Professional Documents
Culture Documents
[1]
3 a) Recommend any five alloying elements in steel along [5] CO-5 L5
with one predominant characteristic of that element.
(Each alloying element 0.5 marks, characteristic per
alloying element 0.5 marks)
b) Draw Iron-Iron Carbon Phase Diagram and show [5] CO-1 L2
Eutectoid Reaction separately.
(correct Diagram - 3 marks, Eutectoid reactions
2mark)
[2]
6 a) A car is met with an accident due to failure in wheel [6] CO-4 L5
assembly. Refer diagram of wheel assembly in car.
Recommend destructive test and/or non-destructive
test, based on their inherent characteristics for
probable failure of any six components. ( Any 6
components with justification)
b) Evaluate the terms and Show the regions from [6] CO-5 L5
stress strain curve of any ductile material : YS, UTS,
Ductility, Resilience, Toughness, Elastic Limit ( 1
mark for each concept with reference to stress strain
curve)
7 a) Compare Liquid penetrant test and ultrasonic flaw [6] CO-4 L5
detection. (1 mark for each point)
b) In an automobile industry, various hardened steel [6] CO-5 L4
components are manufactured. These hardened
components are required to be tested for hardness
values. Compare and suggest suitable hardness
measuring machine for various components.
Available Components:Gear, Aotomobile tyres,
Machine Bed, Cutting Tools, , Bearing,( 1 mark for
each component)
[3]
b) Select a suitable electron microscope for detecting [6] CO-3 L3
surface topography of a connecting rod with 3 D
structure. Describe the working and principle with a
neat sketch. (Selection of microscope 1 mark, sketch
2 marks, principle 1 mark, construction and working 2
marks)
[4]