and a multi-function
connection of a digital temperature sensor. input, which may be a push button / switch, a potentiometer
or 0-10V signal.
Dimmer dims the light. It can be controlled either through a
wireless network or through the wall switch. CHARACTERISTICS
It is designed to be mounted inside a “flush mounting box” Power supply: 12-24VDC
Max. sinking control voltage: -20 / +20VDC
and is hidden behind a traditional wall switch.
Max. sourcing control voltage: 0-11VDC
CHARACTERISTICS Max. sinking current: 2mA
Power supply: 110 - 230VAC ±10% 50/60Hz, 24-30VDC Max. sourcing current: 10mA
Rated load current of AC output: 0,6A / 230VAC Digital temperature sensor range (sensor must be ordered
Rated load current of DC output: 0,85A / 30VDC separately): 50 ~ +125°C
Output circuit power of AC output (resistive load): 140W(230VAC) Operation temperature: -10 ~ +40°C
Output circuit power of DC output (resistive load): 21W (24VDC) Distance: up to 30 m indoors (depending on building materials)
Digital temperature sensor range (sensor must be ordered Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
separately): -50 ~ 125°C Package dimensions (WxHxD): 79mm x 52mm x 22mm
Operation temperature: -10 ~ 40°C Weight (Brutto with package): 28g (34g)
Monitoring: Electricity consumption: 0,5W
- Electrical power load in W
- Electric energy consumption in kWh
Power monitoring accuracy: ±2W
Distance: up to 30m
Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Package dimensions: 79mm x 52mm x 22mm
Weight: 28g
Brutto weight (package): 34g
Electricity consumption: 0,7W
For installation in boxes: Ø ≥ 60mm or 2M
Switching: MOSFET
5
RGBW DIMMER DIN DIMMER
DESCRIPTION DESCRIPTION
RGBW Dimmer is designed to control your RGB/RGBW DIN Dimmer is used for dimming bulbs. The module can
strips and LED strips or bulbs in order to create countless be controlled either through a Z-Wave network or through
color options and includes 5 special scene effects (Ocean, the wall switch. The module is designed to be mounted
Lightning, Rainbow, Snow and Sun). The wide range of inside an electrical cabinet onto DIN rail.
colors lets you “paint” your home according to your mood.
Module measures power consumption of bulb and
Highlight your favourite wall by illuminating a picture on it supports connection of digital temperature sensor. It is
in tones that you choose yourself. The module can work in designed to act as repeater in order to improve range and
combination with the other Z-Wave devices in your house. stability of Z-wave network.
You can control it either remotely through the Z-Wave
network or through wall switches.
CHARACTERISTICS CHARACTERISTICS
Power supply: 12-24VDC Power supply: 110 - 230VAC ±10% 50/60Hz, 24-30VDC
PWM output frequency: 488Hz Rated load current of AC output: 0,85A/ 230VAC
Rated output power: 8A for single output channel,13A at max. Rated load current of DC output: 0,85A / 30VDC
(3,25A for R.G.B.W. single output channel is suggested) Output circuit power of AC output (resistive load):
Max load (e.g. halogen bulbs): At 12V- 156W combined; 200W (230VAC)
At 24V- 312W combined Output circuit power of DC output (resistive load): 21W (24VDC)
LED Indicator: Red/Green Digital temperature sensor range (sensor must be ordered
Operation temperature: 0~40°C separately): -50 ~ 125°C
Distance: up to 30 m indoors (depending on building materials) Operation temperature: -10 ~ 40°C
Dimensions (WxHxD): 40.5 mm x 32 mm x 14.5 mm Distance: up to 30m indoors (depending on building materials)
Package dimensions: 79 mm x 52 mm x 22 mm Dimensions (WxHxD): 18x93x58mm
Weight: 28 g Package dimensions (WxHxD): 21x95x64mm
Gross weight (packaging included): 34 g Weight: 50g
Electricity consumption: 12V: 0.48W; 24V: 0.72W Brutto weight (package): 56g
Electricity consumption: 0,7W
For installation in boxes: DIN rail 35mm
Switching: MOSFET (Trailing edge)
6
SHUTTER SHUTTER DC
DESCRIPTION DESCRIPTION
Shutter controls the motor of blinds, rollers, shades, Shutter DC controls the 12-24VDC motor of blinds, rollers,
venetian blinds, windows, etc … It also supports shades, venetian blinds, windows, etc… It also supports
venetian blind slats tilting. The module can be controlled venetian blind slats tilting. The module can be controlled
either through a wireless network or through the wall either through a wireless network or through the wall
switch. Precise positioning is supported for motors switch.
equipped with mechanical or electronic end switches. Precise positioning is supported for motors equipped with
mechanical or electronic end switches.
