You are on page 1of 74

Technical Data

Push-in Terminal Block Specifications


Bulletin Number 1492-P

Topic Page
Single-level, Feed-through Terminal Blocks 2
Single-level, Feed-through Grounding Terminal Blocks 14
Double-level, Feed-through Terminal Blocks 25
Double-level, Feed-through Grounding Terminal Blocks 27
Three-level, Feed-through Terminal Blocks 29
Three-level, Feed-through Grounding Terminal Blocks 31
Four-level Feed-through Terminal Blocks 33
Disconnect Terminal Blocks 34
Sensor Terminal Blocks 37
Control Power Distribution Terminal Blocks 42
Single-level Flex Plug-in Terminal Blocks 58
Double-level Flex Plug-in Terminal Blocks 60
Accessory Plug-in Terminal Blocks 64
Fuse Terminal Blocks 67
Panduit Ferrules and Tools for use with 1492-P2 Terminal Blocks 68
Panduit Ferrules and Tools for use with 1492-P3 Terminal Blocks 69
Panduit Ferrules and Tools for use with 1492-P4 Terminal Blocks 70
Panduit Ferrules and Tools for use with 1492-P6 Terminal Blocks 71
Panduit Ferrules and Tools for use with 1492-P10 Terminal Blocks 72
Push-in Terminal Block Specifications

Single-level, Feed-through Terminal Blocks Accessories Cat. No. Pkg Qty.


(1)
Center Jumpers
1492-P2 2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
10-pole 1492-CJP2-10
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 55 mm 20-pole 1492-CJP2-20
Pkg. Pkg. 50-pole 1492-CJP2-50
Color Cat. No. Color Cat. No.
Qty. Qty.
Test Plugs
 Grey 1492-P2 100  Green 1492-P2-G 100
Start Test Plug 1492-PTPS 50
 Red 1492-P2-RE 100  Yellow 1492-P2-Y 100 Test Plugs
Test Plug 1492-P2TPE 50
 Blue 1492-P2-B 100  Orange 1492-P2-OR 100
Marking Systems
 Black 1492-P2-BL 100  White 1492-P2-W 100
ClearPlot™ Basic Marker Cards 1492-M3x5 (100/card) 5 cards
ClearMultiprint™ Markers 1492-MT3X8 (1000/roll) 1 roll
Specifications — Single-level Feed-through Terminal Block
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Certifications /CSA IEC ATEX listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP2-2-RE.
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC
Maximum Current 13 A 17.5 A 15 A Wiring Diagram
Wire Range/ 26…14 AWG 1.5 mm2 1.5 mm2
Rated Cross Section
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Housing Temperature
Range -76…266°F (-60…130 °C)

IMPORTANT See page 68 for ferrule selection.


Accessories Cat. No. Pkg Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2 50
End Barriers Blue 1492-EBP2-B 50
Yellow 1492-EBP2-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

2 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P2T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 61.5 mm 10-pole 1492-CJP2-10

Color Cat. No. Pkg. Color Cat. No. Pkg. 20-pole 1492-CJP2-20
Qty. Qty. 50-pole 1492-CJP2-50

 Grey 1492-P2T 50  Green 1492-P2T-G 50 Test Plugs

 Red 1492-P2T-RE 50  Yellow 1492-P2T-Y 50


Test Plugs
Start Test Plug 1492-PTPS 50

 Blue 1492-P2T-B 50  Orange 1492-P2T-OR 50 Test Plug 1492-P2TPE 50

 Black 1492-P2T-BL 50  White 1492-P2T-W 50 Marking Systems


ClearPlot Basic Marker Cards 1492-M3x5 (100/card) 5 cards
Specifications — Single-level Feed-through Terminal Block ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC 1492-CJP2-2-RE.
Maximum
13 A 17.5 A 15 A
Current Wiring Diagram
Wire Range
(Rated Cross 26…14 AWG 1.5 mm2 1.5 mm2
Section)
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Housing
Temperature -76…266°F (-60…130 °C)
Range
IMPORTANT See page 68 for ferrule selection.

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2T 50
End Barriers Blue 1492-EBP2T-B 50
Yellow 1492-EBP2T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 3


Push-in Terminal Block Specifications

1492-P2Q Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 67.5 mm
10-pole 1492-CJP2-10
Color Cat. No. Pkg. Color Cat. No. Pkg.
20-pole 1492-CJP2-20
Qty. Qty.
50-pole 1492-CJP2-50
 Grey 1492-P2Q 100  Green 1492-P2Q-G 100
Test Plugs
 Red 1492-P2Q-RE 100  Yellow 1492-P2Q-Y 100
Start Test Plug 1492-PTPS 50
 Blue 1492-P2Q-B 100  Orange 1492-P2Q-OR 100 Test Plugs
Test Plug 1492-P2TPE 50
 Black 1492-P2Q-BL 100  White 1492-P2Q-W 100
Marking Systems
ClearPlot Basic Marker Cards 1492-M3x5 (100/card) 5 cards
Specifications — Single-level Feed-through Terminal Block
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Certifications /CSA IEC ATEX
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP2-2-RE.
Maximum Current 13 A 17.5 A 15 A
Wire Range
(Rated Cross Section)
26…14 AWG 1.5 mm2 1.5 mm2 Wiring Diagram
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Housing Temperature
Range -76…266 °F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
IMPORTANT See page 68 for ferrule selection.
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2Q 50
End Barriers Blue 1492-EBP2Q-B 50
Yellow 1492-EBP2Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

4 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P3 Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 55 mm 10-pole 1492-CJP3-10

