2.10 meters in succeeding floors Commands: DLI – DIMLINEAR DAL – DIMALIGNED LAYERSSSSS!!! DAN – DIMANGULAR DRA – DIMRADIUS NAME COLOR LINEWEIGHT DDI – DIMDIAMETER WALL CYAN .50
XL – CONSTRUCTION WINDOW RED .10
RAY – RAY DIMENSION RED .10 TR – TRIM O – OFFSET OTHERS RED .10 CO – COPY FIXTURES YELLOW .20 C – CIRCLE L – LINE FURNITURES YELLOW .20 ML – MULTILINE TEXT GREEN DEFAULT JUSTIFICATION – TOP, BOTTOM & ZERO SCALE *LINETYPE – CONTINUOS (ALL) REC – RECTANGLE AR – ARRAY CHA – CHAMFER (DISTANCE) FOUNDATION PLAN – SKETCH OF THE BASELINE F – FILLET (RADIUS) OF THE ENTIRE BLDG, sometimes called structure Symbols and Arrows must be ARCHITECTURAL SPREAD – made with wide bases placed TICK directly beneath the walls PIER – load is distributed into soil by concrete or steel called PILES NATIONAL BUILDING CODES: SLAB – solid concrete slab is poured directly to footings Rooms for human - 6.00 square meters with at MAT – assembles a mat, spreads over least 2.00 meters dimension the entire area of the bldg. floor Kitchens – 3 square meters with a dimension of T – inverted T 1.50 meters FPUNDATION MEMBERS T&B room – 1.20 square meters with a FOUNDATION WALLS – support the dimension of .90 meters load and transmit the weight of the Main entrance – not less than .90 meters house of the footing (width) not less than 2 meters (height) SECTION FOOTING – distributes the weight of a 1207 bldg. over large area PIERS AND COLUOMN – vertical Bedroom doors – at least .80 meters width members used to support floor systems T&B doors – at least .70 meters width and structure Window openings shall be at least 10% of the KINDS OF FOOTING floor area of the room WALL – supports a wall by extending Rise of the stairs – max of .2 meters along entire length of wall ISOLATED – supports single column Run of stairs – min width of .28 meters COMBINED – supports two column Ceiling Heights – not less than 2.40 meters loads from floor line to ceiling CANTILEVER – strap CONTINUOUS – supports 3 or more More than one-storey house – min of 2.70 columns meters ceiling height (ground floor/first floor), RAFT OR MAT – supports all the wall and column TRAPEZOIDAL – trapezoid shaped, supp 2 column DRILLING – suitable way of determining soil condition by extracting a sample soil TEST PITS – drilled area EXCAVATION – digging of soil SHALLOW EXCAVATION – digging of the soil extends to 1.50 meters DEEP EXCAVATION – more than 4.5 meters in depth BACKFILLING – filling in of the excavated portion after the foundation has been laid out SHEETING & SHORING – temporary support to the ground during excavation