Professional Documents
Culture Documents
2. A.G. Keyser, K.F. Kunkel and L.A. Snedaker, Impact of rolling emulsion
contaminants on downstream surface quality, Iron and Steel Engineer, September
1998, pp 43-46.
3. A.P. Grudev and A.D. Razmakhnin, Lubricating action of emulsions during cold
rolling, Steel in the USSR, Vol. 15, May 1985, pp 228-230.
5. D.D. Weerstra, Online rolling oil and pickling acid concentration measurement
using ultrasonics, Iron & Steel Engineer, Vol.75, No. 12, December 1998, pp 35-37.
6. F.J. Passman, Biocides for lubricant rancidity and biofouling prevention, Iron and
Steel Engineer, Vol. 74, No. 10, October 1997, pp 41-45.
7. H. Keife and T. Jonsater, Influence of rolling speed upon friction in cold rolling of
foils, J. of Tribology, Vol. 119, No. 2, April 1997, pp 349-357.
10. J.F. Lin, C.C. Chou and S.T. Chen, Models for temperature-kinetic aspect of friction
and wear in oil lubrication, ASME J. of Tribology, Vol. 121, No. 4, October 1999,
pp 774-786.
11. J.F. Lin, T.K. Huang and C.T. Hsu, Evaluation of lubricants for cold strip rolling,
Wear, 147(1), 1991, pp 79-91.
12. J.J. Fitzpatrick and J.G. Lenard, The wear of tool steel rolls during hot rolling of
low carbon steels, I&SM, April 2001, pp 45-49.
13. J.L. Guzman and JM Sech, Stabilized dispersion technology: A new concept in cold
rolling lubrication, Iron and Steel Engineer, May 1998, pp 54-56.
14. J.W. Ledgard, M.E. Yeakle and G.E. Markley, Rolling oil systems for 5-stand
tandem cold mills, Iron and Steel Engineer, March 1996, pp 52-55.
15. K. Chamniprasart, A. Al-Sharif, K.R. Rajgopal and A.Z. Szeri, Lubrication with
binary mixtures: Bubbly oil, ASME J. of Tribology, Vol. 115, April 1993, pp 253-
260.
17. K. Oldridge and C.H. Turner, CPS rolling oils for cold mills, Steel Times
International, September 1992.
18. M. Ranjan, P. Pathak, A.K. Marik, P.P. Sengupta, R.C. Thakur and G.M.D. Murty,
Improvement in lubrication during cold rolling of electrical steel, Proc. of
International Conference of Industrial Tribology, Hyderabad (India), December
1999, pp 273-279.
Bibliography
19. M.L. Das, J. Chattopadhyay and C.V. Chandrasekharan, Studies on the lubricating
performance of synthetic oils for cold rolling of steel, NLGI spokesman, Vol. 62,
No. 11, February 1999, pp 8-13.
20. P. Pathak, A. Pathak, B. Krishna, M.L. Das, R. Bhaskar, and G. Roy, Development
of superior quality rolling oil for a tandem cold mill, Proc. of 4th International
Symposium on Fuels and Lubricants, New Delhi (India), October 2004, pp 39.
21. P. Pathak, A.K. Marik, P.P. Sengupta, D. Sengupta and G.M.D. Murty, Design of
improved strip lubrication and roll cooling systems for enhancing lubricant
performance in cold rolling mills, Steel India, Vol. 25, No. 2, October 2002, pp 40.
22. P. Pathak, M. Ranjan, A.K. Marik, P.P. Sengupta, G.M.D. Murty, and S. Jha,
Improvement in effectiveness of cold rolling lubrication in steel mill, Proc. of 1st
International Symposium on Fuels and Lubricants, New Delhi (India), December
1997, pp 74-79.
23. P. Pathak, M. Ranjan, R.C. Thakur, D. Sengupta and G.M.D. Murty, Performance
evaluation of rolling oil for tandem cold mill of steel plant, Proc. of 9th LAWPSP
Symposium, IIT Bombay (India), February 1995, pp SF7.1-7.8.
24. P. Pathak, P.P. Sengupta, G.K. Sinha, G.M.D. Murty and S. Jha, Influence of process
parameters on cleanliness characteristics of the cold rolling lubricants, Proc. of 2nd
International Symposium on Fuels and Lubricants, New Delhi (India), March 2000,
pp 531-538.
25. P. Pathak, R.C. Thakur, D. Sengupta, G.M.D. Murty and S. Jha, Influence of rolling
oil quality on generation of iron pickup marks over cold rolled strip surface, Proc.
of 3rd International Symposium on Fuels and Lubricants, New Delhi (India),
October 2002, pp 20-21.
