Professional Documents
Culture Documents
Product Catalog
20+
Al
aluminum distributors
Engineering for today’s needs -
years experience
Innovative distributor
engineering - metering
flow with cost effective
Danfoss support in
design and sourcing
2 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog Danfoss Distributor Product Program
Contents Page
DKRCC.PK.FF0.A1.22 / 520H6635 3
Product Catalog RD 3863 Series Copper-Brass Distributor with Brass Piston
Introduction The Danfoss Eliminator-Distributor with the Special Orifice piston allows metered flow
Chatleff Omni-Direct closure is the market in the cooling cycle. In the heating cycle for
leading cost effective distribution solution heat pumps, the refrigerant by-passes the
for HVAC. The Chatleff Omni-Direct Closure metering by flowing around the piston using
allows easy interchange of piston and/ the flutes.
or expansion valve. In use, the Danfoss
yy Chatleff Omni-Direct Closure to insure yy This distributor also designed for use
5 – 10 years of reliability on the with a Thermostatic Expansion Valve
mechanical connection, with (TXV) or Electronic Expansion Valve (EEV)
a replaceable Teflon seal yy Qualified for use with Danfoss
yy Precise metering for Eliminator- TR6 TXV mechanical connection
Distributors, thru the unique piston with long-tail fitting
with teflon seal permitting superior yy Low unit mass reduces tube fatigue
seating during both heat pump and from vibration
cooling cycles obtaining extremely
yy U.L. listed. file No. SA 3449
repeatable and predictable expansion
and distribution from cycle to cycle yy The Danfoss Eliminator-Distributor
is designed to retrofit from piston
yy Designed and engineered to work
expansion to TXV/EEV expansion
with any size system
or vice-versa
yy Piston may be replaced to adjust
flow and pressure drop
Technical Data
Construction Static Pressure
Body: Brass Burst: 2500 psi
Feeder Tubes: Copper Rated Working Pressure: 500 psi
Extruded Brass Max Operating Temp: 450 °F (232 °C)
Piston:
Teflon seated
Refrigerant compatibility
Inlet tube: Copper
R134a, R22,
Nut: Brass Standard
R404A / R507,
refrigerants:
Seal: Teflon R407C, and R410A
4 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 3863 Series Copper-Brass Distributor with Brass Piston
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
Available from 8 – 44 in
Length:
(in increments of 2 in)
C
Fig. D
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 5
Product Catalog RD 3863 Series Aluminum Distributor with Brass Piston
Introduction The Danfoss Eliminator-Distributor with for heat pumps, the refrigerant by-passes
the Chatleff Omni-Direct closure is the the metering by flowing around the piston
market leading cost effective distribution using the flutes. Additionally, the aluminum
solution for HVAC. The Chatleff Omni-Direct alloy eliminates leaks caused by formicary
Closure allows easy interchange of piston corrosion. The Danfoss Aluminum RD 3863
and/or expansion valve.In use, the Danfoss aligns well with the industry trend to convert
Special Orifice piston allows metered flow into all aluminum indoor coils.
in the cooling cycle.In the heating cycle
yy Copper inlet tube for easy field yy Piston may be replaced to adjust flow
connection and service and pressure drop
yy Chatleff Omni-Direct Closure to insure yy This distributor can be used with
5 – 10 years of reliability on the mechanical a Thermostatic Expansion Valve (TXV)
connection, with a replaceable Teflon seal or Electronic Expansion Valve (EEV)
yy Precise metering for Eliminator-Distributors, yy Qualified for use with Danfoss TR6 TXV
thru the unique piston with teflon seal mechanical connection with long-tail fitting.
