Professional Documents
Culture Documents
En38 7 PDF
En38 7 PDF
_______________________________________________________________________________________________
CTX 310 eco
_______________________________________________________________________________________________
DIAGNOSTICS
ALARMS AND MESSAGES
SIEMENS DESCRIZIONE/DESCRIPTION
510216 Cycle turret in progress
510217 I enliven in opening jaws Chuck S4
510218 I enliven in closing jaws Chuck S4
510219 I enliven in opening jaws Chuck S3
510220 I enliven in closing jaws Chuck S3
510221 I stop back movement reader Tailstock
510222 I stop movement reader before Tailstock
510223 Bar change in process
510224 Handshake in process
510225 Block reader through movement steady rest arms
510231 Attended arrest Spindles
700963 Vers.1.0, Date 24.02.2004
700000 F: Channel 1 M function is not admissible
700001 F: Channel 1 M function > 999 is not admissible
700002 F: Channel 1 extended M function is not admissible
700003 F: Channel 1 M function is multiply programmed in block program
700004 F: Channel 2 M function is not admissible
700005 F: Channel 2 M function > 999 is not admissible
700006 F: Channel 2 extended M function is not admissible
700007 F: Channel 2 M function is multiply programmed in block program
700008 F: Channel 3 M function is not admissible
700009 F: Channel 3 M function > 999 is not admissible
700010 F: Channel 3 extended M function is not admissible
700011 F: Channel 3 M function is multiply programmed in block program
700012 F: No clamping pressure on spindle clamp 3
700013 F: Permissible clamping path for spindle clamp 3 exceeded
700014 F: Reserved for clamp
700015 F: Clamping pressure error at additional clamp on spindle 3
700016 F: Clamping path error at additional clamp on spindle 3
700017 F: Clamping path sensor defective at additional clamp 3
700018 F: Pressure fault -second pressure- clamp 3
700019 F: Clamping pressure fault clamp spindle 3
700020 F: 700020 DB2.DBX182.4, reserved for clamp
700021 F: 700021 DB2.DBX182.5, reserved for clamp
700022 F: No clamping pressure on spindle clamp 4
700023 F: Permissible clamping path spindle clamp 4 exceeded
700024 F: Max. time for releasing of the clamping device -Spindle 4
_______________________________________________________________________________________________
CTX 310 eco 7.2
_______________________________________________________________________________________________
700155 M: Chip conveyor Chip conveyor not existing / protection door is open / switch turned off
700156 M: Function: To Frame (Move tool free diagonally)
M: Machine will be switched off within 10 minutes because of a pending malfunction
700157
(RESET)
