Professional Documents
Culture Documents
RRU3939 Description
RRU3939 Description
Issue 01
Date 2013-12-30
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
1 Introduction.................................................................................................................................... 1
1.1 Appearance ....................................................................................................................................................... 1
1.2 Physical Ports ................................................................................................................................................... 2
1 Introduction
The RRU3939 is an outdoor remote radio unit. It is the RF part of a distributed base station,
powered by a power cabinet, and can be located near the antenna. The RRU3939 performs
modulation, demodulation, data processing, and combination and division of baseband signals
and RF signals. With the Software Defined Radio (SDR) technology, the RRU3939 can
support the GL dual-mode operation through corresponding software configuration.
The RRU3939 has a dual-transmitter and dual-receiver (2T2R) design, which further
improves the output power and the carrier capacity.
The software of the RRU3939 is backward compatible with the MBTS, MBSC, and OSS of
the N-1 and N-2 versions, where N indicates the current version number, for example,
SRAN8.0 in this document. In addition, the software package of the three versions includes
the RRU3939 software components. Therefore, the RRU3939 of SRAN8.0 can be used for
SRAN6.0, SRAN7.0, and SRAN8.0, without affecting KPIs.
1.1 Appearance
Figure 1-1 shows the appearance of the RRU3939.
2 Technical Specifications
2.2 Capacity
Table 2-2 Single-mode capacity
Mode Capacity
GSM Each RRU3939 supports 8 carriers.
LTE Each RRU3939 supports 2 carriers. The LTE bandwidth is 1.4, 3, 5, 10,
15, or 20 MHz.
The receiver sensitivity of GSM, as recommended in 3GPP TS 51.021, is measured at the antenna
connector on condition that the channel rate reaches 13 kbit/s and the Bit Error Rate (BER) is not
higher than 2%.
The receiver sensitivity of LTE, as recommended in 3GPP TS 36.104, is measured under a 5 MHz
channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Table 2-5 and Table 2-6 list the typical output power of the RRU3939.
Table 2-5 Typical output power of the RRU3939 (1800 MHz, single-mode)
1 0 60 60 0
2 0 60 60 0
3 0 30 30 0
4 0 30 30 0
5 0 20 25 0
6 0 20 25 0
7 0 15 20 0
8 0 15 20 0
0 1 (MIMO) 0 0 5/10/15/20
MHz: 2x60
1.4/3 MHz:
2x40
0 2 (MIMO) 0 0 2x30
0 2 (MIMO) 0 0 Carrier 1:
2x20
Carrier 2:
2x40
Table 2-6 Typical output power of the RRU3939 (1800 MHz, GL MSR)
1 1 (MIMO) 40 2x20
1 1 (MIMO) 30 2x30
1 1 (MIMO) 20 2x40
2 1 (MIMO) 40 2x20
2 1 (MIMO) 30 2x30
2 1 (MIMO) 20 2x40
3 1 (MIMO) 20 2x20
Table 2-7 Power consumption of the DBS3900(Ver.D)(-48V) (configured with RRU3939, 1800
MHz)
Item Specifications
Input power –48 V DC, voltage range: –36 V DC to –57 V DC
The RRU3939 can be used in AC power supply scenarios after being configured
with an AC/DC power module. For details, see AC/DC Power Module User Guide.
Item Specifications
Dimensions (H x W x 400 mm x 300 mm x 150 mm (without the housing)
D)
Weight 20 kg (without the housing)
Item Specifications
Quantity of CPRI 2
ports
CPRI port rate 1.25 Gbit/s, 2.5 Gbit/s, or 4.9 Gbit/s
Topology Star, chain, or dual-star
Cascading Levels CPRI MUX: GL: 4
Item Specifications
Operating –40°C to +50°C (with solar radiation)
temperature –40°C to +55°C (without solar radiation)
Relative 5% RH to 100% RH
humidity
Absolute 1 g/m3 to 30 g/m3
humidity
Atmospheric 70 kPa to 106 kPa
pressure
Operating The RRU complies with the following standards:
environment 3GPP TS 45.005
3GPP TS 36.141
3GPP TS 37.141
ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1: "Non-weather
protected locations."
Shockproof NEBS GR63 zone4
protection
Ingress IP65
Protection (IP)
rating