Professional Documents
Culture Documents
Coatings
raw material
selection guide
Industrial Coatings Selection Guide
Page 2
About BASF’s Dispersions Depth provides quality, reliability, and Innovation and services
and Pigments Division consistency Through close collaboration with our customers,
The Dispersions & Pigments division advances its Widely integrated in the supply chain from the oil well BASF works to meet their most demanding industry
customers’ formulations, leveraging its industry expertise to the final product, BASF is the Chemical Company. standards. We provide customers with analytical,
and comprehensive portfolio. The division produces Customers benefit from our diverse products and technical, and supply chain services in a broad range of
raw materials such as pigments, resins, additives, capabilities that provide a secure supply of high quality industries to be your coatings solution provider in:
polymer dispersions for adhesives, fiber bonding and products, an advantage hard to find anywhere else. • Furniture and flooring
construction chemicals for the coatings and paints, • General industrial
printing & packaging, construction, adhesives and BASF puts continuous efforts into process • Transportation and automotive
electronic displays industries. In line with the BASF improvements, new processes, and new production • Adhesives and sealants
corporate values, the division fosters innovation and technologies to maintain or further improve our high • Special applications
drives sustainable solutions for the customers and quality. Our customers can simply expect more than the
industries that it serves. For more information about the status quo. BASF and the Transportation and
Dispersions & Pigments division, please visit www.basf. Industrial Coatings group
us/dpsolutions. The global innovation across BASF creates a one-of-a- By bringing all parts of the production process together
kind network to share information and meet customer – from R&D to logistics and servicing – BASF offers
Our commitment demands. With local integration, we are familiar with end-to-end solutions for the transportation and industrial
Substantial investments in the development of new regional needs, and our global network helps find coatings industry from a single source. Whether you
products, testing methods, and new high throughput solutions to local market demands. Our manufacturing need pigments, resins, or additives, we have a complete
screening techniques for customer driven innovations is facilities are located around the globe. and integrated product portfolio for you to choose from.
our commitment to helping our customers succeed.
REACH and GHS Broad technology portfolio
With our broad and unique product portfolio, we aim to As a member in the international Responsible Care1 At BASF, we focus on your needs and offer a depth
meet and exceed the highest market demands. Through initiative and as one of our company’s responsibilities, and breadth of technological knowledge. Our cross-
our innovative excellence and research competence, we BASF is committed to ecological sustainability. In functional teams have expertise in chemistries for
set new standards and market trends. supporting the legislative authorities’ world-wide in coatings, such as:
their efforts to ensure the safety of our environment • Acrylic, aldehyde, acrylate and natural oil-based resins
and human health, we are well prepared for new • Epoxy curing agents
safety standards; BASF has implemented REACH • Polyisocyanates
(Registration, Evaluation and Authorization of Chemicals) • Photoinitiators and light stabilizers
and GHS (Global Harmonized System) guidelines in • Antioxidants and biocides
production and supply chains. Our experts are available • Pigments
to consult with customers and partners implementing
new safety standards.
Additives 35
Chimassorb®, Irgastab®, Lignostab®, and
36
Tinuvin® Stabilizers and UV Absorbers
Irganox® and Irgafos® Antioxidants 41
Irgaguard® and Irgarol® Biocides 42
Tinopal® Optical Brighteners 42
Joncryl Additives 43
Pigments 47
Pigments by Color Space 48
Effect Pigments by Color Space 52
Industrial Coatings Selection Guide
Page 4
Waterborne Systems
Joncryl 67 213 1.1 143 73 Alkali-soluble, high molecular weight resin. Good for pigment chipping and presscake dispersion.
Joncryl 586 108 1.1 115 60 Alkali-soluble, lower acid resin. Recommended as a dispersant in waterborne coatings.
Joncryl 611 53 1.1 112 50 Solvent-soluble, compatible with most resins for fast dry, high gloss, and high solids at low viscosity.
Joncryl HPD 671 214 1.1 173 128 Useful for dispersion of organic pigments and carbon black with good stability.
Joncryl 678 215 1.1 165 85 Alkali-soluble, mid-range molecular weight resin. Recommended as a pigment dispersant in waterborne coatings.
Joncryl 690 240 1.1 155 102 Alkali-soluble, high molecular weight acrylic resin. Excellent efficiency for chip quality aqueous dispersions.
Industrial Coatings Selection Guide
Page 6
Ultra fine particle size, colloidal dispersion for wood penetration and in-can
clarity. Demonstrates minimal grain raising, excellent sandability, and sealing
Joncryl 95 30 100 43 20 8.0 70 1.04 yes no
characteristics. For use in stains, sealers, and wood preservatives. Features
high Tg/low MFFT balance.
Joncryl 1534 49 250 18 12 7.7 15 1.03 yes no Used as a universal primer with excellent resistance properties.
A very hard emulsion often used as a blend vehicle to impart hardness and
Joncryl 1908 48 500 98 100 8.3 55 1.04 yes yes
block resistance. Suitable for wood finishes and hardboard primers.
A cost effective emulsion for use in hardboard primer and cement fiberboard
markets. Offers excellent water resistance, adhesion, and early block
Joncryl 1919 47 1,600 29 19 8.0 60 1.04 no yes
resistance. Adhesion to aluminum. Can be formulated without added solvents
in many applications.
Industrial Coatings Selection Guide
Page 7
A low cost Rheology Controlled acrylic emulsion for waterborne wood clear and
Joncryl 2153 50 700 75 60 8.4 50 1.05 yes yes hardboard primer applications; provides low foam, good adhesion, high gloss,
and fast drying without the use of conventional surfactants.
A versatile emulsion for use in low odor, low VOC gloss paints; or as a modifier
Joncryl 2561 48.5 750 - 11 <5 8.0 50 1.05 yes yes vehicle to improve adhesion, water spot, and block resistant properties. Also
used as a wood stain vehicle.
An ultra fine particle size acrylic emulsion for general and specialty purpose
industrial coatings offering a unique balance of acrylic benefits along with
Joncryl PRO 1537 47 200 46 50 8.6 49 1.03 yes yes
alkyd-like features. It is possible to improve stain resistance, water resistance,
adhesion, and gloss properties when used as a modifier.
Industrial Coatings Selection Guide
Page 8
Self-crosslinking
aqueous acrylic/ One-pack, self-crosslinking emulsion with formulation stability exhibiting excellent chemical
Joncryl 1982 41 250 78 > 70 8.5 17 1.03
styrene resistance and film hardness with lower yellowing. Ideal for wood and plastic applications.
aqueous acrylic/ Self-crosslinking emulsion with formulation stability, exhibiting UV resistance, and film hardness.
Joncryl 1984 41 < 100 78 > 70 8.4 17 1.03
styrene Recommended for concrete and wood applications.
One-pack, self-crosslinking emulsion with good chemical resistance, excellent adhesion, and
aqueous acrylic/
Joncryl 1987 42 200 14 12 8.5 16 1.03 water resistance. Lower VOC requirements to meet regulations while maintaining enhanced
styrene
performance.
Provides a wet-look for patio pavers, stamped concrete, and natural stone. Resists whitening
Joncryl 2970 aqueous acrylic 43 386 5 <5 8.9 – 1.03 even after weeks of continuous water exposure. Provides excellent weatherability while being
50 - 100 g/L VOC capable.
A one-component acrylic emulsion that provides a wet-look appearance for interior and exterior
Joncryl 2980 all acrylic 45 < 300 10 18 9.0 7 1.04
clear and pigmented coatings at 100 g/l VOC.
