Professional Documents
Culture Documents
com
A Fdw/1 Fdw/1
Load Bearing
1 & Restraint
Stone Slab
Wall
4
5
6
In this instance the dead load of
the slab is divided by two, as
2 half the weight of the slab is
11
transferred to the load bearing
anchors.
3
Anchor Set
Installation at vertical joints
8
7 Fdw/1 Fdw/1
9
10
Insulation 1- Through Bolt
2- Wedge Washer
3- Anchor Body Restraint
A 4- Lock Washer
Load Bearing
5- Round Washer For Through Bolt
6- Hex Nut for Through Bolt
7- Locking Plate
8- Hex Bolt In this instance the dead load of
Section A-A 9- Adjustable Arm the slab is divided by one, as the
10- Plastic Tube whole weight of the slab is
11- Flanged Pin transferred to the load bearing
anchors.
Installation at horizontal joints Installation Details
Elevation view
TA
A
TA TA TA TA TA TA TA TA
Restraint
TB TB TB TB TB TB TB
TB
TB
TB TB TB TB TB TB TB
AX04 Body Anchor
Load Bearing
TB TB TB TB TB TB TB & Restraint
TC
TB TB TB TB TB TB TB
TC TC TC TC TC TC TC
A TC Load Bearing
Installation at vertical joints
Elevation view
A
TD TD TD TA TA TD
TD
TE TE TE
TD TD TD TB TB
TE
Restraint
TE TE TE
TD TD TD TB TB TE
HSR3 Restraint Anchor
TE TE TE
TD TD TD TB TB
Load Bearing
TE TE TE
TD TD TD TB TB
TE TE TE
TC TC
A
LINK www.link-ltd.com
www.link-ltd.com
LBA
Technical Details
Fdw
For anchoring into
concrete ≥ C20/25
K
Cement
groul
E.b.
LBA 700125
Load
Bearing
LBA 70085
x
LBA 60030
Restraint Ø
EAL
Plastic
tube
St F St=20-50 mm
Fdw
For anchoring into
concrete ≥ C20/25
K
Cement
groul
E.b.
Load
Bearing
x
Fws/Fwp
T M
Ø
Ø
Restraint
EAL
Plastic
tube
St F St=20-50 mm
LINK www.link-ltd.com
www.link-ltd.com
HMPC-HC1H
Technical Profil Sistemi:
Details
Direct fixing in to concrete walls with expansion bolts. Indirect fixing on to sub
channel systems with hex bolts.
Three dimensional adjustability - Quick and easy fixing.
Installation at horizontal and vertical joints.
Optimum static performance and low engineering for higher loads and larger
projection sizes.
AX01 Anchor Recommended projection sizes up to 260 mm and loads up to 1300 N.
± 15 mm
15˚ 15˚
1) Vertical adjustment is provided 2) Adjusting the projection size by 3) Adjusting the anchor left and
AX03 Body Anchor through the body space. The anchor moving the adjustable arm without right is provided by sliding the
is fixed onto the bolt through the rotating. The adjustable arm is safely body up to 15 degrees left or
wedge washer and the lock washer fixed to the anchor body with the lock right.
at the desired level. nut and hex bolt.
Suitable for concrete walls. Anchors are fixed on to concrete walls with expansion bolts.
Projection sizes between 60 and 260 mm and loads up to 1300 N.
In horizontal installation, slabs are pinned on the bottom and upper sides. The anchors act as load bearing, carrying half the weight
of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure.
In vertical installation, slabs are pinned at the left and right sides. The anchors on the bottom are load-bearing anchors carrying the
whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. The anchors on the top
are restraint anchors holding the slabs and restraining against wind suction and pressure.
Three dimensional adjustability allows quick and easy installation.
The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing
can be made for the requirements of the project.
LINK www.link-ltd.com
www.link-ltd.com
Surface Anchor
Technical Details
Profile
Fdw
Cement K
groul
Load S
Bearing
Fwp Ød
T
Restraint EAL
Plastic
tube
St
(20-50mm)
A
Surface
Lock Nut
L
W
Dead Load
Fdw Fdw Fwp
Ød A L W t K
Product Min. Max. Max.
(Acc. to Projection Distance)
Code Projection Projection Wind
30 mm 40 mm 60 mm 80 mm 100 mm Load
mm mm mm mm mm mm N N N N N N
DTM.30010 M.8 9x15 60 35 2 30 50 250 170 - - - 500
DTM.30020 M.10 11x22 70 40 3 40 80 - 370 312 250 - 750
DTM.30030 M.10 13x25 75 40 4 40 80 - 420 362 320 - 820
DTM.30040 M.12 13x25 90 45 6 50 110 - - 590 532 483 1200
T EAL Ø S
Adj.Arm Adj.Arm
Product Profile Surface
Flat Length
Section Lock Nut
Code Thickness Pin Size Bolt
Size
mm mm
LINK www.link-ltd.com
www.link-ltd.com
ZS
Technical Details
Fdw
For anchoring into
concrete ≥ C20/25
Cement
groul K
E.b.
