Professional Documents
Culture Documents
most optimal approach to solving of all production and technological problems and as-
suring the lowest handling costs due to following features:
Good maneuverability and smooth ride of Long operating life of trucks is attained due
this series of dump trucks are secured through to use of up-to-date power units, high technical
optimally chosen geometry of truck as a whole, level of components, use of high-strength mate-
and steering system components as well as rials for frame and body manufacturing.
through use of original design pneumohydraulic
suspension.
75306
Engine
Model QSK 60С
Brakes
Meets European safety standards ЕN474-1,
Service brake — disk brake gears for front ЕN474-6.
wheels with four clamps per disk and automatic
clearance adjustment in friction pair. Rear
wheels - disk brake with three gears per disk and
automatic clearance adjustment in friction pair. Cab
Actuation — pneumatic, separate for front and
rear wheels.
Two-seat, two-door, vibro-, heat- and sound-
Parking brake — constantly closed disk brake insulated operator’s cab with ROPS and adjust-
gears on shaft of traction electric motors. Spring able steering column. Cab meets all standard
actuation, pneumatic control. requirements for internal sound levels, vibration,
concentration of poisonous substances and dust.
Emergency brake — parking brake and intact Operator’s seat is pneumatically cushioned and
circuit of service brake are used. has a hydraulic damper. The seat can be adjusted
vertically and longitudinally. The pad and the
Auxiliary brake — electrodynamic braking back of the seat can be adjusted angularly. The
with traction electric motors in alternator mode seat for passenger or probationer is of fold-back
with forced air cooling of brake resistors. type.
Body Frame
Bucket type body is a welded structure, has Frame is a welded structure of high-strength
a protective canopy and is heated by exhaust low-alloyed steel with yield strength of 460 MPa.
gases. It is equipped with a device for mechanical Longitudinal box-section variable height side
locking in raised position and with rock-ejectors. rails are interconnected by cross-members.
Floor and side boards are made of high-strength
wear-resistant steel.
struck 80 92
heaped 2:1 112,4 130
Overall dimensions, m
BELAZ-75306
Series 7530
Cab
Warning system
Fully adjustable operator seat on the pneumatic
Electric horn, braking signal lamps, electric
suspension, three-ply windshield, sliding door
reverse horn, front, rear and side turning
vent, hardened side and rear windows, windshield
indicators, front and rear marker lamps,
wiper and washer, fan and heater, door locks, sun
electrodynamic braking lamps, sound alarm of
visor, rear view mirrors, additional cab heater.
coolant level in front and rear brake circuits,
steering system pressure, clogging of oil and air
filters.
Control lamps
Under our policy of continuous improvement, PPA "Belarusian Autoworks" reserves the right to modify
specifications and design without prior notice.
Distributor
RUPE "Belarusian Autoworks" (BELAZ)
40 let Oktyabrya str. 4, 222160, Zhodino, Republic of Belarus
phone: +375 1775 32782, 32623, 33737
fax: +375 1775 70137
email: office@belaz.minsk.by
www.belaz.minsk.by