A one-pack acrylic dispersion that is non-formaldehyde emitting. Offers excellent clarity,
Joncryl 2981 all acrylic 44 < 500 35 45 8.8 9 1.05
weatherability, and excellent chemical resistance for wood coatings.
Soft, self-crosslinking emulsion offering good clarity and “warmth of wood”; good chemical and
aqueous acrylic/
Joncryl 8383 40 95 14 16 8.2 23 1.05 block resistance with excellent water resistance and wet adhesion. Recommended for concrete
styrene
and wood applications.
butyl High standard dispersion for joinery, industrial wood, and concrete applications. Good chemical
Luhydran A 848 S 44 200 – 39 7.0 – 1.05
methacrylate and mechanical resistance.
Specialty
Easy to formulate with excellent block resistance and wet adhesion. Suitable for exterior, clear or
Acronal LR 9014 aqueous acrylic 45 250 – <3 8.0 – 1.04
color wood coatings from medium gloss to high gloss.
Usage as an anti-corrosion primer for medium-duty applications. Exhibits enhanced corrosion
Acronal PRO 80 modified acrylic 50 190 – 22 8.5 – 1.09
resistance along with early rain and humidity resistance properties.
Hydroxyl functional
acrylic/ meth- A crosslinkable emulsion with melamines. High gloss potential with good hardness and
Joncryl 540 44 500 42 2.5 8.5 49 1.04
acrylic/styrene resistance properties. Suitable for thermoset, metal, hardboard, and coil coating applications.
A reactive emulsion for high quality, semi- or high gloss topcoat applications in both clear and
Joncryl OH 8313 acrylic/ styrene 45 360 100 48 2.7 100 1.04 pigmented systems. Appropriate for use in kitchen and bathroom furniture coatings, as well as
exterior wood and metal applications.
acrylic/ meth- APEO-free crosslinkable emulsion for furniture laminates or heat-cure coatings and two-
Luhydran S 938 T 45 25 100 60 2.0 – 1.06
acrylic/styrene component polyurethane interior applications. Hydroxyl value of 100.
Industrial Coatings Selection Guide
Page 9
Solventborne Systems
crosslinked with polyisocyanates such as Basonat® • Joncryl Fast Cure Acrylic Polyols
in 2K PU coatings. High solid Joncryl polyols can
• Joncryl Acrylic Resins
also be used in combination with other binder
chemistries to improve performance at reduced • Laropal® Aldehyde Resins
VOC levels. The outstanding properties of Laroflex®
• Lutonal® Polyvinylether Resins
MP are based on the monomers vinyl chloride and
vinyl isobutyl ether. With the range of Laroflex MP • Laroflex Vinyl Chloride Binders
products, you are sure to find the binder viscosity • Sovermol Natural Oil-based, Solvent-free Polyols
to match your needs. A wide choice of viscosities
means a wide range of applications – coatings
resistant to chemicals, anti-corrosion paints for
iron and steel, protective coatings on non-ferrous
metals, coatings for mineral substrates, gravure inks,
road-marking paints, marine and anti-fouling paints.
Sovermol® polyols have been specially designed for
use in coatings, adhesives, and putty applications.
These natural oil-based, solvent-free polyols help
you comply with environmental legislation while
meeting even the toughest production regulations.
Industrial Coatings Selection Guide
Page 10
Acrylic polyol with good hardness, stain resistance, and pigment dispersibility.
Broad resin compatibility and useful as a low VOC modifier for appliance, office
Joncryl 500 2.3 - 3.8 80 MAK -7 400 140 3,900 1.03 yes
furniture, and general metal coatings. Recommended for high-build maintenance
finishes and other polyurethane coatings.
n-butyl
Joncryl 507 2.8 - 3.8 80 -7 400 140 3,800 1.04 yes Alternate solvent version of Joncryl 500 for non-HAPs applications.
acetate
t-butyl
Joncryl 508 Exempt* 75 -7 400 140 4,000 1.03 no Alternate solvent version of Joncryl 500 for applications using exempt* solvents.
acetate
PM
acetate/
Joncryl 550 4.0 + 62 49 620 90 6,500 1.05 yes Conventional solids polyol. Fast dry with long pot life and good exterior durability.
toluene
(65:35)
Joncryl 551 4.0 + 60 xylene 49 620 90 6,000 1.02 yes Joncryl 550 resin in an alternative, economical solvent.
100% solids polyol used in both two-component urethane and acid-cure coatings
Joncryl 581 4.0 + 100 – 62 360 155 solid 1.16 yes offering good chemical resistance and hardness. Ideal for interior or sheltered
exterior wood and metal applications.
100% solids polyol used in both two-component urethane and acid-cure coatings
offering good chemical resistance and hardness. Improves early hardness
Joncryl 582 3.8 + 100 – 62 360 155 solid 1.16 yes
development in conversion varnishes, and can replace styrene/allyl alcohol co-
polymers.
Conventional solids, “workhorse” polyol. Very fast dry with long pot life and
Joncryl 587 4.0 + 100 – 57 610 92 solid 1.16 yes excellent UV and chemical resistance. Solid form provides cost benefit and
formulator versatility.
Joncryl 587-AC Exempt* 50 acetone 57 610 92 200 0.95 no 50% solids cut of Joncryl 587 in acetone for applications using exempt solvents*.
High equivalent weight for low NCO demand. Can be used to formulate low cost,
Joncryl 804 4.0 + 100 – 70 1,250 45 solid 1.15 yes
two-component urethane coatings.
Excellent exterior durability with good chemical and solvent resistance. Ideal for
Joncryl 901 3.2 - 4.4 77 MAK 20 500 112 17,500 1.07 yes
high performance, lower VOC maintenance, and rail and transportation topcoats.
n-butyl Joncryl 901 resin in an alternate solvent. Recommended for high performance
Joncryl 902 3.2 - 4.4 75 20 500 112 9,000 1.09 yes
acetate maintenance and transportation coatings.
An acrylic polyol for high solids polyurethane coatings with VOC exempt* solvent,
Joncryl 903 Exempt* 60 PCBTF 20 500 112 6,070 1.22 –
fast dry time, and excellent gloss retention.
* Consult Federal EPA, state, and local area regulations regarding status of VOC regulations and exempt solvent listings. Air quality regulations
are not consistent throughout the United States. Consult proper regulatory entities if operating in Canada or Mexico regarding any regulations.
** Additional solvent cuts may be available upon inquiry.
Industrial Coatings Selection Guide
Page 11
Alternate solvent version of Joncryl 906 for applications using exempt* solvents
Joncryl 906-AC Exempt* 75 acetone 16 600 93 6,500 1.07 no
providing excellent weatherability and hardness.
n-butyl
Joncryl 948 3.0 - 4.4 78 9 800 70 13,750 1.04 yes Recommended for polyurethane coatings in industrial maintenance applications.
acetate
Reactive modifiers
acetone/ Acrylic polyol for solventborne 2K polyurethane systems in auto refinish and
Joncryl RPD 950-AC/P 2.1 + 65 PCBTF 27 510 110 3,000 1.03 no general industrial applications; fast cure, early hardness, and long pot life.
(3:1) Supplied in VOC exempt* solvents.
n-butyl Acrylic polyol for solventborne 2K polyurethane systems in auto refinish and
Joncryl RPD 950-B 4.0 + 60.9 27 510 110 4,500 1.01 no
acetate general industrial applications; fast cure, early hardness, and long pot life.