It is designed to be mounted inside a “flush mounting box”
and is hidden behind a traditional wall switch. Module The module is designed to be mounted inside a “flush
measures power consumption of motor and supports mounting box” and is hidden behind a traditional wall
connection of digital temperature sensor. switch. It measures power consumption of motor and
CHARACTERISTICS supports connection of digital temperature sensor.
Power supply: 110 - 230VAC ±10% 50/60Hz CHARACTERISTICS
Rated load current of AC output (resistive load): 2x4A / 230VAC Power supply: 12-24VDC +/-10%
Output circuit power of AC output (resistive load): Rated load current of DC output (resistive load): 2A
2x920W (230VAC) Overcurrent protection: 6A
Digital temperature sensor range (sensor must be ordered Output circuit power of DC output (resistive load): 48W
separately): -50 ~ 125°C Digital temperature sensor range (sensor must be ordered
Operation temperature: -10 ~ 40°C separately): -50 ~ 125°C
Monitoring: Operation temperature: -10 ~ 40°C
- Electrical power load in W Monitoring:
- Electric energy consumption in kWh - Electrical power load in W
Power monitoring accuracy: P=0-200W, +/-2W; P>200W, +/-3%; - Electric energy consumption in kWh
Distance: up to 30m Power monitoring accuracy: +/-5%
Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Distance: up to 30m
Package dimensions: 79mm x 52mm x 22mm Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm
Weight: 28g Package dimensions: 79mm x 52mm x 22mm
Brutto weight (package): 34g Weight: 28g
Electricity consumption: 0,4W Brutto weight (package): 34g
For installation in boxes: Ø ≥ 60mm or 2M Electricity consumption: cca. 0,3W
Switching: Relay (2x) For installation in boxes: Ø ≥ 60mm or 2M
Switching: H bridge
7
RADIATOR THERMOSTAT RS ROOM SENSOR
DESCRIPTION DESCRIPTION
Radiator Thermostat controls radiator heating valves. RS Room Sensor is a battery operated temperature sensor.
When included into Z-Wave wireless network, its buttons
CHARACTERISTICS can also be used to control the heating system.
Power supply: 2x1.5V AA alkaline batteries, class III (SELV)
Low battery indication. CHARACTERISTICS
Operation temperature: 0 ~ 40˚C Battery: Alkaline 2 x AA, 1.5 V
Temperature setpoint range: 4 ~ 28˚C Battery lifetime: Up to 4-5 years
Maximum water temperature: 90˚C Backlight: Green LED
Distance: up to 30m. Ambient temperature: 0˚ to +40˚C
Dimensions: L: 91mm Ø: 51 (RA) Battery monitoring: The sensor has a built-in monitoring circuit,
Weight: 177g which will detect low or critical battery level.
Protection Class: IP 20 Transmission frequency: 868.42 MHz
Package includes: module, AA alkaline batteries(x2), adapter Transmission range in normal buildings: Up to 30 m
Transmission power: Max. 1 mW
IP class: 21
Dimensions: 81 mm x 66 mm x 21 mm
8
ELECTRIC HEATING THERMOSTAT A/C CONTROL
DESCRIPTION DESCRIPTION
Electric/Water Heating Thermostat is a Z-Wave Plus A/C Control translates wireless commands to AC IR control
enabled device for indoor temperature control. Water code. It has a built in temperature sensor which allows
Heating Thermostat is mainly applied to control wall Gateway to get the current room temperature.
mounted boiler, water valve/pump etc., while Electric CHARACTERISTICS
Heating Thermostat is for electrical heating system. The Power supply: USB Power DC 5V 100mA or 3xAAA dry batteries
device is of high reliability and practicability, which can be Low battery indication.