permitting superior seating during both heat yy Reduced weight compared to the
pump and cooling cycles obtaining extremely Copper-Brass distributors
repeatable and predictable expansion and
yy U.L. listed. file No. SA 3449
distribution from cycle to cycle
yy The Danfoss Eliminator-Distributor is
yy Aluminum Body and feeder tubes to
designed to retrofit from piston expansion
provide excellent resistance against
to TXV/EEV expansion or vice-versa
formicary corrosion (ant nest corrosion)
yy Designed and engineered to work with
any size system
Technical Data
Construction Static Pressure
Body: Aluminum Burst: 2500 psi
Feeder Tubes: Aluminum Rated Working Pressure: 500 psi
Extruded Brass Max Operating Temp: 450 °F (232 °C)
Piston:
Teflon seated
Refrigerant compatibility
Inlet tube: Copper
R134a, R22,
Nut: Brass Standard
R404A / R507,
refrigerants:
Seal: Teflon R407C, and R410A
6 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 3863 Series Aluminum Distributor with Brass Piston
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
B Fig. B
Fig. C
Available from 8 – 44 in
C Length:
(in increments of 2 in)
D Fig. D
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 7
Product Catalog RD 5271 Series TXV Style Copper-Brass Distributor
Introduction The Thermostatic Expansion Valve (TXV) Designed with the Chatleff Omni-Direct
Style Copper-Brass Distributor is designed Closure for easy installation and service
with an industry unique chamber enhancing of TXV’s.
active turbulence and improving even
distribution of two phase refrigerants
to each circuit.
Technical Data
Construction Static Pressure
Body: Brass Burst: 2500 psi
Feeder Tubes: Copper Rated Working Pressure: 500 psi
Threads: UNF 3/4-20 Max Operating Temp: 450 °F (232 °C)
To be used with approved Teflon Seal
Refrigerant compatibility
R134a, R22,
Standard
R404A / R507,
refrigerants:
R407C, and R410A
8 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 5271 Series TXV Style Copper-Brass Distributor
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
A
Inlet option liquid Indicate
Indicate Feeder Tube End Form Choice:
line connection
Choice:
B ODM 3/8 ODF 3/8 Tube Length 0.144 in – straight no end form
3.875 in 3.375 in Long 0.144 in – expanded Bell – 0.310 in OD
3.375 in 3.0 in Medium 0.144 in – brazed on Bell – 0.375 in OD
2.5 in 2.5 in Standard 0.188 in – straight no end form
N/A 1.125 in Short 0.188 in – expanded Bell – 0.310 in OD
Screen option available 0.188 in – expanded Bell – 0.375 in OD
OD – Outside Diameter
Fig. B
C
Distributor Connection
Fig. C
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 9
Product Catalog RD 5271 Series TXV Style Aluminum Distributor
Introduction The RD 5271 Series Thermostatic Expansion Designed with the Chatleff Omni-Direct
Valve (TXV) Style Aluminum Distributor Closure for easy installation and service
is designed with an industry unique of TXV’s.
chamber enhancing active turbulence and
improving even distribution of each circuit.
Technical Data
Construction Static Pressure
Body: Aluminum Burst: 2500 psi
Feeder Tubes: Aluminum Rated Working Pressure: 500 psi
Threads: UNF 3/4-20 Max Operating Temp: 450 °F (232 °C)
To be used with approved Teflon Seal
Refrigerant compatibility
R134a, R22,
Standard
R404A / R507,
refrigerants:
R407C, and R410A
10 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 5271 Series TXV Style Aluminum Distributor
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
A
Inlet option liquid Indicate
Indicate Feeder Tube End Form Choice:
line connection
Choice:
B ODM 3/8 ODF 3/8 Tube Length 0.188 in – expanded Bell – 0.310 in OD
3.875 in 3.375 in Long 0.188 in – expanded Bell – 0.375 in OD
3.375 in 3.0 in Medium 0.188 in – straight no end form
2.5 in 2.5 in Standard OD – Outside Diameter
N/A 1.125 in Short
Filter/strainer option available
Fig. B
C
Distributor Connection
Fig. C
D Available from 8 – 44 in
Length:
(in increments of 2 in)
E
Fig. D
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 11
Product Catalog RD 5500 Series Venturi Style Copper-Brass Distributort
Venturi area
12 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 5500 Series Venturi Style Copper-Brass Distributor
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
Indicate Indicate
Tail Options Length Feeder Tube End Form
Choice: Choice:
C
Fig. C
Available from 8 – 44 in
Length:
(in increments of 2 in)
D
Fig. D
Feeder Tube OD Indicate
– Number of Circuits Choice:
Contact Information:
Company: Phone:
Email:
Address:
Quantity:
Comments:
DKRCC.PK.FF0.A1.22 / 520H6635 13
Product Catalog RD 5500 Series Nozzle Style Distributor
Introduction The Nozzle Style Copper-Brass Distributor The RD 5500 Nozzle series distributor
is designed for brazed connections. can work in conjunction with an external
The nozzle allows for customizing expansion device for metering
of refrigerant flow to provide the desire and distribution of the refrigerant.
