CONFIG T.SLG General configuration Access=4 Value = 69
> POW_FDB Power Feedback Value = 1 > WIR_INP Wired input Value = 0 > HEAD_MSR Head measurement Value = 1 > LO_4/20 Opening limiter in 4/20mA Value = 0 > R6 Synchronisation choice by R6 Value = 0 > WIRE_LA Wired LOCAL AUTO control Value = 0 > SV Speed Thresholds Value = 1 > SPC_AUTM SPC autonomous mode enable Value = 0 PID_CNF PID bloc configuration Access=0 Value = 0 > SY_AUTO Automatic synchronisation Value = 0 TAC_CNF TAC bloc configuration Access=4 Value = 2 > FG1 TCTT FG1 measurement on sensor Value = 0 > FG2 AVAI FG2 on sensor available Value = 1 > FG1_LOST FG1 desable lost detection Value = 0 > FG2_LOST FG2 desable lost detection Value = 0 > FR_LOST FR desable lost detection Value = 0 SPT_CFG Speed threshold Access=3 Value = 1 > SP_TH1 Output #1 inverted Value = 1 > SP_TH2 Output #2 inverted Value = 0 > SP_TH3 Output #3 inverted Value = 0 > SP_TH4 Output #4 inverted Value = 0 HED_CNF Head measurement configuration Access=4 Value = 1 > MDB_MSR MODBUS measurement Value = 1 > UP_DOWN Upstream and downstream level Value = 0 SIMUL Simulation mode Access=4 Value = 0 > SIMUL T.SLG in simulation mode Value = 0 > Isolated Simulation réseau isolé Value = 0 GBF_CNF GBF bloc configuration Access=3 Value = 0 > SINUS Sinus Value = 0 > SQUARE Square Value = 0 > TRI Triangle Value = 0 > FG Unit frequency Value = 0 > PI PI bloc Value = 0 > CSC CSC (before dispatching) Value = 0
TO_TPLC Time out of TPLC link (s) Access=3 Value=5.0 (min=0.05,max=60.0) RPM_NOM Turbine RPM at nominal frequency Access=0 Value=300.0 (min=0.0,max=10000.0) RPM_MIN RPM display lowest value (rpm) Access=0 Value=0.0 (min=0.0,max=10000.0) RPM_MAX RPM display highest value (rpm) Access=0 Value=600.0 (min=0.0,max=10000.0) LM_RMPTI LOCAL MANU - Ramp time (s) Access=0 Value=60.0 (min=0.0,max=1499.0) FQ_CPL Freq. coupling threshold (Norm) Access=3 Value=0.9 (min=0.0,max=2.0) Sn_Kd Differential gain Access=0 Value=9.0 (min=0.0,max=10.0) Sync_Kp Prop gain - Synchronisation Access=0 Value=2.0 (min=0.0,max=10.0) Sync_Td Deriv time - Synchronisation(s) Access=0 Value=0.18 (min=0.0,max=10.0) Sync_Ti Integr time - Synchronisat. (s) Access=0 Value=30.0 (min=0.0,max=2500.0) Intd_Kp Prop gain - Interconnected Access=0 Value=5.5 (min=0.0,max=10.0) Intd_Td Deriv time - Interconnected (s) Access=0 Value=0.15 (min=0.0,max=10.0) Intd_Ti Integr time - Interconnected(s) Access=0 Value=14.0 (min=0.0,max=2500.0) Intd_BP Permanent droop - Interconnected Access=0 Value=0.038 (min=0.0,max=0.2) Isol_Kp Prop gain - Isolated Access=0 Value=1.53 (min=0.0,max=10.0) Isol_Td Deriv time - Isolated (s) Access=0 Value=0.53 (min=0.0,max=10.0) Isol_Ti