included and operated in any Z-Wave network with other Operation temperature: 0 ~ 40˚C
Z-Wave certified devices from any other manufacturers RF operating distance: up to 25m
CHARACTERISTICS IR operating distance: up to 8m line of sight
Power Supply: AC85-260V, 50/60HZ IP learning: max. 23 commands
Output: ≤ 16A Dimensions: Ø =70mm, T = 18mm (Main unit)
Self Consumption: ≤1W Ø =70mm, T = 15.5mm (Battery chassis)
External Temp. Sensor (optional): NTC R25°C=15KΩ, Weight: 60 g
B25°C/50°C=3550K Protection Class: IP 20
Working Environment: 0-50°C 0-90% RH (Non-condensation) Package includes: module (battery and USB cable not included)
Temperature Setting: 5-37°C 41-99°F (Adjustable)
Dimension: 86mm * 86mm *15mm
Hole Pitch: 60mm -61mm
9
3-IN-1 SENSOR DOOR/WINDOW SENSOR
DESCRIPTION DESCRIPTION
Multisensor 3in1 is a battery powered all-in-one motion Door/Window Sensor module detects the opening or
sensor, temperature sensor, and lighting sensor. When the closing of a window or door.
sensor detects motion in front of its viewing window, it will CHARACTERISTICS
send wireless signal to the network. Power supply: 2xCR2450 3.0V 620mAh Lithium Battery
Low battery indication
The sensor can report current temperature, and lighting Operation temperature: -10 ~ 40°C
levels in the immediate vicinity. Operation humidity: 85%RH max
CHARACTERISTICS The device is for indoor use only
Power supply: CR123A lithium battery Distance: up to 30m
Frequency Range: 868.42 MHz Dimensions (WxHxD): 31mm x 70mm x 11.5mm
Operation temperature: -10 ~ 40°C Weight: 23,6 g (without batteries)
Operation humidity: 85%RH max Protection Class: IP 20
Distance: App. 30m indoor Package includes:
Dimensions (WxHxD): 28mm x 96mm x 23mm module, CR2450 batteries (2x), mounting kit.
Weight: 39g
10
SMART PLUG SMART PLUG 16A
DESCRIPTION DESCRIPTION
Smart Plug switches all kinds of loads. Local operation is The Smart Plug 16A controls on/off function for the
possible by pressing the button on the module. Module connected device. It also measures power consumption
measures power consumption. of the connected device according to the principle
of fast sampling of voltage and current signals.
It has also integrated function Auto shut off (when
overloaded) and After black out remember function. A built-in microprocessor calculates energy and power
CHARACTERISTICS from the measured signals. The Smart Plug 16A also acts
Power supply: 230VAC, 50Hz as a Z-Wave repeater to improve the range and stability of
Maximum load: 13A resistive load the Z-Wave network.
Operation temperature: 0 ~ 40°C CHARACTERISTICS
The device is for indoor use only Input voltage: 230V +/- 10% / 50Hz
Distance: up to 30m (indoor) Power load: Max.: 16A resistive (Duration: >
Dimensions (WxHxD): 57.7mm x 94.5mm x 76.6mm 100.000 cycles with resistive load)
Weight: 118 g Overload protection: By STPM32 > 16A
Protection Class: IP 20 Power consumption: < 1 W max
Housing dimensions: 43 x 52 x 75 mm
Housing colour: white
Weight (ex. packaging): ~ 80g
Operating temperature: 0 ÷ +40°C (32 ÷ 104°F);
<80% U.R. non-condensing
Storage operation: -20 ÷ +70°C (-4 ÷ 158°F);
<80% U.R. non-condensing
Plug & Socket type: Plug Type F, Socket
compatible with type C, E and F
11
INDOOR IP CAMERA OUTDOOR IP CAMERA
DESCRIPTION DESCRIPTION
960 HD 1.3 Megapixel, 4 screen support, motion detection HD 1080P 2.0MP WiFi Camera CCTV Surveillance Security
alarm Surveillance Security Indoor Camera. Outdoor Camera.