* Consult Federal EPA, state, and local area regulations regarding status of VOC regulations and exempt solvent listings. Air quality regulations
are not consistent throughout the United States. Consult proper regulatory entities if operating in Canada or Mexico regarding any regulations.
Industrial Coatings Selection Guide
Page 12
n-butyl Offers early hardness development and through cure with balanced pot life. Good gloss retention,
Joncryl 909 3.3 - 4.5 68 25 480 117 6,500 1.03
acetate durability, and chemical resistance makes it suitable for automotive and industrial applications.
High performance, high solids polyol for polyurethane coatings. Offers unusually good pot life,
Joncryl 910 3.4 - 4.7 71 MAK 9 600 94 7,000 1.04
Skydrol** resistance, and dry time characteristics with outstanding QUV gloss retention.
Lower VOC, high equivalent weight acrylic polyol for industrial two-component polyurethane
n-butyl
Joncryl 911 3.0 - 4.2 77 7 800 70 7,000 1.05 applications. Good hardness development and durability. Recommended for high-build maintenance
acetate
finishes and other polyurethane coatings.
n-butyl Lower VOC polyol offering fast dry characteristics combined with excellent scratch resistance.
Joncryl 915 3.2 - 4.4 77 13 590 95 7,500 1.04
acetate Supplied in a low odor solvent.
A low VOC polyol offering good dry time and pot life characteristics. Useful as a sole resin or a
Joncryl 920 2.3 - 3.8 80 MAK -7 400 140 6,000 1.03
modifier for other polyols such as Joncryl 910.
n-butyl
Joncryl 922 2.3 - 3.8 80 -7 400 140 5,500 1.05 Alternate solvent version of Joncryl 920 for high performance, low odor applications.
acetate
Joncryl 924 Exempt* 70 PCBTF -7 400 140 6,000 1.16 Alternate solvent version of Joncryl 920 for applications using exempt* solvents.
n-butyl Lower VOC, high equivalent weight acrylic polyol for industrial two-component polyurethane
Joncryl 934 2.9 - 4.0 77 7 800 70 5,000 1.04
acetate applications. Recommended for industrial maintenance finishes.
n-butyl High solids acrylic polyol with exceptionally fast, early, and final hardness development. Suitable for
Joncryl 942 3.0 - 4.2 73.2 26 400 140 7,500 1.05
acetate automotive and industrial applications.
* Consult Federal EPA, state, and local area regulations regarding status of VOC regulations and exempt solvent listings. Air quality regulations are
not consistent throughout the United States. Consult proper regulatory entities if operating in Canada or Mexico regarding any regulations.
** Skydrol is a registered trademark of Solutia Inc.
Industrial Coatings Selection Guide
Page 13
Appearance
Resistance
Resistance
Corrosion
Flexibility
Hardness
Chemical
Acid/ Softening
Hydroxyl Equivalent Molecular Point Tg
Flow
Product Functionality Number Weight Weight (°C) (°C) Chemistry Descriptions
Hydroxyl acrylic
Joncryl 587 hydroxyl 92 610 18,000 110 57 urethane Acrylic polyol designed for UV resistant powder coatings.
Joncryl 804 carboxyl/hydroxyl 15/45 1,250 12,500 105 70 urethane Acrylic polyol designed for UV resistant powder coatings.
Carboxyl acrylic
Joncryl 817 carboxyl 55 1,020 14,000 120 68 hybrid Acrylic resin for 60/40 acrylic hybrid powder coatings.
Joncryl 819/820 carboxyl 75 748 15,000 115 57 hybrid Acrylic resin for 50/50 acrylic hybrid powder coatings.
Joncryl 821/822 carboxyl 70 800 10,500 112 62 hybrid Acrylic resin for 50/50 acrylic hybrid powder coatings.
applies
Industrial Coatings Selection Guide
Page 14
Largely a saponification-resistant
alcohols, esters; soft resin for increasing the adhesion
Lutonal M 40 polyvinyl solution in 50,000 - aromatic and nitrocellulose, and flexibility of coatings and printing
70 <1 0.95 15 11 45 - 55 - 49
70% Ethanol methyl ethanol 250,000 chlorinated natural resins inks. Ideal co-binder in anti-fouling
hydrocarbons paints and heat sensitive blends with
polymer dispersions.
Laroflex MP 15 46 - 48 1.25 40 30
Laroflex MP 45 48 - 52 1.24 44 35
Industrial Coatings Selection Guide
Page 15
A polyol used in combination with other Sovermol types for solvent-free, UV-stable coatings
branched
Sovermol 100 – 100 3.0 880 64 6,000 1.1 for floorings, adhesives, and casting materials with high chemical resistance and hardness;
polyether
increases Tg temperature and crosslinking density.
branched A polyol used in combination with isocyanates as a reactive component for 2-pack polyurethane
1,100
Sovermol 750 polyether/ 65 - 80 100 3.0 315 178 1.0 coatings, floorings, and casting materials; excellent UV, weathering, and chemical resistance
@ 20°C
polyester with HDI isocyanates.
linear A polyol used in combination with other Sovermol types for the production of flexible 2-pack
Sovermol 1052 – 100 2.0 55 1,020 325 1.0
polyether coating and casting materials; less sensitivity to moisture while curing.
branched
A polyol used in combination with isocyanates as a reactive component for 2-component
Sovermol 1080 polyether/ 65 - 80 100 3.5 170 330 3,400 1.0
urethane systems; less sensitivity to moisture while curing.
polyester
branched A high performance polyol used in combination with isocyanates as a reactive component for
Sovermol 1092 polyether/ 65 - 80 100 2.8 283 198 800 1.0 ductile - hard polyurethane coating and casting materials; excellent pigment wetting, very low
polyester viscosity, less sensitivity to moisture while curing, and extremely hydrophobic.
Industrial Coatings Selection Guide
Page 16
Crosslinkers
HDI biuret
Basonat HB 175 MP/X polyisocyanate 75 methoxypropyl acetate/xylene 16 - 17 255 130 - 300 1.07 Offers superior weather and chemical resistance with excellent gloss
retention and light stability. Compatible with a wide range of resins.
Basonat HB 275 B polyisocyanate 75 n-butyl acetate 16 - 17 255 130 - 300 1.06 Recommended for wood, furniture, plastic, and industrial finishes.
Basonat HB 475 B/X polyisocyanate 75 n-butyl acetate/xylene 16 - 17 255 100 - 250 1.06
HDI isocyanurate
Basonat HI 100 polyisocyanate 100 – 21.5 - 22.5 191 2,500 - 4,000 1.17
Basonat HI 2000 polyisocyanate 100 – 22.5 - 23.5 182 900 - 1,500 1.17 Excellent gloss retention and light stability with outstanding weather,
chemical, and abrasion resistance. Recommended for automotive, plastic,
and industrial applications. Basonat HI 2000 is a low viscosity version of
Basonat HI 190 B/S polyisocyanate 90 n-butyl acetate/Solvesso* 100 (1:1) 19.3 - 20.3 212 450 - 650 1.13 Basonat HI 100.
Basonat HI 290 B polyisocyanate 90 n-butyl acetate 19.3 - 20.3 212 400 - 600 1.13
Basonat HW 1000 polyisocyanate 100 – 16.5 - 17.5 247 2,000 - 6,000 1.17
Excellent gloss retention and light stability with outstanding weather and
chemical resistance. Emulsifiable in water with good stability, long pot
Basonat HW 1180 PC polyisocyanate 80 propylene carbonate (Solvenon® PC) 13 - 14 312 450 - 850 1.18
life, and broad formulation latitude. Suitable for automotive, plastic, and
industrial applications.