Integr time - Isolated(s) Access=0 Value=4.3 (min=0.0,max=2500.0) Isol_BP Permanent droop - Isolated Access=0 Value=0.053 (min=0.0,max=0.2) Sync_TCF Frequ. setter evolution time (s) Access=0 Value=60.0 (min=1.0,max=2000.0) SpLd_TCF Load setter evolution time (s) Access=0 Value=180.0 (min=1.0,max=2000.0) SpLd_LLM Load setter Low limitation Access=3 Value=-1.0 (min=-1.0,max=1.0) VT_RPAR Sluice evolution time (s) Access=3 Value=50.0 (min=1.0,max=2999.0) LA_POSA Start stop evolution (Norm) Access=3 Value=0.05 (min=0.0,max=1.0) LA_POSF Stop threshold detection (Norm) Access=3 Value=0.01 (min=0.0,max=1.0) CF_PLAG Freq. modification width (Norm) Access=3 Value=0.1 (min=0.05,max=1.0) VT_OMAV Opening in speed no load Access=3 Value=0.0 (min=0.0,max=1.0) RV_TMAV Delay on speed no load (s) Access=3 Value=0.5 (min=0.0,max=5.0) RES_GLI Slide coefficient (s) Access=3 Value=-10.0 (min=-100.0,max=100.0) VT_ITA0 Default insensitivity (Norm) Access=0 Value=0.0 (min=0.0,max=1.0) VT_ITA1 Insensitivity with R4 (Norm) Access=0 Value=0.0 (min=0.0,max=1.0) RV_SEP1 Fast load intak thres. 1(Norm) Access=3 Value=4.0E-4 (min=0.0,max=0.1) RV_SEP2 Fast load intak thres. 2(Norm) Access=3 Value=8.0E-4 (min=0.0,max=0.1) LO_DEM Opening limit on start up Access=0 Value=0.16 (min=0.0,max=1.0) LO_RABT Closing limit opening Access=0 Value=0.15 (min=0.0,max=1.0) LO_RPLI Fallback limit opening Access=0 Value=1.0 (min=0.0,max=1.0) LO_TIM Ramp time of incremental LO (s) Access=3 Value=60.0 (min=5.0,max=500.0) VT_SRA Closing speed threshold (Norm) Access=3 Value=0.75 (min=0.0,max=2.0) VT_PID OL disabling threshold (Norm) Access=3 Value=0.995 (min=0.0,max=2.0) FREQ_REF Frequency main reference (Hz) Access=3 Value=60.0 (min=1.0,max=120.0) FG_TGR FG filter time (s) Access=3 Value=0.1 (min=0.0,max=20.0) FG_PRFQ Freq. threshold prediv. (Norm) Access=3 Value=0.9 (min=0.0,max=2.0) FG2_PRD Measurement number by period Access=3 Value=30.0 (min=1.0,max=200.0) FG2_FRN Sens. freq. at nominal speed(Hz) Access=3 Value=150.0 (min=1.0,max=3500.0) FG_DIFMX Max FG1/2 freq. difference (Hz) Access=3 Value=5.0 (min=0.0,max=50.0) FG_DISC Freq. min discrepancy detect(Hz) Access=3 Value=20.0 (min=0.0,max=100.0) FG_TDEM Speed appearance time delay (s) Access=3 Value=15.0 (min=0.0,max=999999.0) FG_SLDF No speed threshold (Norm) Access=3 Value=0.05 (min=0.0,max=2.0) FR_TGR FR filter time (s) Access=3 Value=0.1 (min=0.0,max=20.0) FG_TFD FG Thres. fault detection (norm) Access=3 Value=0.2 (min=0.0,max=3.0) PW_MAX Max unit power (MW) (max head) Access=0 Value=237.0 (min=0.0010,max=1000.0) IN_PW_TF Power filter time constant (s) Access=0 Value=0.5 (min=0.0,max=20.0) IN_PW_LC Power Input low raw value