CHARACTERISTICS CHARACTERISTICS
Lens: 4.2mm 1.3 Megapixel Micro SD size: Support up to 128G TF card (TF card not
Resolution: 1280*960, 640*352, 320*176 included)
Night vision: 8 LRDs. SPK, Etc. Recording type: TF card, support 24 hours continuous recording
PTZ: Horizontal 355, Verticl 120 WIFI Connection: Support
Shape: Cartoon Machine Antenna: 2.4GHz 3dBi antenna
Shape meterilas: Plastic (ABS) Compression format: H.264
Power supply: DC5V 2A Onvif: Support
Voice intercom: support Lens: M12/4.8mm F1.2, 3X digital zoom
Card record: support 64G (MAX) micro SD card Pixel: 2 MegaPixel
CMS record: support Infrared lamp: 3 lattice lamps
Image: brighness, contrast are adjustable IR-CUT filter:Auto switch
Broadband: 2M-4M Recording type: TF card, support 24 hours continuous recording
Network: RJ45 Resulotion: (1280*1080), VGA(640*352),QVGA(320*176)
Item size: 120*96*115mm FLASH: 16M
Package size: 200*150*120mm Talk: Two way audio
Item weight: 280g Microphone: -52dB
Infrared distance: 15M
Power Supply: DC 12V 1A
12
AV CONTROL
DESCRIPTION DESCRIPTION
AV Control is an IR transmitter based on Z-Wave technology.
It is used for sending IR codes to infrared communication
controlling devices such as TV, DVD and TV box.
13
1-PHASE SMART METER Accuracy
Active energy and power
Ordering Code: CKNHTD Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy
Standard EN 62053-23: Class 2
Optical communication
Type: IR - used to control
BICOM432-40-WM1
DESCRIPTION DESCRIPTION
Input (1)
Smart Meter is used for energy measurements in single Rated voltage: 230 V (± 20%)
-phase electrical power network up to 65A. Meters Input resistance: 450 kOhm
measure energy directly in 2-wire networks according Safety
to the principle of fast sampling of voltage and current Indoor meter: yes
signals. A built-in microprocessor calculates energy, power Degree of pollution: 2
and power factor from the measured signals. Protection class: II
AC voltage test: 4 kV
The module can be controlled through Z-wave network Installation Category: 300 Vrms cat. III
and it acts as repeater in order to improve range and Standard: EN 50470
stability of Z-wave network. Ambient conditions and EMC
Ambient conditions and Safety:
CHARACTERISTICS According standards for indoor active energy meters.
Main terminals (LI, NI, Lo, No) Temperature and climatic condition according to EN
Contacts capacity: 1.5 ... 16 (25) mm2 62052-11
Connection screws: M5 Dust/water protection: IP20
Max torque: 3.5 Nm (PZ2) Operation temperature: -10 ... 40°C
Optional terminals (1,2,4,5) Storage temperature: -40 ... 70°C
Contact capacity: 0.05 ... 1 (2.5) mm Enclosure material: self extinguish, complying UL94 V
Screws: M3
Max torque: 0.6 Nm
Indoor meter: yes
Measuring input Degree of pollution: 2
Type (connection): single phase (1b) AC voltage test: 4 kV
Reference current (Iref): 5A Standard: EN 50470
Distance:up to 30 m indoors (depending on building
DESCRIPTION materials)
Maximum current (Imax): 65A Weight: 150g
Minimum current (Imin): 0.25A Starting current: 20 mA Brutto weight (packaging included): 170g
Voltage (Un): 230 V (±20 %) Installation: DIN rail 35mm
Power consumption at Un: < 2W Dimensions (W x H x D): 36 x 90 x 64mm
Nominal frequency (fn): 50 and 60 Hz Package dimensions (W x H x D): 40 x 95 x 80mm
Colour: RAL 7035
14
DESCRIPTION
3-PHASE SMART METER Main terminals: (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO)
Contacts capacity: 2.5 ... 16 (25) mm2
Ordering Code: CKNHXD Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals: (DI, DO)
Contact capacity: 1 ... 2.5 mm2
Screws: M3
Max torque: 1.2 Nm
Measuring input: Type (connection): three phase (4u)
DESCRIPTION DESCRIPTION
Basic current (Ib): 5 A
3-Phase Smart Meter is used for energy measurements in Maximum current (Imax): 80 A
three-phase electrical power network and can be used in Minimum current (Imin): 0.25 A
residential, industrial and utility applications. Starting current: 20 mA
Reference voltage (Un): 3X230V/400V
Meter measure energy directly in 4-wire networks Power consumption at Un: < 8 VA
according to the principle of fast sampling of voltage and Nominal frequency (fn): 50 and 60 Hz
current signals. A built-in microprocessor calculates energy, Accuracy:
power and power factor from the measured signals. Active energy and power:
Standard EN 62053-21: class 1
The module can be controlled through Z-wave network Standard EN 50470-3: class B
and it acts as repeater in order to improve range and Reactive energy:
stability of Z-wave network. It is designed to be mounted Standard EN 62053-23: class 2
on DIN rail. LED:
Colour: red
Pulse rate: 500 imp/kWh
Led on: no load indication
Optical communication:
Type: IR - used to control
BICOM432-40-IR
Input (16): Rated voltage: 230 V (± 20%)
Input resistance: 450 kOhm
LCD:
Display 7+1 digit (100Wh resolution)
Safety:
Indoor Meter: yes
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 Vrms cat. III
Standard: EN 50470
15
IKA232-20/230 V BIOCOM432-40-WM1
DESCRIPTION DESCRIPTION
IKA232-20/230V is accessory of Smart Meter. It is used BICOM432-40-WM1 is accessory of Smart Meter. It is
for switching On or Off the electrical load up to 32A. used for switching On or Off the electrical load up to 32A.
