Professional Documents
Culture Documents
Level 2 Repair
7-1. Disassembly
1 Unscrew 4 points at the REAR case 2 DIsassemble the REAR as from lower side
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
3-1 Separate MIC and Deco. 4 Disassemble PBA, Keypad from Front.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
7-1
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
2) Be careful not to damage LCD and OTP FPCB. 2) Be careful not to twist the LCD while disassembly.
7 Separate OTP from PBA. 8 Disassemble Speaker and Motor from REAR.
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
7. Level 2 Repair
7-2. Assemble
1 Assemble the 3.0M Camera with PBA 2 Stick electric Tape to PBA.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
2) Keep OTP FPCB stick as datum line. 2) Keep LCD not beyond the copper lines on PBA.
7-3
5 Assemble the Shield Can to PBA. 6 Solder the MIC and Receiver.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
2) Make sure Receiver "+" line not cross the green line. 2) Make the Deco hooks connect to Front.
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
7. Level 2 Repair
9 Assemble Speaker and Motor. 10 Assemble REAR with Front as from upper.
7-5