Access=3 Value=0.0 (min=-1.0,max=2.0) IN_PW_HC Power Input high raw value Access=3 Value=1.0 (min=-1.0,max=2.0) IN_PW_LV Power Input low value (MW) Access=3 Value=-50.0 (min=-1000.0,max=100.0) IN_PW_HV Power Input high value (MW) Access=3 Value=250.0 (min=0.0,max=1000.0) IN_PW_TL Power fail. detect. time lag (s) Access=3 Value=5.0 (min=0.0,max=1000.0) OU_PW_4 Power value for 4mA output (MW) Access=3 Value=-50.0 (min=-1000.0,max=1000.0) OU_PW_20 Power val. for 20mA output (MW) Access=3 Value=250.0 (min=0.0,max=1000.0) PW_LIND Power min indicator scale (MW) Access=3 Value=-50.0 (min=-1000.0,max=100.0) PW_HIND Power max indicator scale(MW) Access=3 Value=250.0 (min=0.0,max=2000.0) LW_TF Pw lim - Closing mov. time (s) Access=3 Value=10.0 (min=1.0,max=200.0) LW_KP Power limiter - Prop. gain Access=3 Value=0.1 (min=0.1,max=10.0) LW_TI Pw lim - Integ. action time (s) Access=3 Value=100.0 (min=0.0,max=2999.0) LW_LIM Power limitation (MW) Access=0 Value=236.0 (min=0.0,max=1000.0) OU_FL_4 Freq. setpoint 4mA out. (Norm) Access=3 Value=0.9 (min=0.0,max=2.0) OU_FL_20 Freq. setpoint 20mA out. (Norm) Access=3 Value=1.1 (min=0.0,max=2.0) OU_LD_4 Load order for 4mA out. (Norm) Access=3 Value=-1.0 (min=-2.0,max=2.0) OU_LD_20 Load order for 20mA out. (Norm) Access=3 Value=1.0 (min=-2.0,max=2.0) OU_LO_4 LO for 4mA output (Norm) Access=3 Value=0.0 (min=-1.0,max=2.0) OU_LO_20 LO for 20mA output (Norm) Access=3 Value=1.0 (min=-1.0,max=2.0) OU_FG_4 Unit freq. for 4mA output (Norm) Access=3 Value=0.0 (min=-1.0,max=2.0) OU_FG_20 Unit freq. for 20mA outpt (Norm) Access=3 Value=2.0 (min=-1.0,max=3.0) OU_FR_4 Grid freq. for 4mA output (Norm) Access=3 Value=0.0 (min=-1.0,max=2.0) OU_FR_20 Grid freq. for 20mA outpt (Norm) Access=3 Value=2.0 (min=-1.0,max=3.0) SV_SD1 Falling threshold SV1 (Norm) Access=3 Value=0.25 (min=0.0,max=3.0) SV_SM1 Rising threshold SV1 (Norm) Access=3 Value=0.3 (min=0.0,max=3.0) SV_SD2 Falling threshold SV2 (Norm) Access=3 Value=0.5 (min=0.0,max=3.0) SV_SM2 Rising threshold SV2 (Norm) Access=3 Value=0.4 (min=0.0,max=3.0) SV_SD3 Falling threshold SV3 (Norm) Access=3 Value=1.51 (min=0.0,max=3.0) SV_SM3 Rising threshold SV3 (Norm) Access=3 Value=1.53 (min=0.0,max=3.0) SV_SD4 Falling threshold SV4 (Norm) Access=3 Value=0.01 (min=0.0,max=3.0) SV_SM4 Rising threshold SV4 (Norm) Access=3 Value=3.0 (min=0.0,max=3.0) FO_1_NB Channel 1 - Test point Id Access=0 Value=1.0 (min=0.0,max=255.0) FO_1_TF Channel 1 - Filter time const(s) Access=0 Value=0.0 (min=0.0,max=1000.0) FO_1_MIN Channel 1 - Min val Access=0 Value=-1.0 (min=-1000.0,max=1000.0) FO_1_MAX Channel 1 - Max val Access=0 Value=1.0 (min=-1000.0,max=1000.0) FO_2_NB Channel 2 - Test point Id Access=0 