The document describes three types of drive heads: the Vertical Drive Head GH, which uses an integrated gear box to provide a rotation reduction ratio of 1:4 and is used for high load applications from 20-100hp; the Right Angle Drive Head RH, which has an integrated gear reduction and can use either a combustion or hydraulic motor for very low rod speeds from 20-60hp; and the Vertical Drive Head DH, which is an economical and reliable direct drive option for higher rotations from 20-75hp using pulleys and belts.
The document describes three types of drive heads: the Vertical Drive Head GH, which uses an integrated gear box to provide a rotation reduction ratio of 1:4 and is used for high load applications from 20-100hp; the Right Angle Drive Head RH, which has an integrated gear reduction and can use either a combustion or hydraulic motor for very low rod speeds from 20-60hp; and the Vertical Drive Head DH, which is an economical and reliable direct drive option for higher rotations from 20-75hp using pulleys and belts.
The document describes three types of drive heads: the Vertical Drive Head GH, which uses an integrated gear box to provide a rotation reduction ratio of 1:4 and is used for high load applications from 20-100hp; the Right Angle Drive Head RH, which has an integrated gear reduction and can use either a combustion or hydraulic motor for very low rod speeds from 20-60hp; and the Vertical Drive Head DH, which is an economical and reliable direct drive option for higher rotations from 20-75hp using pulleys and belts.
Vertical Drive Head GH is used espe- Power: 20 to 100 hp
cially for high load (motor power) Speed Range: 60 to 400 rpm The integrated reduction allows a Maximum Torque: 3400 Nm rotation reduction ratio of 1:4. Brake System: Hydraulic Motor Transmission: Gear Box and Pulleys and Belts
Right Angle Drive Head RH
Angle Drive with Gearbox RH – Hollow Shaft
Features Specifications
Angle Drive Head is used especially Power: 20 to 60 hp
for very low polished rod speed Speed Range: 60 to 400 rpm The Drive Head has an integrated Maximum Torque: 2500 Nm gear reduction. Brake System: Hydraulic, Hydraulic The geometry of the Angle Drive Motor or Mechanical Head allows the alternative use of Transmission: Gear Box and Pulleys a combustion motor or hydraulic and Belts motor.
Vertical Drive Head DH
Direct Drive DH – Hollow Shaft
Features Specifications
Economical and reliable. Power: 20 to 75 hp
Used for applications with Speed range: 100 to 500 rpm higher rotations. Maximum Torque: 2000 Nm Brake System: Hydraulic or Hydraulic Motor Transmission: Pulleys and belts