Basonat HW 2000 polyisocyanate 100 – 17.5 - 18.5 233 1,500 - 3,000 1.16
HDI allophanate
Basonat HA 1000 polyisocyanate 100 – 21 - 23 191 900 - 1,500 1.1 Offers superior lightfast and weather resistance for high solids coatings.
Homogeneous incorporation into polyester emulsions, alkyd resin emulsions,
Basonat HA 2000 polyisocyanate 100 – 18.5 - 21.5 210 500 - 900 1.1 and secondary dispersions. Compatible with a broad range of solvents
permitting adjustments in dry time. Suitable for automotive, wood/furniture,
Basonat HA 3000 polyisocyanate 100 – 19 - 20 215 200 - 400 1.1 plastic, and industrial finishes.
Diisocyanate
A low viscosity, aliphatic diisocyanate designed to react with compounds
0.924 containing hydrogen to form low molecular weight derivatives or specialty
DDI 1410 diisocyanate 100 – 13.6 - 14.4 300 130 @ 25°C
@ 25°C polymers. Non-yellowing in outdoor exposure, low order of toxicity, flexibility
and extensibility, low water sensitivity; solubility in a wide range of solvents.
Diamine
A low pour point, high flash point, liquid diamine that is used as an
Versamine 551 diamine 100 – – – 173 @ 25°C 0.88 @ 25°C
intermediate for polyamides.
A versatile, reactive liquid diamine that reacts with organic diacids to form
Versamine 552 diamine 100 – – – – 0.88 @ 25°C
polyamides.
Polyamidoamine
Polyamide
100
4,000 Semi-solid resin with a long pot life, short tack-free
Versamid 100 84 9 90 525 [with 525 16:00 1:30 48:00 > 25:00 –
@ 120°C times and a high equivalent weight.
EEW epoxy]
167 Isopropanol/toluene solution of a semi-solid, reactive
Versamid 100 IT 60 50 9 55 875 1,200 [with 525 16:00 1:30 48:00 – – polyamide resin with a long pot life, short tack-free
EEW epoxy] times, and a high equivalent weight.
129 n-Propanol solution of a semi-solid, reactive polyamide
1,300
Versamid 100 P77.5 65 9 70 677 [with 525 16:00 1:30 48:00 – – resin with a long pot life, short tack-free time and a high
@ 75 °C
EEW epoxy] equivalent weight.
167 Propylene glycol monomethyl ether and xylene solution
Versamid 100 PMX 60 50 9 54 875 3,100 [with 525 16:00 1:30 48:00 – – of a semi-solid, reactive polyamide resin with a long pot
EEW epoxy] life, short tack-free times and a high equivalent weight.
167 Toluene solution of a semi-solid, reactive polyamide
Versamid 100 T60 50 9 54 875 2,400 [with 525 16:00 1:30 48:00 – – resin with a long pot life, short tack-free times and a
EEW epoxy] high equivalent weight.
154 Xylene solution of a semi-solid, reactive polyamide resin
2,400
Versamid 100 X 65 54 9 59 808 [with 525 16:00 1:30 48:00 – – with a long pot life, short tack-free times and a high
@ 40°C
EEW epoxy] equivalent weight.
High viscosity, reactive resin that provides superior
4,000
Versamid 115 73 8 238 198 104 4:00 4:15 6:00 9:20 62 corrosion resistance and excellent resistance properties
@ 75°C
and adhesion.
1
PHR, part of curing agent per 100 parts of epoxy resin, 190 EEW epoxy.
2
3 wet mils.
* 60% solids in 1-methoxy-2-propanol.
Industrial Coatings Selection Guide
Page 19
Modified amine
Mannich base
Waterborne
Free
Formalde- Sheer Acid Hazen
Type of Etherifying Solids hyde Viscosity Rate Value Density Color Baking Reactivity
Product Resin Alcohol Solvent (wt. %) (max %) (cps) (s-1) (mg KOH/g) (g/cm3) Number Reactivity w/Acids Descriptions and Applications
ethanol/ 3,000 -
Plastopal H 85 EB n-butanol n-butanol 85 - 90 0.3 20.6 <1 1.0 < 100 low medium
6,000
2:1
urea
4,000 - Urea formaldehyde amino resins suitable for solvent-
Plastopal H 73 IB formaldehyde 59 - 62 0.4 20.6 <3 1.0 < 100 high high
7,000 based coatings. Excellent for wood applications.
amino resins
isobutanol isobutanol
1,400 -
Plastopal EBS 400 I 59 - 62 1.0 82.6 <3 1.0 < 50 high high
1,700
Industrial Coatings Selection Guide
Page 23
Laromer® Oligomers
product technology
Weathering
Resistance
Resistance
Resistance
Relative Hydroxyl
Reactivity
Hardness
Chemical
Elasticity
Abrasion
Scratch
Molar Mass Viscosity Value
Diluent Functionality (calculated, @ 23°C (approx.
Laromer* Type of Resin (content) (calculated) g/mol) (cps) mg KOH/g) Descriptions
Epoxy acrylate
LR 8765 R aliphatic 2.0 330 600 - 1,200 330 Partially water-soluble, flexible, and highly reactive.
DPGDA
LR 9023 aromatic 2.4 480 2,000 - 5,000 150 Diluted version of Laromer LR 9019.
(15%)
LR 9019 aromatic 2.4 580 15,000 - 25,000 175 Very highly reactive and resistant to chemicals.
Polyester acrylate
PE 44 F 3.0 940 2,000 - 5,000 80 Free of diluents, low viscosity, low odor, and flexible.
LR 8800 3.0 900 4,000 - 8,000 80 Hard, resistant to chemicals, and low odor.
PE 55 F 3.1 750 25,000 - 45,000 70 Well balanced properties, leads to a tough film.
* All products registered with REACH and TSCA. All other countries, please contact your BASF representative.
superior excellent very good good
Industrial Coatings Selection Guide
Page 25
Laromer® Oligomers
product technology
Weathering
Resistance
Resistance
Resistance
Relative Hydroxyl
Reactivity
Hardness
Chemical
Elasticity
Abrasion
Scratch
Molar Mass Viscosity Value
Diluent Functionality (calculated, @ 23°C (approx.
Laromer* Type of Resin (content) (calculated) g/mol) (cps) mg KOH/g) Descriptions
Urethane acrylate
Polyether acrylate
propoxylated
PO 9102 (2.0) neopentyl 2.0 10 - 20 1 Good substrate and pigment wetting, low viscosity.
glycol diacrylate
LR 8982 2.7 600 150 - 300 70 Partially water-soluble, spray viscosity adjustable.
ethoxylated
LR 8863 3.0 450 50 - 100 10 Low viscosity, low yellowing, and low odor diluent.
TMP-triacrylate
LR 8996 2.9 480 50 - 90 30 High reactivity, very low in color and viscosity.
PO 94 F 3.5 750 300 - 600 55 Very high reactivity and good pigment wetting.
* All products registered with REACH and TSCA. All other countries, please contact your BASF representative.
superior excellent very good good
Industrial Coatings Selection Guide
Page 26
Laromer® Oligomers
product technology
Weathering
Resistance
Resistance
Resistance
Relative Hydroxyl
Reactivity
Hardness
Chemical
Elasticity
Abrasion
Scratch
Molar Mass Viscosity Value
Diluent Functionality (calculated, @ 23°C (approx.
