Professional Documents
Culture Documents
TELECOM
O
DI C
TIO N A L R A
OR
R T
PORATION
C
N
SRC 155A
NA
PAK AN
Software-select data capacity, modulation type, RF channel frequency, protection mode, output
RF power and test facilities for operator requirements.
By means of the plug-and-play modules make it highly agile and scalable radio. Service providers
can change the system architecture that meets current requirements, and then adapt their
networks to accommodate new applications.
The RF units are placed in ODY (Outdoor Unit) and signal processing unites are placed in IDU
(Indoor Unit). This divided architecture gives very flexible installation and usage features.
SRX 155A system can be managed and monitored by using any SNMP element or network
manager.
Reliability, Quality and Self Reliance
SRC 155A
Point to Point SDH/PDH
Ethernet Digital Radio
Technical Specifications
Key Features Standard ITU-R licensed bands (7, 8, 10.5, 15 and 26 GHz)
Mixed Mode working capability delivers PDH, SDH and/or Ethernet transport over same radio
(16-32-64E1, 1-2-4xE3, STM1-o, Gigabit Ethernet)
Optional data interface cards complaint to IEEE 802.3 & ITU-T G.703 standards
1+0, 1+1 protection with hitless switching feature (frequency and space diversity) and 2+0
working modes are available.
Separate IDU and ODU are connected with single coaxial cable (RG-214) for 1+0, with two
coaxial cables for 1+1 architectures.
Optimization of bandwidth efficiency with selectable modulation type depending on data rate
Installation Indoor Unit(IDU) occupies 2U 19 rack mounting space for 1+0 and 1+1 configurations
Outdoor Unit (ODU) was designed for outdoor installation (weatherproof) but can also be
mounted indoors.
ODU can be attached directly to the antenna up to 6 feet dish diameter.
Others Built-in SNMP based control mechanism enables to reach all radios via order wire channel of link.
This facility helps monitoring and controlling of radios in link
Convenient setup, monitoring and configuration of any radio in the network via built-in graphical
WEB interface and VT-100 terminal program
156 Mbps airlink capacity, within 28 MHz channel bandwidth
Single (or two) 50 ohm coaxial cables(s) between IDU and ODU
Software selectable modulation schemes: QPSK, 16 QAM, 32 QAM, 64 QAM, 128 QAM and 256 QAM
Flexible Forward Error Correction (FEC) schemes optimize RF bandwidth and system gain.
The Automatic Transmit Power Control (ATPC) facility at transmitter
The XPIC mode doubles the pay load capacity (up to 311 Mbps) within same RF Channel
TELECOM
DI
O C
NATIONAL RADIO & www.nrtc.com.pk
TIO N A L R A
OR
R T
PORATION
C
N
TELECOMMUNICATION CORPORATION
NA
PAK AN
IS T Haripur, Pakistan.
Phones: +92-995-666611, 666627 Fax: +92-995-610933 Email: md@nrtc.com.pk, marketing@nrtc.com.pk