Pkg. Pkg. 20-pole 1492-CJP3-20


Color Cat. No. Color Cat. No.
Qty. Qty. 50-pole 1492-CJP3-50
 Grey 1492-P3 100  Green 1492-P3-G 100 Test Plugs
 Red 1492-P3-RE 100  Yellow 1492-P3-Y 100
Start Test Plug 1492-PTPS 50
Test Plugs
 Blue 1492-P3-B 100  Orange 1492-P3-OR 100
Test Plug 1492-P3TPE 50
 Black 1492-P3-BL 100  White 1492-P3-W 100 Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Specifications — Single-level Feed-through Terminal Block
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Maximum Current 20 A 24 A 21 A
Wire Range
28…12 AWG 2.5 mm2 2.5 mm2 Wiring Diagram
(Rated Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


IMPORTANT See page 69 for ferrule selection.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3 50
End Barriers Blue 1492-EBP3-B 50
Yellow 1492-EBP3-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 5


Push-in Terminal Block Specifications

1492-P3T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 66.5 mm 10-pole 1492-CJP3-10

Color Cat. No. Pkg. Color Cat. No. Pkg. 20-pole 1492-CJP3-20
Qty. Qty. 50-pole 1492-CJP3-50

 Grey 1492-P3T 100  Green 1492-P3T-G 100 Test Plugs

 Red 1492-P3T-RE 100  Yellow 1492-P3T-Y 100


Test Plugs
Start Test Plug 1492-PTPS 50

 Blue 1492-P3T-B 100  Orange 1492-P3T-OR 100 Test Plug 1492-P3TPE 50

 Black 1492-P3T-BL 100  White 1492-P3T-W 100 Marking Systems


ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Specifications — Single-level Feed-through Terminal Block ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Voltage Rating 600V AC 800V AC 550V AC 1492-CJP3-2-RE
Maximum Current 20 A 24 A 21 A Wiring Diagram
Wire Range
28…12 AWG 2.5 mm2 2.5 mm2
(Rated Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing IMPORTANT See page 69 for ferrule selection.
-76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3T 50
End Barriers Blue 1492-EBP3T-B 50
Yellow 1492-EBP3T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

6 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P3Q Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 77.5 mm 10-pole 1492-CJP3-10

Color Cat. No. Pkg. Color Cat. No. Pkg. 20-pole 1492-CJP3-20
Qty. Qty. 50-pole 1492-CJP3-50

 Grey 1492-P3Q 100  Green 1492-P3Q-G 100 Test Plugs

 Red 1492-P3Q-RE 100  Yellow 1492-P3Q-Y 100


Test Plugs
Start Test Plug 1492-PTPS 50

 Blue 1492-P3Q-B 100  Orange 1492-P3Q-OR 100 Test Plug 1492-P3TPE 50

 Black 1492-P3Q-BL 100  White 1492-P3Q-W 100 Marking Systems


ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Specifications — Single-level Feed-through Terminal Block ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Voltage Rating 600V AC 800V AC 550V AC 1492-CJP3-2-RE.
Maximum Current 20 A 24 A 21 A Wiring Diagram
Wire Range (Rated Cross
28…12 AWG 2.5 mm2 2.5 mm2
Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature -76…266°F (-60…130 °C)
Range IMPORTANT See page 69 for ferrule selection.

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3Q 50
End Barriers Blue 1492-EBP3Q-B 50
Yellow 1492-EBP3Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 7


Push-in Terminal Block Specifications

1492-P4 Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 60 mm 10-pole 1492-CJP4-10

Pkg. Pkg. 50-pole 1492-CJP4-50 5


Color Cat. No. Color Cat. No.
Qty. Qty. Test Plugs
 Grey 1492-P4 100  Green 1492-P4-G 100
Start Test Plug 1492-PTPS 50
Test Plugs
 Red 1492-P4-RE 100  Yellow 1492-P4-Y 100
Test Plug 1492-P4TPE 50
 Blue 1492-P4-B 100  Orange 1492-P4-OR 100 Marking Systems
 Black 1492-P4-BL 100  White 1492-P4-W 100 ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Specifications — Single-level Feed-through Terminal Block
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Certifications /CSA IEC ATEX listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP4-4-RE.
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
Wiring Diagram
Maximum Current 30 A 32 A 30 A
Wire Range (Rated 26…10 AWG 4 mm2 4 mm2
Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 49 pcs/ft (163 pcs/m)
Housing Temperature
Range -76…266°F (-60…130 °C) IMPORTANT See page 70 for ferrule selection.

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4 50
End Barriers Blue 1492-EBP4-B 50
Yellow 1492-EBP4-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

8 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P4T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 74 mm 10-pole 1492-CJP4-10

Color Cat. No. Pkg. Color Cat. No. Pkg. 50-pole 1492-CJP4-50 5
Qty. Qty. Test Plugs

 Grey 1492-P4T 50  Green 1492-P4T-G 50


Test Plugs
Start Test Plug 1492-PTPS 50

 Red 1492-P4T- 50  Yellow 1492-P4T-Y 50 Test Plug 1492-P4TPE 50

 Blue 1492-P4T-B 50  Orange 1492-P4T-OR 50 Marking Systems

 Black 1492-P4T- 50  White 1492-P4T-W 50 ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Specifications — Single-level Feed-through Terminal Block (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Certifications /CSA IEC ATEX 1492-CJP4-2-RE.
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC Wiring Diagram
Maximum Current 30 A 32 A 30 A
Wire Range (Rated Cross
26…10 AWG 4 mm2 4 mm2
Section)
Wire Strip Length 0.47 in. (12 mm)
Density 49 pcs/ft (163 pcs/m)
Housing Temperature -76…266°F (-60…130 °C) IMPORTANT See page 70 for ferrule selection.
Range