Load
Bearing
Ø
Restraint EAL
Plastic
tube
F
St=20-50 mm
St
Technical Details
Projec- Min. Max. Dead Forming Wind- Wind- Expansion Pin Adj. Arm Adj. Arm Adj. Arm
Product
tion Projec- Projec- Load Size Pressure Suction Bolt Size Size Metric Flat Length
Code
tion tion Size Thickness
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
ZS.27.15.M10 40 35 55 15 60
ZS.27.35.M10 50 45 65 35 60
200 312 219 M8X80 5 M10 3.5
ZS.27.55.M10 70 55 85 55 70
ZS.27.75.M10 90 75 105 75 70
ZS.40.20.M10 55 50 70 20 60
ZS.40.40.M10 75 60 90 40 60
300 468 328 M8X80 5 M10 3.5
ZS.40.60.M10 95 80 105 60 60
ZS.40.80.M10 115 100 125 80 60
ZS.27.15.M12 50 40 65 15 70
ZS.27.35.M12 70 55 85 35 80
400 624 437 M8X80 5 M12 4.5
ZS.27.55.M12 90 75 105 55 80
ZS.27.75.M12 110 95 125 75 80
ZS.40.20.M12 75 60 90 20 80
ZS.40.40.M12 95 80 110 40 80
500 780 546 M8X80 5 M12 4.5
ZS.40.60.M12 115 100 130 60 80
ZS.40.80.M12 135 120 150 80 80
LINK www.link-ltd.com
www.link-ltd.com
A Fdw/1 Fdw/1
Load Bearing
1 & Restraint
Stone Slab
Wall
3
4
5 In this instance the dead load of
9 the slab is divided by two, as
half the weight of the slab is
transferred to the load bearing
anchors.
2
Anchor Set
Installation at vertical joints
6
7
Fdw/1 Fdw/1
8
Insulation
1- Through Bolt
2- Anchor Body
Restraint
A 3- Serrated Washer
4- Round Washer Load Bearing
5- Hex Nut For Through Bolt
6- Hex Nut for Adjustable Arm
7- Adjustable Arm
8- Plastic Tube In this instance the dead load of
Section A-A 9- Flanged Pin the slab is divided by one, as the
whole weight of the slab is
transferred to the load bearing
anchors.
Installation at horizontal joints Installation Details
Elevation view
TA
A
TA
TA TA TA TA TA TA TA
Restraint
TB TB TB TB TB TB TB
TB
TB TB TB TB TB TB TB
HZ02 Z Anchor TB
Load Bearing
TB TB TB TB TB TB TB & Restraint
TC
TB TB TB TB TB TB TB
TC TC TC TC TC TC TC
A TC Load Bearing
Installation at vertical joints
Elevation view
TD
A TD
TD TD TD TA TA
TE TE TE TE
TD TD TD TB TB Restraint
TE TE TE
TE
TD TD TD TB TB
HZ02 Z Anchor
TE TE TE
Load Bearing
TD TD TD TB TB
TE TE TE
TB
TD TD TD TB TB
TE TE TE
TC TC
Load Bearing
A
& Restraint
HRS1 Restraint Anchor
LINK www.link-ltd.com
www.link-ltd.com
HMPC-HC1H
Technical Profil Sistemi:
Details
Direct fixing into concrete walls with expansion bolts. Indirect fixing into sub
channel system with hex bolts
Three dimensional adjustability - Quick and easy fixing
Recommended projection sizes up to 135 mm & loads up to 800 N.
HZ02 Z Anchor
± 10mm
HZ01 Z Anchor
Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.
Recommended projection size between 45 mm to 135 mm and loads up to 800 N.
In horizontal joint installation, slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half the weight
of the slabs above. Anchors also act as restraints, holding the slabs below and restraining against wind suction and pressure.
In vertical joint installation slabs are pinned on the left and right sides. Anchors on the bottom are load-bearing anchors carrying the
whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. Anchors on the top are
restraint anchors holding the slabs and restraining against wind suction and pressure.
Three - dimensional adjustability allows quick and easy installation.
The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing
can be made for the requirements of each project.
LINK www.link-ltd.com
www.link-ltd.com
LBE
Technical Details
Technical Detail
Product Distance
Flat length Flattening Pin Stone
MetricSize
Reveal Size Length between
Code Size Thickness Diameter Thickness
Edge & Hole
M (mm) L (mm) AF (mm) T (mm) ø (mm) St (mm) A (mm)
LBE 51001 8 50 A+6 3 4 20 12-13
LBE 51002 8 60 A+6 3 4 25 14-16
LBE 51003 8 70 A+6 3 4 30 16-17
LBE 51010 10 50 A+8 3.5 5 40 22-24
LBE 51011 10 60 A+8 3.5 5 50 26-29
LBE 51012 10 70 A+8 3.5 5
LBE 51013 10 80 A+8 3.5 5
LBE 51030 12 50 A+8 4.5 5 T
LBE 51031 12 60 A+8 4.5 5
AF
LBE Adjustable Arm LBE 51032
LBE 51033
12
12
70
80
A+8
A+8
4.5
4.5
5
5 A
LBE 51040 14 50 A+8 5.5 6
LBE 51041 14 60 A+8 5.5 6 Ø
LBE 51042 14 70 A+8 5.5 6
LBE 51043 14 80 A+8 5.5 6
LBE 51050 16 50 A+8 6 6
LBE 51051 16 60 A+8 6 6
LBE 51052 16 70 A+8 6 6 L
LBE 51053 16 70 A+8 6 6
Type 2 With welded pin Type 3 With welded plate Type 4 With welded plate&pins Type 5 With welded shim
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4). Material for Plastic Tube: Polyacetal.
LINK www.link-ltd.com