Laromer* Type of Resin (content) (calculated) g/mol) (cps) mg KOH/g) Descriptions
Water based
water
PE 55 WN polyester acrylate 2.2 700 250 - 650 Flexible, easy to matte, well balanced properties.
(50%)
Dual cure
* All products registered with REACH and TSCA. All other countries, please contact your BASF representative.
superior excellent very good good
**Taber is a registered trademark of Taber Industries.
Industrial Coatings Selection Guide
Page 27
Laromer® Oligomers
viscosity - reactivity and hardness - flexibility
These relative comparisons provide a first indication in selecting the right oligomer for
your requirements. Contact your BASF representative for formulation assistance.
Viscosity – reactivity / all products were cured with 1 UV lamp 120 W/cm. Hardness – flexibility / all products were cured 5 x 5 m/min. with 1 UV lamp 120 W/
Photoinitiator: 4% Irgacure® 500 cm. Photoinitiator: 4% Irgacure® 500
viscosity [cps] Erichsen indentation [mm]
1,000,000 10
UA 9072
LR 8983
9
UA 9059
UA 9033
UA 9072
100,000
PE 9079
8
UA 19 T
LR 9013 PE 55 F
UA 19 T PE 56 F
7
UA 9033 PE 9024 LR 9019
10,000 PE 9024
UA 9059
PE 55 WN
LR 8800 LR 8981 PE 56 F
UP 35 D PR 9052 UA 9047 6
LR 8987 PE 55 F
PE 9079
LR 8986 PE 44 F LR 9023
LR 8981 UP 35 D
PO 9026 PE 44 F
PO 77F UA 9095
1,000 5 PO 77 F
LR 8765 R PE 22 WN
LR 9019 UA 9064
PO 9102 WA 9057
PO 94 F LR 8800 LR 9023
LR 8987
PO 43 F 4
PE 9105 LR 8765 R PO 94 F
PE 22 WN PE 55 WN LR 8986
LR 8982 LR 8996
LR 8967 PE 9105
100 LR 8983 UA 9095
PO 43 F
PO 9102
LR 8982
LR 8996 3
LR 8863
LR 8967
WA 9057
2
UA 9064 UA 9047
10
LR 8863
LR 9013
1
PR 9052
PO 9026
1 0
0 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 120 140 160
reactivity [m/min] pendulum hardness [oscillations]
epoxy acrylates polyester acrylates water-based products urethane acrylates polyether acrylates epoxy acrylates polyester acrylates water-based products urethane acrylates polyether acrylates
amine-modified polyether acrylates unsaturated polyester special radiation-curable products amine-modified polyether acrylates unsaturated polyester special radiation-curable products
Industrial Coatings Selection Guide
Page 28
Laromer® Oligomers
product applications
Coatings Adhesion Clear Pigmented
LR 8765 R
LR 9023
LR 8986
LR 9019
Polyester acrylate
PE 9024
PE 44 F
LR 8800
LR 8981
PE 56 F
PE 55 F
PE 9079
PE 9105
UA 9072
UA 9033
UA 19 T
LR 8987
UA 9047
Polyether acrylate
PO 9102
PO 43 F
applies
superior excellent very good good
Industrial Coatings Selection Guide
Page 29
Laromer® Oligomers
Product applications
Coatings Adhesion Clear Pigmented
LR 8982
LR 8863
LR 8996
PO 77 F
PO 94 F
Water based
WA 9057
UA 9064
LR 8983
UA 9059
UA 9095
PE 22 WN
PE 55 WN
PO 9026
LR 9013
UP 35 D
PR 9052
Dual cure
LR 9000
applies
superior excellent very good good
Industrial Coatings Selection Guide
Page 30
Laromer
Laromer®® Oligomers
Reactive Diluents
Product
product applications
technology and applications
Coatings Adhesion Clear Pigmented Inks
Coatings
Overprint Varnish
Corrosion Protection
Abrasion Resistance
Resistance
Transportation
Transportation
Industrial
Furniture
Products
Building
Flooring
Topcoat
Topcoat
General
Primer/
Screen
Plastic
Primer
& Flooring
Molar Level of
Sealer
Industrial
Offset
Inkjet
Adhesion
Metal
Wood
Furniture
Glass
Products
Flexo
Building
Scratch
General
Mass Density Viscosity Stabilizer APHA
Laromer CAS (approx. @ 25°C @ 23°C (ppm Color
Product* Number g/mol) (g/cm3) (cps) MeHQ) (max)
Polyether acrylate (amine-modified, free of monomers)
Laromer PPTTA
LR 8996 (5.0)
Ethoxylated
51728-26-8 530 1.14 < 190 900 ±100 100
Pentaerythritol
Tetra-acrylate
PO 77 F
PO 94 F
Laromer DPGDA
57472-68-1 240 1.05 8 350 ± 50 150
Dipropyleneglycol Diacrylate
Water based
WA 9057
Laromer HDDA
13048-33-4 230 1.02 6 200 ± 50 150
Hexanediol
UA 9064 Diacrylate
LR 8983
Laromer LR 8887
Trimethylpropaneformal
UA 9059 66492-51-1 200 1.09 40 1,000 ±100 200
Mono-acrylate
PE 22 WN
PE 55 WNPOEA
Laromer
48145-04-6 190 1.10 8 200 ± 50 70
Phenoxyethyl Acrylate
UA 9095
LR 9013
Laromer TMPTA
Trimethylolpropane 15625-89-5 300 1.10 130 200 ± 50 70
UP 35 D
Triacrylate
PR 9052
Laromer TPGDA
Tripropyleneglycol
Dual cure 42978-66-5 300 1.04 11 350 ± 50 70
Diacrylate
LR 9000
* All products registered with REACH and TSCA. All other countries, please contact your BASF representative.
applies
applies
superior
superior excellent
excellent verygood
very good good
good
Industrial Coatings Selection Guide
Page 31
Viscosity – reactivity / formulation: 70 parts Laromer® PE 56 F, 30 parts monomer, Hardness – flexibility / formulation: 70 parts Laromer® PE 56 F, 30 parts monomer,
4 parts Irgacure® 500 4 parts Irgacure® 500
viscosity [cps] reactivity [m/min] pendulum hardness Erichsen indentation [mm]
26.0 70 9
24.0
7,000
8
60
22.0
6,000 20.0 7
50
18.0
6
5,000
16.0
40
5
14.0
4,000
12.0
4
30
3,000 10.0
3
8.0
20
2,000
6.0
2
4.0 10
1,000
1
2.0
0 0 0 0
LR 8887
LR 8887
DPGDA
DPGDA
TPGDA
TPGDA
TMPTA
TMPTA
PPTTA
PPTTA
HDDA
HDDA
TBCH
TBCH
POEA
POEA
Industrial Coatings Selection Guide
Page 32
Irgacure® Photoinitiators
product technology and applications
Coatings Specialty
Solubility Wood Top & Top Coats on
Cure UV
(%)
Water-based UV
Laromer® HDDA
Laromer TPGDA
Stabilized Clear
n-Butyl Acetate
Thick Sections
Low Yellowing
Physical Form
Pigmented
Adhesives
Acrylated
Gel Coats
Through
Powder
Surface
Putties
UPES
Clear
Product
applies
co-initiator potential use
Industrial Coatings Selection Guide
Page 33
Irgacure® Photoinitiators
product technology and applications
Coatings Specialty
Solubility Wood Top & Top Coats on
Cure UV
(%)
Water-based UV
Laromer® HDDA
Laromer TPGDA
Stabilized Clear
n-Butyl Acetate
Thick Sections
Low Yellowing
Physical Form
Pigmented
Adhesives
Acrylated
Gel Coats
Through
Powder
Surface
Putties
UPES
Clear
Product
Benzyldimethyl ketal
Benzophenone
Cationic
Metallocene
Phenylglyoxylate
applies
co-initiator potential use
Industrial Coatings Selection Guide
Page 34
Irgacure® Photoinitiators
absorption spectra
Alpha hydroxy ketone photoinitiators
0.001% in acetonitrile
1.2
1.0
0.8
absorbance
0.6
0.4
0.2
0.0
200 220 240 260 280 300 320 340
wavelength [nm]
0.7
0.6
absorbance
0.5
0.4
0.3
0.2
0.1
0
200 220 240 260 280 300 320 340 360 380
wavelength [nm]
2.5 1.0
1.5
2.0 0.8
absorbance
absorbance
absorbance
1.0 0.4
0.5
0.5 0.2
Additives
Cellosolve* Acetate
General Industrial
n-Butyl Acetate /
Ethyl Cellosolve*
Xylene / Methyl
Isobutyl Ketone
Butyl Carbitol* /
Ketone / Methyl
Acetate / Butyl
Transportation
Mineral Spirit /
Furniture and
Ethyl Acetate
Cementitious
Ethyl Ketone
Methyl Amyl
Substrates
Adhesives
Texanol**
Sealants
Flooring
Melting
Toluene
Water
Physical Range
Product Form (°C) Descriptions
(2-hydroxyphenyl)-Benzotriazole
> 50 > 50 > 50 > 50 > 50 > 50 UV absorber that allows efficient protection of light
Tinuvin 99-2 liquid – < 0.01 sensitive substrates.