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4T 20
End Barriers Blue 1492-EBP4T-B 20
Yellow 1492-EBP4T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 9


Push-in Terminal Block Specifications

1492-P4Q Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 87.5 mm 10-pole 1492-CJP4-10

Pkg. Pkg. 50-pole 1492-CJP4-50 5


Color Cat. No. Color Cat. No.
Qty. Qty. Test Plugs
 Grey 1492-P4Q 50  Green 1492-P4Q-G 50 Start Test Plug 1492-PTPS 50
Test Plugs
 Red 1492-P4Q-RE 50  Yellow 1492-P4Q-Y 50 Test Plug 1492-P4TPE 50
 Blue 1492-P4Q-B 50  Orange 1492-P4Q-OR 50 Marking Systems
 Black 1492-P4Q-BL 50  White 1492-P4Q-W 50 ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Specifications — Single-level Feed-through Terminal Block
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Certifications /CSA IEC ATEX listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP4-2-RE.
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
Maximum Current 30 A 32 A 30 A Wiring Diagram
Wire Range (Rated 26…10 AWG 4 mm2 4 mm2
Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 49 pcs/ft (163 pcs/m)
Housing Temperature
Range -76…266°F (-60…130 °C)
IMPORTANT See page 70 for ferrule selection.
Accessories Cat. No. Pkg Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4Q 20
End Barriers Blue 1492-EBP4Q-B 20
Yellow 1492-EBP4Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

10 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6 Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP6-2 60
3-pole Orange 1492-CJP6-3 20
4-pole 1492-CJP6-4 60
Test Plugs

Start Test Plug 1492-PTPS 50


Test Plugs
Test Plug 1492-P6TPE 50
Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Terminal Blocks—Dimensions (W x H x L): 8.1 x 45.5 x 66.5 mm ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll

Pkg. Pkg. (1) Available in orange as standard, to order in blue, add B to the catalog number listed: Example for a blue
Color Cat. No. Color Cat. No. 2-pole center jumper, the catalog number will be 1492-CJP6-2-B.
Qty. Qty.

 Grey 1492-P6 50  Green 1492-P6-G 50


Wiring Diagram
 Red 1492-P6-RE 50  Yellow 1492-P6-Y 50

 Blue 1492-P6-B 50  Orange 1492-P6-OR 50

 Black 1492-P6-BL 50  White 1492-P6-W 50

Specifications — Single-level Feed-through Terminal Block


Certifications /CSA IEC ATEX IMPORTANT See page 71 for ferrule selection.
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
Maximum Current 38 A 41 A 36 A
Wire Range (Rated 22…8 AWG 6 mm2 6 mm2
Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 37 pcs/ft (123 pcs/m)
Housing Temperature
Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP6 50
End Barriers Blue 1492-EBP6-B 50
Yellow 1492-EBP6-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 11


Push-in Terminal Block Specifications

1492-P6T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP6-2 60
3-pole Orange 1492-CJP6-3 20
4-pole 1492-CJP6-4 60
Test Plugs

Start Test Plug 1492-PTPS 50


Test Plugs
Test Plug 1492-P6TPE 50
Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Terminal Blocks —Dimensions (W x H x L): 8.1 x 45.5 x 84.5 mm ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll

Pkg. Pkg. (1) Available in orange as standard, to order in blue, add B to the catalog number listed: Example for a blue
Color Cat. No. Color Cat. No. 2-pole center jumper, the catalog number will be 1492-CJP6-2-B.
Qty. Qty.

 Grey 1492-P6T 50  Green 1492-P6T-G 50


Wiring Diagram
 Red 1492-P6T-RE 50  Yellow 1492-P6T-Y 50
 Blue 1492-P6T-B 50  Orange 1492-P6T-OR 50
 Black 1492-P6T-BL 50  White 1492-P6T-W 50

Specifications — Single-level Feed-through Terminal Block


Certifications /CSA IEC ATEX
IMPORTANT See page 71 for ferrule selection.
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
Maximum Current 38 A 41 A 36 A
Wire Range 22…8 AWG 6 mm2 6 mm2
(Rated Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 37 pcs/ft (123 pcs/m)
Housing Temperature
Range -76…266 °F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP6T 50
End Barriers Blue 1492-EBP6T-B 20
Yellow 1492-EBP6T-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

12 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6D Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
Terminal Blocks —Dimensions (W x H x L): 9 x 45.5 x 77 mm 10-pole 1492-CJP2-10

Pkg. Pkg. 20-pole 1492-CJP2-20


Color Cat. No. Color Cat. No.
Qty. Qty. 50-pole 1492-CJP2-50
 Grey 1492-P6D 20  Blue 1492-P6D-B 20 Test Plugs

Start Test Plug 1492-PTPS 50


Specifications — Single-level Feed-through Distribution Terminal Block Test Plugs
Test Plug 1492-P6TPE 50
Certifications /CSA IEC ATEX Marking Systems
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Maximum Current 38 A 41 A 33 A ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
Wire Range 22…8 AWG 6 mm2 6 mm2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP2-2-RE.
Wire Strip Length 0.47 in. (12 mm)
Density 34 pcs/ft (111 pcs/m)
Wiring Diagram
Housing Temperature
Range -76…266 °F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10
1492-DR5 10
IMPORTANT See page 71 for ferrule selection.
Mounting Rail Aluminum
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise
Angled (Steel) 1492-DR7 2
End Barriers Included as part of 1492-P6D or 1492-P6D-B
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 13