performance of the system.
Features RD 5500 Nozzle Style Series RD 5500 Nozzle Style Series Internal detail
Nozzle
14 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 5500 Series Nozzle Style Distributor
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. E
Indicate Feeder Tube ength Indicate Choice:
Tail Options Length
Choice:
0.375 in ODF 2.5 in Available from 8 – 44 in
A Length:
(in increments of 2 in)
0.5 in ODM 2.5 in
0.625 in ODM 2.5 in Fig. F
Fig. B Indicate
Feeder Tube End Form Choice:
B Distributor Body Neck Size Indicate
Option (no inlet tube) Choice: 0.144 in – straight no end form
0.144 in – expanded Bell – 0.310 in OD
C 0.375 in
0.144 in – brazed on Bell – 0.375 in OD
0.500 in
0.157 in – straight no end form
0.625 in
0.157 in – expanded Bell – 0.310 in OD
0.875 in
E
0.188 in – expanded Bell – 0.310 in OD
Fig. C 0.188 in – expanded Bell – 0.375 in OD
Nozzle Indicate Nozzle Indicate 0.188 in – straight no end form
Orifice Size Choice: Orifice Size Choice:
0.250 in – straight no end form
0.099 in 0.199 in
D 0.120 in 0.219 in OD – Outside Diameter
0.141 in 0.221 in
0.157 in 0.242 in
0.172 in 0.266 in
0.180 in 0.281 in
F Fig. D
Feeder Tube OD Indicate
– Number of Circuits Choice:
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 15
Product Catalog RD 6500 Series Hot Gas Bypass Style Distributor
Introduction The Hot Gas Bypass Style Distributor Can be used for heat pump and Hot Gas
is the largest distributor body allowing ByPass applications (HGBP).
up to 22 circuits with 0.144 OD tubing
(other tube size options are available).
Features RD 6500 Hot Gas Bypass Series RD 6500 Hot Gas Bypass Series Piston detail
16 DKRCC.PK.FF0.A1.22 / 520H6635
Product Catalog RD 6500 Series Hot Gas Bypass Style Distributor
Ordering options Please make your selections in the column or space provided
and fax or email your sales representative.
Fig. A Fig. F
Feeder Tube OD Indicate
Inlet Option Liquid Line Indicate Choice:
A – Number of Circuits
Choice:
Body Size Connection Size 0.144 in x 0.028 in Wall – 2 to 22 circuits
0.875 in 0.50 in ODM 0.157 in x 0.028 in Wall – 2 to 18 circuits
1.250 in 0.625 in ODM 0.188 in x 0.028 in Wall – 2 to 18 circuits
1.625 in 0.625 in ODM 0.250 in x 0.028 in Wall – 2 to 8 circuits
B Fig. B Fig. G
Fig. E
Contact Information:
Name Job Title:
Company: Phone:
Email:
Address:
Quantity:
Comments:
Contact your Danfoss sales representative for custom options.
DKRCC.PK.FF0.A1.22 / 520H6635 17
Product Catalog Pistons
DKRCC.PK.FF0.A1.22 / 520H6635 19
www.danfoss.us