Professional Documents
Culture Documents
Typ UMT 250
Typ UMT 250
See below:
IEC 60127-4 · 250 VAC · 125 VDC · Time-Lag T Approvals and Compliances
Description Applications
- High current range from 80 mA to 10 A - Primary protection on SMD PCBs
- High breaking capacity of 200 A @ 250 VAC (IEC) - Medical Equipment
- UL approval for 277 VAC and 250 VDC - Battery protection
- Impermeable to potting compound used to achieve hermetic seal for References
use in intrinsically safe applications according to ATEx and IECEx re- Packaging Details
quirements. Fuse Kit Fuse Kit UMT 250 / UMZ 250
Unique Selling Proposition Weblinks
- Compact design pdf data sheet, html datasheet, General Product Information, Packaging
- Maximum breaking capacity at minimal footprint details, Distributor-Stock-Check, Detailed request for product, Microsite
- Suitable for pulse-shaped continuous currents
Application Note Primary Protection in Equipmentwith further information on increased Pulse Strength and their test conditions according to inter-
national standards see Impulse Withstand Voltage
Technical Data
Rated Voltage 250 VAC, 125 VDC Soldering Methods Reflow, Wave
Rated current 0.08 - 10 A Soldering Profile
Breaking Capacity 35 A - 200 A Solderability 245 °C / 3 sec acc. to IEC 60068-2-58,
Characteristic Time-Lag T Test Td
Mounting PCB,SMT Resistance to Soldering Heat 260 °C / 40 sec acc. to IPC/JEDEC J-
Admissible Ambient Air Temp. -55 °C to 125 °C STD-020D, 1 cycle
Climatic Category 55/125/21 acc. to IEC 60068-1 Moisture Sensitivity Level MSL 1, J-STD-020
Material: Housing Ceramics Flammability min. UL 94V-1
(acc. to EIA/IS-722, Test 4.12)
Material: Terminals Tin-Plated Copper Alloy
Operational Life MIL-STD-202, Method 108
Unit Weight 0.23 g
(1000h @ 0.42*In @ 70°C)
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Moisture Resistance Test MIL-STD-202, Method 106
Product Marking , Rated current, Voltage, Cha-
(50 cycles in a temp./mister chamber)
racteristic, Breaking Capacity
Mechanical Shock MIL-STD-202, Method 213 Condition A
Resistance to Solvents MIL-STD-202, Method 215
Terminal Strength MIL-STD-202, Method 211A
(Deflection of board 1 mm for 1 minute)
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
Circuit Protection 1
UMT 250 https://www.schurter.com /PG01_2
Fuses
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: UMT 250
Approval Logo Certificates Certification Body Description
METI Approvals METI Japan Electrical Safety and Environment technology Laboratories
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60127-4/2 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and
surface mount types
Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses
Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technology equipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG Universal Modular Fuse meets the standard IEC 60127-4
AEC Automotive SCHURTER AG AEC-Q200 is a test standard for passive components used in automotive
Q200 applications. SCHURTER tests components according to the customer's
agreement and is certified according to IATF 16949.
2 Circuit Protection
Fuses
https://www.schurter.com /PG01_2 UMT 250
3.75
1.6 0.4 1.43
6.5 2
10.1 3
Soldering pads
Pre-Arcing Time
Rated Current In 1.0 x In min. 1.25 x In min. 2.0 x In max. 10.0 x In min. 10.0 x In max.
Time-Current-Curves
10000
80 mA
100 mA
125 mA
160 mA
1000 200 mA
250 mA
315 mA
400 mA
100 500 mA
630 mA
800 mA
1A
1.25 A
10 1.6 A
2A
2.5 A
Time in Seconds
3.15 A
4A
1 5A
0.1
0.01
6.3 A
8A
0.001 10 A
0.0001
0.1 1 10 100
Current in Amperes
All Variants
Rated Cur- Rated Vol- Rated Vol- Breaking Voltage Drop Voltage Drop Power Dissi- Melting I²t Order Number
rent [A] tage [VAC] tage [VDC] Capacity 1.0 In max. 1.0 In typ. pation 1.25 In 10.0 In typ.
[mV] [mV] max [mW] [A²s]
Circuit Protection 3
UMT 250 Fuses
https://www.schurter.com /PG01_2
Rated Cur- Rated Vol- Rated Vol- Breaking Voltage Drop Voltage Drop Power Dissi- Melting I²t Order Number
rent [A] tage [VAC] tage [VDC] Capacity 1.0 In max. 1.0 In typ. pation 1.25 In 10.0 In typ.
[mV] [mV] max [mW] [A²s]
█ Most Popular.
1) UL: 200 A @ 277 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC
2) UL: 200 A @ 277 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC
3) UL: 100 A @ 250 VAC / 100 A @ 125 VDC / 35 A @ 250 VDC / 200 A @ 63 VAC/DC
4 Circuit Protection
Fuses
https://www.schurter.com /PG01_2 UMT 250
Rated Cur- Rated Vol- Rated Vol- Breaking Voltage Drop Voltage Drop Power Dissi- Melting I²t Order Number
rent [A] tage [VAC] tage [VDC] Capacity 1.0 In max. 1.0 In typ. pation 1.25 In 10.0 In typ.
[mV] [mV] max [mW] [A²s]
The 80 mA variant may not be to replace the 80 mA used with gold caps UMT (Au).
16.02.2020
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
Circuit Protection 5
product selected for their own applications.