Communication with Smart Meter: over terminals A1 on Communication with Smart Meter: optical (IR)
IKA232-20 and 5 on 1ph Smart Meter or 15 on 3ph Smart communication port.
Meter.
CHARACTERISTICS
CHARACTERISTICS Voltage: 230V ± 10%, 50-60Hz
Voltage: 230V ± 10%, 50-60Hz Current: 32A, 4pole
Current: 32A, 2 pole Operation temperature: -25 ... 55°C (>55 …70 at max. impulse
Operation temperature: -15 ... 55°C duration which is 1min)
Storage temperature: -40 ... 80°C Storage temperature: -30 ... 80°C
Dust/water protection: IP20 Dust/water protection: IP20
Weight: 130g Weight: 250g
Brutto weight (packaging included): 135g Brutto weight (packaging included): 270g
Installation: DIN rail 35mm Installation: DIN rail 35mm
Dimensions (W x H x D): 17,5 x 85 x 60mm Dimensions (W x H x D): 35,2 x 90 x 60mm
Package dimensions (W x H x D): 20 x 95 x 70mm Package dimensions (W x H x D): 40 x 95 x 70mm
Coil consumption: 1.2W Coil consumption: 0.5W
16
MICRO FUSE 5X20 MM FUSE HOLDER 5X20 MM
DESCRIPTION DESCRIPTION
The fuse must be installed in fuse holder: Adels contact Terminal with 5 x 20 mm fuse holder, type Adels-Contact
503 Si/ 1DS. 503 Si/1DS.
CHARACTERISTICS CHARACTERISTICS
Dimensions (WxHxD): 110mm x 93mm x 72mm Dimensions (WxHxD): 330mm x 220mm x 35mm
Gross weight: 1120g Gross weight: 585g
Micro fuse (Ø x L) 5 mm x 20 mm 4A
used for Shutter, Double on/off ESKA 522.723
Micro fuse (Ø x L) 5 mm x 20 mm 5A
used for Shutter DC EKSA 522.724
DESCRIPTION
Micro fuse (Ø x L) 5 mm x 20 mm 10A Digital Temperature Sensor has 1m cable with connector
EKSA 522.727
used for Single on/off, Single on/off D to connect directly to: Dimmer, Shutter, Shutter DC, On/Off,
On/Off D, Double On/Off modules.
CHARACTERISTICS
Digital temperature sensor range is from -50 ~ 125°C. The lenght
of the cable is 1000mm.
17
2M CASING SET WALL MOUNTED CASING
DESCRIPTION DESCRIPTION
DESCRIPTION DESCRIPTION
Temperature sensor can be installed behind this 2M casing Temperature sensor can be installed inside this Wall
SET. It is suitable for mounting on boxes Ø60 with claws. SET mounted casing. The dimmenssions of the Wall mounted
consists of: 1 x cover plate1, 2 x 1M perforated blank cover casing are 71mm x 71mm x 27mm.
and 1 x mounting frame 2M with claws. 2M casing SET is
made of PC/ABS material and comes in 2M dimmenssions. This casings are made from ABS material and are available
2M casing set is available in polar white colour. in white colour.
19
R