Push-in Terminal Block Specifications

Single-level, Feed-through Grounding Terminal Blocks Accessories Cat. No. Pkg. Qty.
Center Jumper(1)
1492-PG2 2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
10-pole 1492-CJP2-10
20-pole 1492-CJP2-20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 55 mm 50-pole 1492-CJP2-50
Pkg. Test Plugs
Color Cat. No.
Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Green/Yellow 1492-PG2 50
Test Plug 1492-P2TPE 50
Marking Systems
Specifications — Single-level Feed-through Grounding Terminal Block
ClearPlot Basic Marker Cards 1492-M3x5 (100/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Wire Range listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
26…14 AWG 1.5 mm2 1.5 mm2 1492-CJP2-2-RE.
(Rated Cross Section)
Wire Strip Length 0.31 in. (8 mm)
Wiring Diagram
Density 87 pcs/ft (285 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

PE
Accessories Cat. No. Pkg. Qty.
Mounting Rails, End Barriers, End Anchors and Retainers
199-DR1 10
Steel IMPORTANT See page 68 for ferrule selection.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2 50
End Barriers Blue 1492-EBP2-B 50
Yellow 1492-EBP2-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

14 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG2T Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
7-pole Orange 1492-CJP2-7 20
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
10-pole 1492-CJP2-10
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 61.5 mm
20-pole 1492-CJP2-20
Pkg.
Color Cat. No. 50-pole 1492-CJP2-50
Qty.
Test Plugs
 Green/Yellow 1492-PG2T 50
Start Test Plug 1492-PTPS 50
Test Plugs
Specifications — Single-level Feed-through Grounding Terminal Block Test Plug 1492-P2TPE 50

Certifications /CSA IEC ATEX Marking Systems


ClearPlot Basic Marker Cards 1492-M3x5 (100/card) 5 cards
Voltage Rating 300V AC/DC 500V AC/DC 500V AC/DC
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Wire Range
26…14 AWG 1.5 mm2 1.5 mm2
(Rated Cross Section) (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Wire Strip Length 0.31 in. (8 mm) 1492-CJP2-2-RE.
Density 87 pcs/ft (285 pcs/m)
Housing -76…266°F (-60…130 °C)
Temperature Range Wiring Diagram

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers PE
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2 IMPORTANT See page 68 for ferrule selection.
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2T 50
End Barriers Blue 1492-EBP2T-B 50
Yellow 1492-EBP2T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 15


Push-in Terminal Block Specifications

1492-PG2Q Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2
3-pole 1492-CJP2-3
4-pole 1492-CJP2-4
5-pole 1492-CJP2-5
6-pole 1492-CJP2-6
Orange 20
7-pole 1492-CJP2-7
8-pole 1492-CJP2-8
9-pole 1492-CJP2-9
Terminal Blocks—Dimensions (W x H x L): 3.5 x 33.5 x 67.5 mm 10-pole 1492-CJP2-10

Pkg. 20-pole 1492-CJP2-20


Color Cat. No.
Qty.
Test Plugs
 Green/Yellow 1492-PG2Q 50
Start Test Plug 1492-PTPS 50
Test Plugs
Test Plug 1492-P2TPE 50
Specifications — Single-level Feed-through Grounding Terminal Block
Marking Systems
Certifications /CSA IEC ATEX ClearPlot Basic Marker Cards 1492-M3x5 (100/card) 5 cards
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Wire Range 2 2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
26…14 AWG 1.5 mm 1.5 mm
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP2-2-RE.
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Wiring Diagram
Housing -76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty. PE

Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10
1492-DR5 10
IMPORTANT See page 68 for ferrule selection.
Mounting Rail Aluminum
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP2Q 50
End Barriers Blue 1492-EBP2Q-B 50
Yellow 1492-EBP2Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

16 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG3 Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 55 mm 20-pole 1492-CJP3-20
Pkg. 50-pole 1492-CJP3-50
Color Cat. No.
Qty.
Test Plugs
 Green/Yellow 1492-PG3 50
Start Test Plug 1492-PTPS 50
Test Plugs
Test Plug 1492-P3TPE 50
Specifications — Single-level Feed-through Grounding Terminal Block
Marking Systems
Certifications /CSA IEC ATEX
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Wire Range 2 2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
28…12 AWG 2.5 mm 2.5 mm
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Wire Strip Length 0.4 in. (10 mm) 1492-CJP3-2-RE.

Density 59 pcs/ft (196 pcs/m)


Wiring Diagram
Housing -76…266°F (-60…130 °C)
Temperature Range

PE
Accessories Cat. No. Pkg Qty.
Mounting Rails, End Barriers, End Anchors and Retainers
199-DR1 10
Steel IMPORTANT See page 69 for ferrule selection.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3 50
End Barriers Blue 1492-EBP3-B 50
Yellow 1492-EBP3-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 17


Push-in Terminal Block Specifications

1492-PG3T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 66.5 mm 20-pole 1492-CJP3-20

Pkg. 50-pole 1492-CJP3-50


Color Cat. No.
Qty. Test Plugs
 Green/Yellow 1492-PG3T 50
Start Test Plug 1492-PTPS 50
Test Plugs
Test Plug 1492-P3TPE 50
Specifications — Single-level Feed-through Grounding Terminal Block
Marking Systems
Certifications /CSA IEC ATEX
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Wire Range 2
28…12 AWG 2.5 mm 2.5 mm2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Wiring Diagram
Housing
Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty. PE

Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10
1492-DR5 10
IMPORTANT See page 69 for ferrule selection.
Mounting Rail Aluminum
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3T 50
End Barriers Blue 1492-EBP3T-B 50
Yellow 1492-EBP3T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

18 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG3Q Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 77.5 mm
50-pole 1492-CJP3-50
Color Cat. No. Pkg. Qty.
Test Plugs
 Green/Yellow 1492-PG3Q 50
1492-PTPS 50
Start Test Plug
Test Plugs
Test Plug 1492-P3TPE 50
Specifications — Single-level Feed-through Grounding Terminal Block
Marking Systems
Certifications /CSA IEC ATEX
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
2.5 mm2 2.5 mm2
Wire Range (Rated
26…12 AWG (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Cross Section)
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Wire Strip Length 0.4 in. (10 mm) 1492-CJP3-2-RE.
Density 59 pcs/ft (196 pcs/m)
Housing
Wiring Diagram
-76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg Qty. PE


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10 IMPORTANT See page 69 for ferrule selection.
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3Q 50
End Barriers Blue 1492-EBP3Q-B 50
Yellow 1492-EBP3Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 19


Push-in Terminal Block Specifications

1492-PG4 Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
10-pole 1492-CJP4-10
50-pole 1492-CJP4-50 5
Test Plugs
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 60 mm
Start Test Plug 1492-PTPS 50
Color Cat. No. Pkg. Qty. Test Plugs
Test Plug 1492-P4TPE 50
 Green/Yellow 1492-PG4 50
Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Specifications — Single-level Feed-through Grounding Terminal Block
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Certifications /CSA IEC ATEX
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP4-2-RE.
Wire Range (Rated 26…10 AWG 4 mm2 4 mm2
Cross Section)
Wire Strip Length 0.47 in. (12 mm) Wiring Diagram
Density 49 pcs/ft (163 pcs/m)
Housing
Temperature Range -76…266°F (-60…130 °C) PE

Accessories Cat. No. Pkg Qty.


IMPORTANT See page 70 for ferrule selection.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4 50
End Barriers Blue 1492-EBP4-B 50
Yellow 1492-EBP4-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

20 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG4T Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
10-pole 1492-CJP4-10
50-pole 1492-CJP4-50 5
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 74 mm Test Plugs

Color Cat. No. Pkg. Qty. Start Test Plug 1492-PTPS 50


Test Plugs
 Green/Yellow 1492-PG4T 50 Test Plug 1492-P4TPE 50
Marking Systems
Specifications — Single-level Feed-through Grounding Terminal Block ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards

Certifications /CSA IEC ATEX ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll

Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP4-2-RE.
Wire Range (Rated 26…10 AWG 4 mm2 4 mm2
Cross Section)
Wire Strip Length 0.47 in. (12 mm) Wiring Diagram
Density 49 pcs/ft (163 pcs/m)
Housing
Temperature Range -76…266°F (-60…130 °C)
PE

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10
IMPORTANT See page 70 for ferrule selection.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4T 20
End Barriers Blue 1492-EBP4T-B 20
Yellow 1492-EBP4T-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 21


Push-in Terminal Block Specifications

1492-PG4Q Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
9-pole 1492-CJP4-9
Terminal Blocks—Dimensions (W x H x L): 6.1 x 39.5 x 87.5 mm 10-pole 1492-CJP4-10

Color Cat. No. Pkg. Qty. 50-pole 1492-CJP4-50 5


Test Plugs
 Green/Yellow 1492-PG4Q 50
Start Test Plug 1492-PTPS 50
Test Plugs
Specifications — Single-level Feed-through Grounding Terminal Block Test Plug 1492-P4TPE 50

Certifications /CSA IEC ATEX Marking Systems

Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Wire Range (Rated 26…10 AWG 4 mm2 4 mm2
Cross Section) (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Wire Strip Length 0.47 in. (12 mm) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be 1492-
CJP4-2-RE.
Density 49 pcs/ft (163 pcs/m)
Housing
-76…266°F (-60…130 °C) Wiring Diagram
Temperature Range

Accessories Cat. No. Pkg Qty.


PE
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN
IMPORTANT See page 70 for ferrule selection.
Hi-Rise (Aluminum) 1492-DR6 2

Angled (Steel) 1492-DR7 2


Grey 1492-EBP4Q 20
End Barriers Blue 1492-EBP4Q-B 20
Yellow 1492-EBP4Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

22 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG6 Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP6-2 60
3-pole Orange 1492-CJP6-3 20
4-pole 1492-CJP6-4 60
Test Plugs

Start Test Plug 1492-PTPS 50


Test Plugs
Test Plug 1492-P6TPE 50
Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
Terminal Blocks—Dimensions (W x H x L): 8.1x 45.5 x 66.5 mm
(1) Available in orange as standard, to order in blue, add -B suffix to the catalog number listed.
Color Cat. No. Pkg. Qty. Example for a blue 2-pole center jumper, the catalog number will be 1492-CJP6-2-B.