Value=1.0 (min=0.0,max=255.0) FO_2_TF Channel 2 - Filter time const(s) Access=0 Value=0.0 (min=0.0,max=1000.0) FO_2_MIN Channel 2 - Min val Access=0 Value=-1.0 (min=-1000.0,max=1000.0) FO_2_MAX Channel 2 - Max val Access=0 Value=1.0 (min=-1000.0,max=1000.0) CH_REPLI Head - Fallback value (m) Access=0 Value=327.17 (min=0.0,max=9999.0) CH_LIND Head min indicator scale Access=3 Value=0.0 (min=0.0,max=1000.0) CH_HIND Head max indicator scale Access=3 Value=400.0 (min=0.0,max=1000.0) LW_SCND Conditioning threshold Access=3 Value=0.05 (min=0.0,max=1.0) CS_TCF Compensator evolution time (s) Access=0 Value=30.0 (min=1.0,max=2999.0) CS_POSC Turb - Compensator positioning Access=0 Value=0.0 (min=0.0,max=1.0) PM_POSC Pump - Compensator positioning Access=0 Value=0.0 (min=0.0,max=1.0) VT_TMRI Delay for freq netw isolation Access=0 Value=2.0 (min=0.0,max=1000.0) ISOL_FTH Freq Threshold to isolated netw Access=0 Value=0.1 (min=0.0,max=1.0) ISOL_VAR Freq varaition to isolated netw Access=0 Value=0.1 (min=0.0,max=1.0) ISOL_VTM Time for ISOL_VAR detect (s) Access=0 Value=5.0 (min=1.0,max=7.0) GBF_PER Signal period (s) Access=3 Value=9999.0 (min=1.0,max=9999.9) GBF_MIN Minimal signal value (Norm) Access=3 Value=0.0 (min=-0.1,max=0.1) GBF_MAX Maximal signal value (Norm) Access=3 Value=0.0 (min=-0.1,max=0.1)
LO_RBCH Fallback opening limit. / head Access=0 Lois Parameter Type
> Value : x y x min x max y min y max 0.5 9999.0 0.0 1.0 5.0 0.5 10.0 0.75 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 LO / CH Opening limitation versus head Access=0 Lois Parameter Type > Value : x y x min x max y min y max 0.85 9999.0 0.0 1.0 5.0 0.9 10.0 0.95 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 40.0 1.0 LW_W/CH Power limitation versus head Access=3 Lois Parameter Type > Value : x y x min x max y min y max 0.0 1000.0 10.0 1000.0 20.0 1000.0 30.0 1000.0 40.0 1000.0 40.0 1000.0 40.0 1000.0 40.0 1000.0 40.0 1000.0 40.0 1000.0 PW_O/nW Opening versus nominal power Access=3 Lois Parameter Type > Value : x y x min x max y min y max 0.0 1.0 0.25 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0
SPC01
CONFIG_A SPC Alstom configuration Access=4 Value = 144
> DUAL_CA Dual Can Value = 0 > DIST_VA Distributing valve Value = 0 > SE_RED Servomotor sensor redundancy Value = 0 > VA_RED Valve sensor redundancy Value = 0 > POW_2Q 2Q power output Value = 1 > POW_4Q 4Q power output Value = 0 > POW_MAV mA/V power output Value = 0 > MAN_CTR Manual control Value = 1 CONFIG_B SPC Maintenance configuration Access=3 Value = 0 > KD_INV Actuator control inversion Value = 0 > Value = 0 > SAT_OFF Saturation fault not signalled Value = 0 > SSR_GRAD Fast deviation detection Value = 0 > SSR_DEV Slow deviation detection Value = 0