> 50 > 50 > 50 > 50 > 50 > 50
applies
Note: For EB cure applications, use light stabilizer packages as needed.
For UV cure applications, please contact your BASF representative to assist with photoinitiator and light stabilizer package optimization.
*Cellosolve and Carbitol are trademarks of The Dow Chemical Company.
**Texanol is a trademark of the Eastman Chemical Company.
Industrial Coatings Selection Guide
Page 37
Cellosolve* Acetate
General Industrial
n-Butyl Acetate /
Ethyl Cellosolve*
Xylene / Methyl
Isobutyl Ketone
Butyl Carbitol* /
Ketone / Methyl
Acetate / Butyl
Transportation
Mineral Spirit /
Furniture and
Ethyl Acetate
Cementitious
Ethyl Ketone
Methyl Amyl
Substrates
Adhesives
Texanol**
Sealants
Flooring
Melting
Toluene
Water
Physical Range
Product Form (°C) Descriptions
UV absorber with a very high thermal stability and
> 50 > 50 > 50 > 30 na > 50 environmental permanence for coatings exposed
Tinuvin 384-2 liquid – < 0.01 to high bake cycles or extreme environmental
> 50 > 50 > 50 > 50 > 50 > 30
conditions.
< 0.1 10 4 4.5 < 0.1 na A UV absorber for coatings exposed to high
Tinuvin 900 solid 137 - 141 < 0.01 temperatures or extreme environmental stresses.
24 3 5.5 4 2 < 0.1
UV absorber that provides efficient protection to
> 50 30 > 30 10 high performance coating applications and light
Tinuvin 928 solid 109 - 113 – – < 0.01
na na 30 9.5 sensitive substrates.
na > 50 > 50 > 50 > 50 > 50 A versatile UV absorber with excellent spectral
Tinuvin 1130 liquid – < 0.01
> 50 > 50 > 50 > 50 > 50 > 50 coverage in the UVB and UVA range.
2-Hydroxyphenyl-s-triazine
applies
Note: For EB cure applications, use light stabilizer packages as needed.
For UV cure applications, please contact your BASF representative to assist with photoinitiator and light stabilizer package optimization.
*Cellosolve and Carbitol are trademarks of The Dow Chemical Company.
**Texanol is a trademark of the Eastman Chemical Company.
Industrial Coatings Selection Guide
Page 38
Cellosolve* Acetate
General Industrial
n-Butyl Acetate /
Ethyl Cellosolve*
Xylene / Methyl
Isobutyl Ketone
Butyl Carbitol* /
Ketone / Methyl
Acetate / Butyl
Transportation
Mineral Spirit /
Furniture and
Ethyl Acetate
Cementitious
Ethyl Ketone
Methyl Amyl
Substrates
Adhesives
Texanol**
Sealants
Flooring
Melting
Toluene
Water
Physical Range
Product Form (°C) Descriptions
2-Hydroxy-benzophenone
Blends
applies
Note: For EB cure applications, use light stabilizer packages as needed.
For UV cure applications, please contact your BASF representative to assist with photoinitiator and light stabilizer package optimization.
*Cellosolve and Carbitol are trademarks of The Dow Chemical Company.
**Texanol is a trademark of the Eastman Chemical Company.
Industrial Coatings Selection Guide
Page 39
Cellosolve* Acetate
General Industrial
n-Butyl Acetate /
Ethyl Cellosolve*
Xylene / Methyl
Isobutyl Ketone
Butyl Carbitol* /
Ketone / Methyl
Acetate / Butyl
Transportation
Mineral Spirit /
Furniture and
Ethyl Acetate
Cementitious
Ethyl Ketone
Methyl Amyl
Substrates
Adhesives
Texanol**
Sealants
Flooring
Melting
Toluene
Water
Physical Range
Product Form (°C) Descriptions
Wood photostabilizer
> 20 > 20 > 20 > 20 Wood photostablizing additive for natural and
Lignostab 1198 solid 69 - 71 – – 22 tinted or stained wood.
na na na na
In-can stabilizers
applies
Note: For EB cure applications, use light stabilizer packages as needed.
For UV cure applications, please contact your BASF representative to assist with photoinitiator and light stabilizer package optimization.
*Cellosolve and Carbitol are trademarks of The Dow Chemical Company.
**Texanol is a trademark of the Eastman Chemical Company.
Industrial Coatings Selection Guide
Page 40
absorbance / AU
0.75 0.5
0.5
0.25
0.25
0 0
290 310 330 350 370 390 410 430 290 310 330 350 370 390 410 430
wavelength / nm wavelength / nm
Tinuvin 99-DW Tinuvin 400-DW Tinuvin 477-DW Tinuvin 384-2 Tinuvin 99-2
Tinuvin 928 Tinuvin 1130
2-Hydroxyphenyl-s-triazine Blends
2.5 1.5
spectra were recorded with 20 mg/l in toluene, path = 1 cm spectra were recorded with 40 mg/l in toluene, path = 1 cm
1.25
2.0
1.0
absorbance / AU
absorbance / AU
1.5
0.75
1.0
0.5
0.5
0.25
0 0
290 310 330 350 370 390 410 430 290 310 330 350 370 390 410 430
wavelength / nm wavelength / nm
Tinuvin 400 Tinuvin 405 Tinuvin 5151 Tinuvin 5050 Tinuvin 5060
Tinuvin 460 Tinuvin 477 Tinuvin 479
Tinuvin 5248
Industrial Coatings Selection Guide
Page 41
Hindered phenol
metal
Irganox MD 1024 32687-78-8 solid 553 221 - 232 Primary antioxidants with metal deactivating properties.
deactivator
Phosphite
Blends
phenol/
Irganox B 225 preparation solid mixture > 100 Antioxidants blend for adhesives and sealants applications.