 Green/Yellow 1492-PG6 50
Wiring Diagram
Specifications — Single-level Feed-through Grounding Terminal Block
Certifications /CSA IEC ATEX
Voltage Rating 600V AC/DC 800V AC 550V AC PE

6 mm2 6 mm2
Wire Range (Rated
Cross Section) 22…8 AWG

Wire Strip Length 0.47 in (12 mm) IMPORTANT See page 71 for ferrule selection.
Density 37 pcs/ft (123 pcs/m)
Housing
-76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP6 50
End Barriers Blue 1492-EBP6-B 50
Yellow 1492-EBP6-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 23


Push-in Terminal Block Specifications

1492-PG6T Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP6-2 60
3-pole Orange 1492-CJP6-3 20
4-pole 1492-CJP6-4 60
Test Plugs

Start Test Plug 1492-PTPS 50


Test Plugs
Test Plug 1492-P6TPE 50
Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
Terminal Blocks—Dimensions (W x H x L): 8.1x 45.5 x 84.5 mm (1) Available in orange as standard, to order in blue, add -B suffix to the catalog number listed.
Example for a blue 2-pole center jumper, the catalog number will be 1492-CJP6-2-B.
Color Cat. No. Pkg. Qty.

 Green/Yellow 1492-PG6T 50 Wiring Diagram

Specifications — Single-level Feed-through Grounding Terminal Block


Certifications /CSA IEC ATEX PE
Voltage Rating 600V AC/DC 800V AC 550V AC

6 mm2 6 mm2
Wire Range (Rated
22…8 AWG
Cross Section)
IMPORTANT See page 71 for ferrule selection.
Wire Strip Length 0.47 in (12 mm)
Density 37 pcs/ft (123 pcs/m)
Housing -76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP6T 50
End Barriers Blue 1492-EBP6T-B 20
Yellow 1492-EBP6T-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

24 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Double-level, Feed-through Terminal Blocks Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
1492-PD3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
50-pole 1492-CJP3-50
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 90 mm Test Plugs
Pkg. Pkg. Start Test Plug 1492-PTPS 50
Color Cat. No. Color Cat. No. Test Plugs
Qty. Qty.
Test Plug 1492-P3TPE 50
 Grey 1492-PD3 50  Green 1492-PD3-G 50 Marking Systems
 Red 1492-PD3-RE 50  Yellow 1492-PD3-Y 50
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
 Blue 1492-PD3-B 50  Orange 1492-PD3-OR 50
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
 Black 1492-PD3-BL 50  White 1492-PD3-W 50
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be 1492-
CJP3-2-RE.
Specifications — Double-level Feed-through Terminal Block
Certifications /CSA IEC ATEX
Wiring Diagram
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
Maximum Current 20 A 24 A 21 A
Wire Range
28…12 AWG 2.5 mm2 2.5mm2
(Rated Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
IMPORTANT See page 69 for ferrule selection.
Housing Temperature -76…266°F (-60…130 °C)
Range

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 25


Push-in Terminal Block Specifications

1492-PD3C Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 90 mm 10-pole 1492-CJP3-10

Pkg. Pkg. 20-pole 1492-CJP3-20


Color Cat. No. Color Cat. No.
Qty. Qty. 50-pole 1492-CJP3-50
 Grey 1492-PD3C 50  Green 1492-PD3C-G 50 Test Plugs
 Red 1492-PD3C-RE 50  Yellow 1492-PD3C-Y 50
Start Test Plug 1492-PTPS 50
Test Plugs
 Blue 1492-PD3C-B 50  Orange 1492-PD3C-OR 50
Test Plug 1492-P3TPE 50
 Black 1492-PD3C-BL 50  White 1492-PD3C-W 50 Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Specifications — Double-level Feed-through Terminal Block
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Maximum Current 20 A 24 A 21 A
Wire Range
28…12 AWG 2.5 mm2 2.5mm2
Wiring Diagram
(Rated Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing -76…266°F (-60…130 °C)
Temperature Range

IMPORTANT See page 69 for ferrule selection.


Accessories Cat. No. Pkg Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

26 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Double-level, Feed-through Grounding Terminal Blocks Accessories Cat. No. Pkg. Qty.
Center Jumpers(1)
1492-PDG3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1x 50.5 x 90 mm 50-pole 1492-CJP3-50
Pkg. Test Plugs
Color Cat. No.
Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-PDG3 50
Test Plug 1492-P3TPE 50
Marking Systems
Specifications — Double-level Feed-through Grounding Terminal Block
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Maximum Current 20 A 24 A 21 A listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
2.5 mm2 2.5 mm2
Wire Range (Rated
28…12 AWG
Cross Section)
Wiring Diagram
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing -76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
IMPORTANT See page 69 for ferrule selection.
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 27


Push-in Terminal Block Specifications

1492-PDG3C Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10

Terminal Blocks—Dimensions (W x H x L): 5.1x 50.5 x 90 mm 20-pole 1492-CJP3-20

Color Cat. No. Pkg. Qty. 50-pole 1492-CJP3-50


Test Plugs
 Green/Yellow 1492-PDG3C 50
Start Test Plug 1492-PTPS 50
Test Plugs
Specifications — Double-level Feed-through Grounding Terminal Block Test Plug 1492-P3TPE 50

Certifications /CSA IEC ATEX Marking Systems

Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
2.5 mm2 2.5 mm2
Wire Range (Rated
28…12 AWG
Cross Section) (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Wire Strip Length 0.4 in. (10 mm) 1492-CJP2-2-RE.
Density 59 pcs/ft (196 pcs/m)
Housing Wiring Diagram
-76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10 IMPORTANT See page 69 for ferrule selection.


Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

28 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Three-level, Feed-through Terminal Blocks Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
1492-PT3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 64.5 x 116mm 50-pole 1492-CJP3-50
Pkg. Pkg. Test Plugs
Color Cat. No. Color Cat. No.
Qty. Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-PT3 50  Blue 1492-PT3-B 50
Test Plug 1492-P3TPE 50
Marking Systems
Specifications — Single-level Feed-through Terminal Block
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Maximum Current 20 A 24 A 19 A listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Range 2
28…12 AWG 2.5 mm 2.5 mm2
(Rated Cross Section)
Wiring Diagram
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
IMPORTANT See page 69 for ferrule selection.
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPT3 20
End Barriers
Blue 1492-EBPT3-B 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 29


Push-in Terminal Block Specifications

1492-PT3C Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 64.5 x 116mm 10-pole 1492-CJP3-10

Pkg. Pkg. 20-pole 1492-CJP3-20


Color Cat. No. Color Cat. No.
Qty. Qty. 50-pole 1492-CJP3-50
 Grey 1492-PT3C 50  Blue 1492-PT3C-B 50 Test Plugs

Start Test Plug 1492-PTPS 50


Specifications — Single-level Feed-through Terminal Block Test Plugs
Test Plug 1492-P3TPE 50
Certifications /CSA IEC ATEX Marking Systems
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Maximum Current 20 A 24 A 19 A ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Wire Range 2 2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
28…12 AWG 2.5 mm 2.5 mm
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C) Wiring Diagram

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum) IMPORTANT See page 69 for ferrule selection.
Angled (Steel) 1492-DR7 2
Grey 1492-EBPT3 20
End Barriers
Blue 1492-EBPT3-B 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

30 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Three-level, Feed-through Grounding Terminal Blocks Accessories Cat. No. Pkg Qty.
Center Jumpers(1)
1492-PTG3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 64.5 x 116 mm 50-pole 1492-CJP3-50
Pkg. Test Plugs
Color Cat. No.
Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-PTG3 50
Test Plug 1492-P3TPE 50
Marking Systems
Specifications — Single-level Feed-through Terminal Block
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Maximum Current 20 A 24 A 19 A listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Range 2
28…12 AWG 2.5 mm 2.5 mm2
(Rated Cross Section)
Wiring Diagram
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
IMPORTANT See page 69 for ferrule selection.
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPT3 20
End Barriers
Blue 1492-EBPT3-B 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 31


Push-in Terminal Block Specifications

1492-PTG3C Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 64.5 x 116 mm 10-pole 1492-CJP3-10

Pkg. 20-pole 1492-CJP3-20


Color Cat. No.
Qty. 50-pole 1492-CJP3-50
 Green/Yellow 1492-PTG3C 50 Test Plugs

Start Test Plug 1492-PTPS 50


Specifications — Single-level Feed-through Terminal Block Test Plugs
Test Plug 1492-P3TPE 50
Certifications /CSA IEC ATEX Marking Systems
Voltage Rating 600V AC/DC 800V AC/DC 550V AC/DC ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Maximum Current 20 A 24 A 19 A ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Wire Range 2 2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
28…12 AWG 2.5 mm 2.5 mm
(Rated Cross Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Wiring Diagram
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN
IMPORTANT See page 69 for ferrule selection.
Hi-Rise (Aluminum) 1492-DR6 2

Angled (Steel) 1492-DR7 2


Grey 1492-EBPT3 20
End Barriers
Blue 1492-EBPT3-B 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

32 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Four-level Feed-through Terminal Blocks Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
1492-PQ3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 88.5 x 107 mm 50-pole 1492-CJP3-50
Pkg. Test Plugs
Color Cat. No.
Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-PQ3 50
Test Plug 1492-P3TPE 50
 Grey 1492-PQ3-800 50 Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Specifications — Single-level Feed-through Terminal Block
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Certifications /CSA IEC ATEX
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Voltage Rating, -PQ3 600V AC/DC 690V AC/DC 440V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Voltage Rating, -PQ3-800 600V AC/DC 800V AC/DC 550V AC/DC
Maximum Current 20 A 24 A 19 A Wiring Diagram
Wire Range 2 2
28…12 AWG 2.5 mm 2.5 mm
(Rated Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

IMPORTANT See page 69 for ferrule selection.


Accessories Cat. No. Pkg Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
1492-EBPQ3 20
End Barriers Grey
Included as part of 1492-PQ3-800
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 33


Push-in Terminal Block Specifications

Disconnect Terminal Blocks Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
1492-PKD3 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 37.65 x 77.5 mm 50-pole 1492-CJP3-50
Pkg. Pkg. Test Plugs
Color Cat. No. Color Cat. No.
Qty. Qty.
Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-PKD3 50  Blue 1492-PKD3-B 50
Test Plug 1492-P3TPE 50
Marking Systems
Specifications — Single-level Disconnect Terminal Block
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 300V AC/DC 500V AC/DC 400V AC/DC
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Maximum Current 20 A 20 A 20 A listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
2.5 mm2 2.5 mm2
Wire Range (Rated Cross
28…12 AWG
Section)
Wiring Diagram
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature -76…266°F (-60…130 °C)
Range

Accessories Cat. No. Pkg. Qty.