26. P. Pathak, R.R. Bhaskar, S. Rath, and M.L. Das, Improvement in performance of a
semi-synthetic rolling oil for cold reversing mill, Proc. of International Conference
Flat Rolling Lubrication
28. P.E. Tabary, M.P.F. Sutcliffe, F. Porral and P. Deneuville, Measurement of friction in
cold metal rolling, ASME J. of Tribology, Vol. 118, July 1996, pp 629-636.
29. P.J. Blau (Ed), Friction, Lubrication, and Wear Technology, ASM Handbook, ASM
International, The Materials Information Society, Vol. 18.
30. P.M. Lugt and W.E. ten Napel, The influence of elastic deformation of the roll and
the sheet in a hydrodynamically lubricated cold rolling process, ASME J. of
Tribology, Vol. 117, July 1995, pp 468-475.
31. P.P. Sengupta, P. Pathak, G.M.D. Murty, S. Jha and S.D. Laskari, Development of a
superior rolling oil for cold reversing mill of Rourkela Steel Plant, Iron & Steel
Review, July 2001, pp 31-38.
32. S. Bair and W.O. Winer, The high pressure high shear stress rheology of liquid
lubricants, ASME J. of Tribology, Vol. 114, January 1992, pp 1-13.
33. S. Bair, F. Qureshi and W.O. Winer, Observations of shear localisation in liquid
lubricants under pressure, ASME J. of Tribology, Vol. 115, July 1993, pp 507-514.
34. S.D. Henery (Ed.), ASM Handbook on Friction, Lubrication and Wear Technology,
ASM International, The Materials Information Society, Vol. 18, pp 139-149.
35. S.H. Wang, A. Al-Sharif, K.R. Rajgopal and A.Z. Szeri, Lubrication with binary
mixtures: Liquid-liquid emulsion in an EHL conjunction, ASME J. of Tribology,
Vol. 115, July 1993, pp 515-522.
36. S.H. Wang, A.Z. Szeri and K.R. Rajgopal, Lubrication with emulsion in cold rolling,
Bibliography
37. Sy-Wei Lo and Tzu-Chern Horng, Lubricant permeation from micro oil pits under
intimate contact condition, ASME J. of Tribology, Vol. 121, No. 4, October 1999,
pp 633-638.
39. T. Matsunaga, S. Ban, S. Itoh, D.M. McArtin and Y. Inoue, US/Japanese team
devises a new rolling oil for Kakogawa Works, 33 Metal Producing, April 1978, pp
54-57.
41. V.B. Ginzburg, Steel Rolling Technology – Theory and Practice, Marcel Dekker,
Inc., New York, 1989.
42. V.B. Ginzburg and R. Ballas, Flat Rolling Fundamentals, Marcel Dekker, Inc., New
York, 2000.
43. W.L. Roberts, Cold Rolling of Steel, Marcel Dekker, Inc., New York, 1978.
44. W.L. Roberts, Flat Processing of Steel, Marcel Dekker, Inc., New York, 1988.
45. W.L. Roberts, Hot Rolling of Steel, Marcel Dekker, Inc., New York, 1983.
46. W.R. Brown, W.R. Bradley and L.W. Czermanski, Innovative single rolling oil
system for cold reduction of tinplate substrate and mill clean sheet at Stelco, Iron
and Steel Engineer, Vol. 8, August 1995, pp 48-52.
47. W.R.D. Wilson and X.B. Huang, Theory of viscoplastic lubrication: Part 2-
Applications, ASME J. of Tribology, Vol. 114, July 1992, pp 477-484.
Flat Rolling Lubrication
48. W.R.D. Wilson, Y. Sakaguchi and S.R. Schmid, A dynamic concentration model for
lubrication with oil-in-water emulsions, Wear, Vol. 161, 1993, pp 207-212.
49. Wolfgang Rasp and Peter Hafele, Investigations into tribology of cold strip rolling,
Steel Researcg, Vol. 69, No. 4 and 5, 1998, pp 154-160.
50. X.B. Huang and W.R.D. Wilson, Theory of viscoplastic lubrication: Part 1-Basic
relationships, ASME J. of Tribology, Vol. 114, July 1992, pp 469-476.
51. Y. Zhang, R.D. Evans and K.F. Kunkel, New advances in cold rolling lubrication
technology, Iron and Steel Engineer, May 1995, pp 45-48.