phosphite
applies
Industrial Coatings Selection Guide
Page 42
Molecular Melting
CAS Physical Weight Point Furniture General
Product Number Chemistry Form (g/mol) (°C) and Flooring Industrial Adhesives Sealants Descriptions
silver-glass/
Irgaguard B 6000 – solid – 600 Silver-glass/zeolite based antimicrobial for hygienic coatings.
zeolite
applies
Tinopal®
optical brighteners
Molecular Melting
CAS Weight Range General
Product Number Chemistry Physical Form (g/mol) (°C) Industrial Adhesives Sealants Descriptions
applies
Industrial Coatings Selection Guide
Page 43
Joncryl® Additives
for waterborne coatings
Density
Physical Wax Particle Solids Viscosity supplied Freeze Thaw
Product Form (nm) (wt. %) (cps) pH (g/cm3) Stable Descriptions
opaque Polyethylene wax emulsion imparting excellent mar, scuff, and rub resistance at lower use
Joncryl Wax 4 4,000 40 1,000 9.0 0.92 no
emulsion levels than typical wax emulsions.
translucent Fine particle size wax; improves mar, early block, and water resistance. Normal levels will not
Joncryl Wax 26 53 26 10 9.8 0.98 no
emulsion affect gloss, clarity, or appearance of coating.
hazy
Joncryl Wax 120 93 34 400 9.0 0.97 no Improves mar and scuff resistance. High levels will impart water beading and reduce gloss.
emulsion
aqueous
ammonia Crosslinking agent reacts with free acid groups of polymer. Modification improves early water,
Zinc Oxide Solution #1 - 15 5 11.4 1.21 yes
solution of salt spray, and block resistance of the coating.
zinc ions
Industrial Coatings Selection Guide
Page 44
Empol®
dimer and trimer acids
Dimer Acids
Distilled/Partially Trimer Acids
Undistilled Distilled Distilled/Fully Hydrogenated
Hydrogenated
Empol 1016 Empol 1003 Empol 1026 Empol 1028 Empol 1061 Empol 1062 Empol 1008 Empol 1012 Empol 1043
Feedstock Oleic Acid TOFA TOFA TOFA TOFA TOFA Oleic Acid TOFA TOFA
Acid value AOCS Te 1a-64 194 - 191 192 196 196 194 195 188
Saponification
AOCS TI 1a-64 200 - 199 199 199 200 200 201 198
value
Specific gravity,
AOCS To 1a-64 0.945 0.95 0.951 0.950 0.950 0.949 0.940 0.949 0.964
25/20°C
Flash point, °F/°C ASTM D 92 530/277 455/235 555/291 570/299 570/299 585/307 575/302 580/304 605/318
Fire point, °F/°C ASTM D 92 600/316 - 605/318 644/340 635/335 645/341 630/332 647/342 639/337
Pour point, °F/°C ASTM D 97 5/-15 - 25/-4 28/-2 10/-12 12/-11 5/-15 26/-3 10/-12
Viscosity 100°F, cts 1,800 - 2,600 3,200 2,660 2,700 1,800 2,750 16,500
°C - ASTM D 2196
°F - ASTM D 445 140°F, cts 500 - 620 680 550 600 470 610 2,000
Composition GC % Dimer 80.0 - 79.5 81.0 97.0 96.7 96.0 95.5 10.0
Composition HPLC
% Dibasic 80 - 82 81 94 94 92 94 22
AOCS Tf 5-91
Empol®
dimer and trimer acids
Dimer Acids
Distilled/Partially Trimer Acids
Undistilled Distilled Distilled/Fully Hydrogenated
Hydrogenated
Empol 1016 Empol 1003 Empol 1026 Empol 1028 Empol 1061 Empol 1062 Empol 1008 Empol 1012 Empol 1043
Specification
Acid value AOCS Te 1a-64 190 - 198 > 180 189 - 197 189 - 198 193 - 201 192 - 200 190 - 200 193 - 201 180 - 200
Saponification
AOCS TI 1a-64 195 - 204 - 195 - 204 195 - 204 196 - 203 - 198 - 203 - -
value
% Monobasic - - - - 2.5 - 5.0 1.3 - 5.0 2.0 - 6.0 1.0 - 7.0 6.0 max
Composition HPLC
% Dibasic - - - - 92.5 - 95.5 92.5 - 97.0 - 88.0 - 95.0 40.0 max
AOCS Tf 5-91
% Polybasic - - - - 1.5 - 3.5 0.5 - 3.5 1.0 - 5.0 1.0 - 5.0 60.0 - 90.0
CAS Number 61788-89-4 61788-89-4 61788-89-4 61788-89-4 61788-89-4 61788-89-4 68783-41-5 68783-41-5 68937-90-6
Harmonized number 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000 3824.90.4000
Industrial Coatings Selection Guide
Page 47
Pigments
Pigments
Fastness to
System Weathering
Temperature Stability
Alkali Resistance
Oil Absorption
1/3 Standard
Overcoating
Resistance
Full Shade
(g/100 g)
Powder
Density
Solvent
(g/cm3)
Depth
Water
Color Hiding
Acid
Coil
(°C)
Product Chemistry Index Power
Cromophtal® Yellow L 1060 HD benzimidazolone P.Y. 151 opaque - - 1.48 55 200 5 2-3 5 4 4
Cromophtal® Yellow L 1061 HD benzimidazolone P.Y. 151 opaque - 1.54 50 200 5 3 5 5 4-5
Irgalite® Yellow L 1257 arylamide P.Y. 74 opaque - - - 1.30 37 150 5 4-5 3 4-5 4-5
Irgazin® Yellow L 1030 isoindolinone P.Y. 109 opaque - 1.84 51 200 4-5 5 5 – 3-4
Irgazin® Yellow L 2060 isoindolinone P.Y. 110 transparent 1.78 38 200 5 5 5 – 4-5
Paliotol® Yellow L 0962 HD quinophthalone P.Y. 138 opaque 2.02 30 250 5 5 5 4-5 4
Paliotol® Yellow L 1820 isoindoline P.Y. 139 transparent 1.62 65 200 5 5 4-5 – 3-4
Paliotol® Yellow L 1970 isoindoline P.Y. 139 semi-transparent 1.74 – 200 5 4-5 5 4 3-4
Sicopal® Yellow L 1120 bismuth vanadate P.Y. 184 opaque 6.50 32 200 5 5 5 4-5 4-5
Pigments
Fastness to
System Weathering
Temperature Stability
Alkali Resistance
Oil Absorption
1/3 Standard
Overcoating
Resistance
Full Shade
(g/100 g)
Powder
Density
Solvent
(g/cm3)
Depth
Water
Color Hiding
Acid
Coil
(°C)
Product Chemistry Index Power
Sicotan® Yellow L 1010 Ni/Sb/Ti oxide P.Y. 53 opaque 4.50 14 500 5 5 5 4-5 4-5
Sicotan® Yellow L 1910 Cr/Sb/Ti oxide P.Br. 24 opaque 4.42 14 500 5 5 5 4-5 –
Sicotan® Yellow L 2010 Cr/Sb/Ti oxide P.Br. 24 opaque 4.40 19 500 5 5 5 4-5 –
Sicotan® Yellow L 2110 Cr/Sb/Ti oxide P.Br. 24 opaque 4.30 13 500 5 5 5 4-5 –
diketo-
Irgazin® Orange L 2990 HD P.O. 73 opaque - - 1.30 51 200 5 5 5 5 4-5
pyrrolo-pyrrole
pyrazolo
Paliotol® Orange L 2930 HD P.O. 67 opaque 1.77 – 180 5 5 2 4-5 3
quinazolone
Sicopal® Orange L 2430 Sn/Zn/Ti oxide P.O. 82 opaque 4.90 14 350 5 5 5 4-5 5
Irgalite® Maroon L 4763 BON maroon P.R. 52:2 transparent - - - 1.60 – 150 4 4 5 4 –
Irgalite® Red L 3865 BON arylamide P.R. 112 opaque - - - 1.49 45 160 5 4 1 4 3-4