700158 M: Coolant system: Coil-type suction filter has reached maximum (stop at cycle end)
700159 M: Coolant flow monitoring 20 bar Rev_1
700160 M: Coolant flow monitoring 20 bar Rev_2
700161 M: Coolant flow monitoring 40/80 bar Rev_1
700162 M: Coolant flow monitoring 40/80 bar Rev_2
700163 M: Pneumatic: No pressure on linear measuring system
700200 F: Fault in lubricant circuit 2
700201 F: Fault in lubricant circuit 1
700202 F: Rotational speed monitoring defective
700203 F: Rotational speed monitor has tripped
700204 F: Rotational speed monitoring spindle triggered
700205 F: Axes rotational speed monitoring triggered
700206 F: Pneumatic: no system pressure
700207 F: Loading flap 1 right does not open
700208 F: Loading flap 1 right does not close
700209 F: Loading flap 1 left does not open
700210 F: Loading flap 1 left does not close
700211 F: Auxiliary drive: general fault
700212 F: Mains contactor
700213 F: Protection hood not closed and locked
700214 F: Program running time monitoring exceeded
700215 F: Machine cannot be switched on
700216 F: Machine / Hydraulic has failed
700217 F: Motor overload triggered (Stop at cycle end)
700218 F: Motor overload triggered (immediate stop)
700219 F: Hydraulic filter blocked (stop at cycle end)
700220 F: NC data read/write fault
700221 F: FC21 read/write data fault from NC program
700222 F: Parameter data read/write fault from NC program
700223 F: Unloader not operational
700224 F: Unloader: Workpiece lost in machine
700225 F: Switch cabinet cooling unit: Max temperature exceeded
700226 F: Switch cabinet cooling unit: Filter is blocked
700227 F: Switch cabinet cooling unit is not operational
700228 F: Hydraulic: Minimum level reached (stop at cycle end)
700229 F: Conveyor belt: cover not open
700230 F: Conveyor belt: cover is open
700231 F: Conveyor belt: motor protection switch triggered
700232 M: Coolant level switch defective
700233 M: Excessive coolant level
700234 M: Tool clamp spindle 2 not clamped
700235 M: Tool clamp spindle 2 no clamping pressure
700236 M: Tool clamp spindle 2 clamping pressure applied
_______________________________________________________________________________________________
CTX 310 eco 7.5
_______________________________________________________________________________________________
_______________________________________________________________________________________________
CTX 310 eco 7.19
_______________________________________________________________________________________________
701504 F: Feeding system: Lifting plate feeder not in bottom end position
701505 F: Spoiled proximity Part catcher
701506 F: Function Part catcher not allowed
701507 F: Bar loader: Steady rest, fault when opening
701508 F: Bar loader: Steady rest, fault when closing
701509 F: Bar loader: Steady rest hood not closed
701510 F: Part catcher in indefinite position or old maximum time
701511 F: Position Part catcher again unloaded piece
701512 F: Type loader not selected
701513 F: Attention! the conditions for the zero Turret are not correct.
701514 F: Minimum quantity lubricating system oil level empty, turret 1
701515 F: Minimum quantity lubricating system oil level empty, turret 2
701516 F: Moviment automatique guard max. time execeded
701517 F: Parameters Bar loader modified on the Wizard, but not saved
701518 F: Thermic switch released coolant
701519 F: Thermic switch released conveyor belt material
701520 F: Moviment automatique guard max. time execeded
701521 F: Robot, unmachined part - Gripper: Fault when closing
701522 F: Command not allowed with expeller forward
701523 F: Max. time movement piece exceeded
701524 F: Centre sleeve: Monitoring has responded
701525 F: Centre sleeve: Clamping pressure drop
701526 F: Centre sleeve: Execution time exceeded
701527 F: Centre sleeve: Command not permissible
701528 F: Centre sleeve: Front end position reached.
701529 F: Centre sleeve: Parameter not plausible
701530 F: Centre sleeve: Counter-pressure drop
701531 F: Spindle S4: Alarm excess temperature Inductance L3
701532 M: Position Tailstock not defined. couple/release Tailstock
701533 M: ATTENTION!!!, JOG mode not selected
701534 M: Position steady rest not defined! lock/unlock steady rest
701535 M: Attention!!!, X-axis measure too low
701536 M:
701537 M: Max. time for setting in phase of the turret overcome
701538 M: Max. time paper advanced
701539 M: Paper not advanced control time overcome
701540 M: Thermic motor paper advanced, release
701541 M: Cooler damaged or thermic intervention
701542 M: 701542 DB2.DBX305.2
701543 M: 701543 DB2.DBX305.3
701544 M: 701544 DB2.DBX305.4
701545 M: 701545 DB2.DBX305.5
701546 M: 701546 DB2.DBX305.6
701547 M: 701547 DB2.DBX305.7
701548 M: 701548 DB2.DBX306.0
701549 M: 701549 DB2.DBX306.1
701550 M: 701550 DB2.DBX306.2
_______________________________________________________________________________________________
CTX 310 eco 7.23
_______________________________________________________________________________________________
701634 M: Start cycle not allowed! manual consent missing (open door)
701635 M: Unclamped piece S3!!!, clamp it
701636 M: Filter 1 Coolant obstructed
701637 M: Filter 2 Coolant obstructed
701638 M: Make sure the correct spindle is selected for probe (S3/s4)
701639 M: Lack of oil in the lubricants container steady rest
701640 M: 701640 DB2.DBX313.0 RISERVATO GRAZIANO
701641 M: 701641 DB2.DBX313.1 RISERVATO GRAZIANO
701642 M: 701642 DB2.DBX313.2 RISERVATO GRAZIANO
701643 M: 701643 DB2.DBX313.3 RISERVATO GRAZIANO
701644 M: 701644 DB2.DBX313.4 RISERVATO GRAZIANO
701645 M: 701645 DB2.DBX313.5 RISERVATO GRAZIANO
701646 M: 701646 DB2.DBX313.6 RISERVATO GRAZIANO
701647 M: 701647 DB2.DBX313.7 RISERVATO GRAZIANO
701648 M: Turret in not definite position, to effect zero search (S6/S7)
701649 M: Wrong position tailstock! To effect zero search tailstock
701650 M: Turret in not definite position, to effect zero search
701651 M: Piece unloading on second spindle active
701652 M: Cooling system X-axis not ready
701653 M: Turret in not definite position, to effect zero search (S4/S5)
701654 M: Movement steady rest arms
701655 M: Attention! when you switch the machine on, the door will open
701656 M: Attention!!!, movements in course
701657 M: Hold axes
701658 M: Movement steady rest arms through pedal not allowed
701659 M: Press START to continue
701660 M: Manual command not allowed
701661 M: Wait for activation tailstock thrust
701662 M: Micro collision steady rest/tailstock released
701663 M: Attention!!! resetting in phase of the turret active, locking/unlocking turret
701700 F: Attention! Enclosure, open area
701701 F: Failure movements steady rest arms
701702 F: Failure pressure gauge steady rest arms closed
701703 F: Thermic switch 24V intervened
701704 F: Signal VPM intervened
701705 F: Thermic switch released or failure pressure gauge lubrication rollers steady rest
701706 F: Wrong position of tailstock coupling
701707 F: Tailstock coupling not allowed
701708 F: Steady rest arms in not defined position
701709 F: Quill forward, but not in thrust
701710 F: Condition of manual unlocking/locking steady rest, not allowed
701711 F: Tool change not allowed: Y-axis not in position
701712 F: Steady rest in not defined position
701713 F: Tailstock thrust!Zero point search not allowed
701714 F: Failure turret unit. (visualization code error on page turret)
701715 F: Thermic switch turret intervened
701716 F: Failure on tailstock coupling
_______________________________________________________________________________________________
CTX 310 eco 7.25
_______________________________________________________________________________________________
FUNCTION “M”
SIEMENS DESCRIZIONE/DESCRIPTION
M 000 Stop programs
M 001 Stop programs optional
M 002 End program
M 009 Coolant closing
M 017 End sub-program
M 018 Increase counts video pieces (active only in auto)
_______________________________________________________________________________________________
CTX 310 eco 7.29
_______________________________________________________________________________________________
_______________________________________________________________________________________________
CTX 310 eco 7.30