Function Core material of table top Veneer types Standards
Flexible, impressive-looking table Lamin board with straight, As a standard, veneers are Palette tables comply with system with options ranging from concealed lipping. Optionally also slip-matched onto the table top. ANSI /BIFMA X 5.5. the single table to complex con edge with bullnose double or The surfaces are sealed with clear ference table system for office, chamfered profile (linkable table lacquer: When placing repeat orders, seminar and conference rooms. edges are only available with a Open-pore: oak, ash, walnut and please indicate whether your Table top forms, lipping and table straight edge). Integrated connect- elm veneer, as well as Wilkhahn table tops have slip-matched leg shapes can be adapted to suit ing mechanism for fixing legs. Mocca veneer. or book-matched veneer. different design concepts. Ideal Closed-pore: maple and for customized conference table Table top group 1 – laminate beech veneer. Adjoining table systems can systems and integrating state-of- Thickness 39 mm (11/2") Bottom of table in beech veneer, be matched up to a maximum the-art information and communi- Laminate according to Wilkhahn mostly colour matched with the ve- length of 270 cm (1061/4“). cations technologies. colour and surface finish samples neer on the top of the table. Some with laminated beech lipping, specific growth features possible. Frame natural oiled finish. Legs in square aluminium profile Table top group 3 – linoleum 100 x 100 mm (37/8“ x 37/8“), Table top group 2 – veneer Table top thickness 40 mm (15/8"). clear anodized (rectangular leg on Table top thickness 39 mm (11/2") Linoleum according to Wilkhahn request) or coated, with four pins Variation 1: linoleum colour samples, laminated and connected with a bayonet Beech veneer according to Wilkhahn beech lipping, natural oiled finish. lock integrated into the table top. woodstain colour samples with Optionally with legs in rectangular laminated beech lipping, as far Single table portal aluminium profile 100 x 35 mm as possible in the same colour as Portal with brushed profile the same (37/8“ x 13/8“) or in round aluminium the veneer, or oak or ash veneer colour and material as the table top tube Ø 65 mm (21/2“) – optionally according to Wilkhahn woodstain on both sides. Aperture with real also bright chrome plated finish colour samples with lipping, as far wood lipping, as far as possible in possible. Base element with adjusta- as possible in the same colour as the same colour as the table top. ble black polyamide glides. the veneer. Hinge can be opened to 180°. Variation 2: Single table portal: Maple, elm or walnut veneer, 350 x 150 mm (133/4" x 57/8") or as well as Wilkhahn veneer Mocca 300 x 150 mm (113/4" x 57/8"). according to the Wilkhahn wood- Linoleum on request. stain colour samples with lipping, as far as possible in the same colour as the veneer.