diketo-
Irgazin® Red L 3551 HD P.R. 255 opaque - 1.40 59 200 5 5 5 4-5 4-5
pyrrolo-pyrrole
diketo-
Irgazin® Red L 3600 HD P.R. 272 opaque - - 1.40 47 200 5 5 5 3-4 –
pyrrolo-pyrrole
diketo-
Irgazin® Red L 3660 HD P.R. 254 opaque 1.60 44 200 5 4-5 5 5 4-5
pyrrolo-pyrrole
Pigments
Fastness to
System Weathering
Temperature Stability
Alkali Resistance
Oil Absorption
1/3 Standard
Overcoating
Resistance
Full Shade
(g/100 g)
Powder
Density
Solvent
(g/cm3)
Depth
Water
Color Hiding
Acid
Coil
(°C)
Product Chemistry Index Power
diketo-
Irgazin® Red L 3670 HD P.R. 254 opaque 1.65 42 200 5 5 5 4-5 4-5
pyrrolo-pyrrole
diketo-
Irgazin® Red L 4010 HD P.R. 264 opaque 1.37 49 200 5 5 5 5 4-5
pyrrolo-pyrrole
diketo-
Irgazin® Rubine L 4025 NA P.R. 264 opaque 1.39 62 200 5 5 5 5 4-5
pyrrolo-pyrrole
diketo-
Irgazin® Scarlet L 3550 HD P.R. 255 opaque 1.41 40 200 5 5 5 5 4-5
pyrrolo-pyrrole
Heliogen® Blue L 6700 F ε-phthalocyanine P.B. 15:6 transparent 1.70 60 350 5 5 4-5 5 5
Heliogen® Blue L 6875 F α-phthalocyanine P.B. 15:2 transparent - - 1.67 30 350 5 5 4-5 5 4-5
Heliogen® Blue L 6905 F α-phthalocyanine P.B. 15:2 transparent - - 1.66 36 300 5 5 4 5 4-5
Heliogen® Blue L 6920 α-phthalocyanine P.B. 15:1 transparent 1.65 – 300 5 5 5 5 4-5
Heliogen® Blue L 7072 D β-phthalocyanine P.B. 15:3 semi-transparent 1.60 – 350 5 5 5 5 4-5
Pigments
Fastness to
System Weathering
Temperature Stability
Alkali Resistance
Oil Absorption
1/3 Standard
Overcoating
Resistance
Full Shade
(g/100 g)
Powder
Density
Solvent
(g/cm3)
Depth
Water
Color Hiding
Acid
Coil
(°C)
Product Chemistry Index Power
Heliogen® Blue L 7081 D β-phthalocyanine P.B. 15:3 semi-transparent 1.61 35 300 5 5 5 5 4-5
Heliogen® Blue L 7085 β-phthalocyanine P.B. 15:3 transparent 1.54 54 300 5 5 5 5 4-5
Heliogen® Blue L 7101 F β-phthalocyanine P.B. 15:4 transparent 1.64 45 300 5 5 4-5 5 4-5
Heliogen® Blue L 7102 F β-phthalocyanine P.B. 15:4 transparent - 1.65 56 200 5 5 5 – 4-5
Sicopal® Black L 0095 chromium iron oxide P.Br. 29 opaque 5.10 20 300 5 5 5 5 5
Effect Pigments
Particle Particle Particle
size size size
Product Exterior Interior (μm) Product Exterior Interior (μm) Product Exterior Interior (μm)
Firemist® Pearl 9G130L 51 - 185 Firemist® Gold 9G230L 52 - 188 Lumina® Copper 9350D 10 - 48
Firemist® Velvet Pearl 9P1301 5 - 90 Lumina® Brass 9232D 10 - 39 Lumina® Exterior Copper 3503D 10 - 48
Glacier™ Exterior Frost White S1303D 8 - 48 Lumina® Exterior Brass 2323D 8 - 48 Mearlin® Sparkle Copper 9350J 10 - 130
Glacier™ Frost White 9S130D 8 - 48 Lumina® Gold 9Y30D 10 - 48 Mearlin® Super Copper 9350Z 6 - 48
Magnapearl® 2100 5 - 25 Mearlin® Sparkle Brass 9222J 10 - 130 Paliocrom® Brilliant Orange L 2850 10 - 38
Magnapearl® 4000 15 - 150 Mearlin® Sparkle Brass 9250J 10 - 130 Paliocrom® Orange L 2800 10 - 38
Magnapearl® Exterior CFS 3103 2 - 10 Mearlin® Sparkle Gold 9220J 10 - 130 Paliocrom® Orange L 2804 10 - 38
Effect Pigments
Particle Particle Particle
size size size
Product Exterior Interior (μm) Product Exterior Interior (μm) Product Exterior Interior (μm)
Lumina® Exterior Red 4303D 10 - 48 Lumina® Aqua Blue 9A30D 10 - 48 Lumina® Exterior Green 8303D 8 - 48
Lumina® Exterior Russet 4503D 8 - 48 Lumina® Exterior Aqua Blue 7303D 10 - 48 Lumina® Green 9G30D 10 - 48
Lumina® Red 9R30D 10 - 48 Lumina® Exterior Red Blue 6303D 10 - 48 Mearlin® Sparkling Green 9820J 10 - 130
Lumina® Russet 9450D 8 - 48 Lumina® Red Blue 9B30D 10 - 48 Mearlin® Super Green 9830Z 6 - 48
Mearlin® Sparkle Russet 9450J 16 - 128 Mearlin® Sparkling Blue 9620J 10 - 130 Metasheen® 41-0310 Dowanol1 PMA
Color space: Violet Lumina® Exterior Turquoise T303D 10 - 48 Metasheen® 71-1110 butyl glycol
Mearlin® Super Violet 9530Z 6 - 48 Lumina® Turquoise 9T30D 10 - 48 Metasheen® 72-1110 butyl glycol
ethyl acetate:isopropyl
Metasheen® 91-0010
acetate
BASF is the world’s leading chemical company: The Chemical Company. Its portfolio ranges from
chemicals, plastics, performance products and crop protection products to oil and gas. We combine
economic success with environmental protection and social responsibility. Through science and innovation,
we enable our customers in nearly every industry to meet the current and future needs of society. Our
products and solutions contribute to conserving resources, ensuring nutrition and improving quality of life.
We have summed up this contribution in our corporate purpose: We create chemistry for a sustainable
future. BASF had sales of about €74 billion in 2013 and over 112,000 employees as of the end of the year.
Further information on BASF is available on the Internet at www.basf.com.
While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, they are
provided for guidance only. Because many factors may affect processing or application/use, BASF recommends that the reader make
tests to determine the suitability of a product for a particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE
REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESCRIPTIONS, DESIGNS,
DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. In no case shall the
descriptions, information, data or designs provided be considered a part of BASF’s terms and conditions of sale. Further, the descriptions,
designs, data and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the descriptions,
designs, data or information given or results obtained, all such being given and accepted at the reader’s risk.
®
= registered trademark of BASF Group.
© 2014 BASF, Southfield, MI 48033. All rights reserved.
BF-9683 rev 03/14