KP Proportional gain Access=0 Value=20.0 (min=0.0,max=200.0)
TD Derivative time (s) Access=0 Value=0.0 (min=0.0,max=2000.0) TI Integral time (s) Access=0 Value=20.0 (min=0.0,max=200.0) KD Derivative action Access=0 Value=1.0 (min=1.0,max=20.0) RTA Electrical zero Access=0 Value=0.58 (min=-1.0,max=1.0) VA_KP Distr. valve loop - Prop gain Access=0 Value=0.0 (min=0.0,max=200.0) VA_MIN Distr. valve - Min limitation Access=0 Value=-2.0 (min=-2.0,max=0.0) VA_MAX Distr. valve - Max limitation Access=0 Value=2.0 (min=0.0,max=2.0) VA_OSP Distr. valve - Equilib. Pos. Access=0 Value=0.0 (min=-1.0,max=1.0) SE_FILT Servomotor filter constant (s) Access=0 Value=0.0 (min=0.0,max=10.0) SE1_GAI Servomotor sensor 1 - Gain Access=0 Value=1.0161569E-4 (min=-10.0,max=10.0) SE1_OFF Servomotor sensor 1 - Offset Access=0 Value=-0.016664973 (min=-10.0,max=10.0) SE2_GAI Servomotor sensor 2 - Gain Access=0 Value=1.0E-4 (min=-10.0,max=10.0) SE2_OFF Servomotor sensor 2 - Offset Access=0 Value=0.0 (min=-10.0,max=10.0) SE_DISC Servomotor discrep. threshold Access=0 Value=0.01 (min=0.0,max=1.0) VA_FILT Distr. valv filter constant (s) Access=0 Value=0.0 (min=0.0,max=10.0) VA1_GAI Distr. valv sensor 1 - Gain Access=0 Value=2.0E-4 (min=-10.0,max=10.0) VA1_OFF Distr. valv sensor 1 - Offset Access=0 Value=-1.0 (min=-10.0,max=10.0) VA2_GAI Distr. valv sensor 2 - Gain Access=0 Value=2.0E-4 (min=-10.0,max=10.0) VA2_OFF Distr. valv sensor 2 - Offset Access=0 Value=-1.0 (min=-10.0,max=10.0) VA_DISC Distr. valv discrep. threshold Access=0 Value=0.01 (min=0.0,max=1.0) DIT_AMP Dither effect amplitude Access=0 Value=0.25 (min=0.0,max=1.0) TRK_THR Tracking error threshold (alarm) Access=0 Value=0.02 (min=0.0,max=2.0) TRK_TIM Tracking error detect time(s) Access=0 Value=30.0 (min=0.0,max=2000.0) OR_GAIN Servomotor position output- Gai Access=0 Value=10000.0 (min=-10000.0,max=20000.0) OR_OFFS Servomotor posit output-Offset Access=0 Value=0.0 (min=-10000.0,max=10000.0) MAN_RAM Manual control ramp (s) Access=0 Value=60.0 (min=0.0,max=200.0) INT_LIM Integral action limitation Access=0 Value=0.01 (min=0.0,max=1.0) PWM_MIN PWM minimum value Access=0 Value=500.0 (min=500.0,max=9500.0) PWM_MAX PWM maximum value Access=0 Value=9500.0 (min=500.0,max=9500.0) TRK_TRIP Tracking error threshold (trip) Access=0 Value=0.05 (min=0.0,max=1.0) RED_HOLD Max time to hold setpoint (s) Access=0 Value=2000.0 (min=0.0,max=2000.0)
SE_LINE Servomotor sensor linearisation Access=0 Lois Parameter Type
> Value : x y x min x max y min y max 0.0 1.0 0.11665 0.1 0.23616 0.2 0.35505 0.3 0.47469 0.4 0.58602 0.5 0.6856 0.6 0.78021 0.7 0.94076 0.9 0.99512 1.0