Professional Documents
Culture Documents
Questions
No.
Self Life of Sika Grout 214
a) 04 Month b) 03 Months
c) 06 Months d) 08 Months
which of the following is not a resource identified by the standard?
a) People b) Infrastructure
c) Documents d) Organization knowledge
ISO stands for :
a) International Standardised Organisation b) International Organisation for Standardisation
c) Indian Standardised Organisation d) All of above
MRMs at Site level are conducted by :
a) PM b) CM
c) QMS Co‐ordinator d) MR
Quality Objectives shall be set in such a way that it :
a) Shall be Measurable b) Meets the product Requirements
c) Is in line with Quality Policy d) All of above
Which is a Preventive Action Technique
a) Pareto Analysis b) Cause and Effect Diagram
c) Quality Planning d) Process Capabillity Study
QMS Stands for :
a) Quality Maintained Standards b) Quality Management System
c) Quality Measurable Standards d) All of above
What is meant by TMT ?
a) Thermo Mechanically Tested b) Thermo Mechanically Treated
c) Temperature Maintained Treatment d) Thermostatically Modified Treatment
Training of sub‐contractor's workmen is responsibility of :
a) QC In‐charge b) Execution In‐charge
c) MR d) All
The foundations are placed below ground level, to increase
a) strength b) workability
c) stability of structure d) all the above
Expansion joints in masonry walls are provided if length exceeds
a) 20 b) 30
c) 40 d) 50
In Which of following IS code Related to Hollow Steel Sections for Structural Use.
a) IS808 b) IS2062
c) IS4928 d) IS4923
In Which of following Hollow Section Grade used in our site.
a)Yst 210 b)Yst 240
c)Yst 310 d)Yst 340
PDCA stands for what quality best practice?
a)Please Don’t Change Anything b)Plan‐Do‐Change‐Accountability
c)Plan‐Do ‐Check‐Act d)Planning Drives Careful Action
What is NCR?
a)Non Conformance Report b)No Clearance Required
c)Non Critical Report d)No Customer Reaction
In Which of following IS code Related to High Strength Deformed Steel for Concreting.
a) IS 808 c) IS 405
c) IS 1786 d) IS 2062
In Which of following IS code Related to Foundation bolt.
a) IS 808 c) IS 405
c) IS 1786 d) IS 2062
Intentions and direction of an organization as formally expressed by its top management is called:
a) Vision b) Mission
c) Policy d) Objective
Action to eliminate the cause of a nonconformity and to prevent recurrence" is called :
a) Correction b)Corrective Action
c) Preventive Action d) NonConformity