2 Select User and press Enter. 4 When user approved, press ESC.
3 Use Navigation buttons to type
password: ←←→→↑↓ and press Enter Atlas Copco Loading and Haulage RCS Load parameter instructions
Parameter Load
5 Navigate to Diagnostics. Select 10 Select Calibrate for Throttle and
Administration and press Enter. press Enter. Insert parameter memory stick into 6 11 Follow the calibration instructions USB port. on the display for: 7 Select Load parameters and press Throttle pedal and Brake pedal. Enter. 12 Calibration finished. Press ESC. (If parameter load fails, try another USB stick).
13 Check pedal function.
Press pedals down 0 to 100%. 8 Load OK. Press ESC x 2.
9 Select Pedals and press
Enter.
14 Press F1 and check that these two
symbols are not visible. If not, return to step 10. 9852 2343 01