IMPORTANT See page 69 for ferrule selection.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP3Q 50
End Barriers Blue 1492-EBP3Q-B 50
Yellow 1492-EBP3Q-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

34 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PKD3T Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 37.65 x 84.5 mm 10-pole 1492-CJP3-10

Pkg. Pkg. 20-pole 1492-CJP3-20


Color Cat. No. Color Cat. No.
Qty. Qty. 50-pole 1492-CJP3-50
 Grey 1492-PKD3T 50  Blue 1492-PKD3T-B 50 Test Plugs

Start Test Plug 1492-PTPS 50


Specifications — Single-level Feed-through Terminal Block Test Plugs
Test Plug 1492-P3TPE 50
Certifications /CSA IEC ATEX Marking Systems
Voltage Rating 300V AC/DC 500V AC/DC 400V AC/DC ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Maximum Current 20 A 20 A 20 A ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Wire Range (Rated Cross 28…12 AWG 2.5 mm2 2.5 mm2 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Section) listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Wiring Diagram
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10 IMPORTANT See page 69 for ferrule selection.
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPKD3T 50
End Barriers
Blue 1492-EBPKD3T-B 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 35


Push-in Terminal Block Specifications

1492-PKD3Q Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
Terminal Blocks—Dimensions (W x H x L): 5.1 x 37.65 x 96 mm 20-pole 1492-CJP3-20
Pkg. Pkg. 50-pole 1492-CJP3-50
Color Cat. No. Color Cat. No.
Qty. Qty.
Test Plugs
 Grey 1492-PKD3Q 50  Blue 1492-PKD3Q-B 50
1492-PTPS 50
Start Test Plug
Test Plugs
Test Plug 1492-P3TPE 50
Specifications — Single-level Disconnect Terminal Block
Marking Systems
Certifications /CSA IEC ATEX
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Voltage Rating 300V AC/DC 500V AC/DC 400V AC/DC
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Maximum Current 20 A 20 A 20 A
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
2.5 mm2 2.5 mm2
Wire Range (Rated listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
28…12 AWG
Cross Section) 1492-CJP3-2-RE.
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m) Wiring Diagram
Housing Temperature -76…266°F (-60…130 °C)
Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
Steel 199-DR1 10 IMPORTANT See page 69 for ferrule selection.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN Hi-Rise (Aluminum) 1492-DR6 2
Angled (Steel) 1492-DR7 2
Grey 1492-EBPKD3Q 50
End Barriers
Blue 1492-EBPKD3Q-B 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

36 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Sensor Terminal Blocks Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
1492-PS2-2 2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Blue 1492-CJP2-6-B 20
6-pole
Red 1492-CJP2-6-RE 20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 42 x 80 mm Blue 1492-CJP2-7-B 20
7-pole
Color Cat. No. Pkg. Qty. Red 1492-CJP2-7-RE 20

 Grey 1492-PS2-2 100


8-pole
Blue 1492-CJP2-8-B 20
Red 1492-CJP2-8-RE 20
Specifications — Sensor Terminal Block Blue 1492-CJP2-9-B 20
9-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-9-RE 20

Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-10-B 20
10-pole
Maximum Current 13 A 13.5 A 12 A Red 1492-CJP2-10-RE 20
Blue 1492-CJP2-20-B 20
1.5 mm2 1.5 mm2
Wire Range (Rated
26…14 AWG 20-pole
Cross Section) Red 1492-CJP2-20-RE 20
Wire Strip Length 0.31 in. (8 mm) Blue 1492-CJP2-50-B 20
50-pole
Density 87 pcs/ft (285 pcs/m) Red 1492-CJP2-50-RE 20
Housing Temperature -76…266°F (-60…130 °C) Test Plugs
Range
Start Test Plug 1492-PTPS 50
Test Plugs
Test Plug 1492-P2TPE 50
Accessories Cat. No. Pkg. Qty.
Marking Systems
Mounting Rails, End Barriers, End Anchors and Retainers
ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Steel 199-DR1 10
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN (1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Hi-Rise (Aluminum) 1492-DR6 2 pole center jumper, the catalog number will be 1492-CJP2-2.
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBPS-3 50
End Retainer 1492-ERL35 20 Wiring Diagram
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 68 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 37


Push-in Terminal Block Specifications

1492-PS2-3 Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 42 x 80 mm Blue 1492-CJP2-6-B 20
6-pole
Color Cat. No. Pkg. Qty. Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
 Grey 1492-PS2-3 100
7-pole
Red 1492-CJP2-7-RE 20
Specifications — Sensor Terminal Block Blue 1492-CJP2-8-B 20
8-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-8-RE 20

Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-9-B 20
9-pole
Maximum Current 13 A 13.5 A 12 A Red 1492-CJP2-9-RE 20
Blue 1492-CJP2-10-B 20
Wire Range (Rated Cross 26…14 AWG 1.5 mm2 1.5 mm2 10-pole
Section) Red 1492-CJP2-10-RE 20
Wire Strip Length 0.31 in. (8 mm) Blue 1492-CJP2-20-B 20
20-pole
Density 87 pcs/ft (285 pcs/m) Red 1492-CJP2-20-RE 20
Housing Temperature Blue 1492-CJP2-50-B 20
Range -76…266°F (-60…130 °C) 50-pole
Red 1492-CJP2-50-RE 20
Test Plugs
Accessories Cat. No. Pkg. Qty.
Start Test Plug 1492-PTPS 50
Mounting Rails, End Barriers, End Anchors and Retainers Test Plugs
Test Plug 1492-P2TPE 50
Steel 199-DR1 10
Marking Systems
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Hi-Rise (Aluminum) 1492-DR6 2
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Angled (Steel) 1492-DR7 2
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
End Barriers Grey 1492-EBPS-3 50 pole center jumper, the catalog number will be 1492-CJP2-2.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100 Wiring Diagram
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 68 for ferrule selection.

38 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PSG2-3 Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 42 x 80 mm Blue 1492-CJP2-6-B 20
6-pole
Color Cat. No. Pkg. Qty. Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
 Grey 1492-PSG2-3 100
7-pole
Red 1492-CJP2-7-RE 20
Specifications — Sensor with Grounding Terminal Block Blue 1492-CJP2-8-B 20
8-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-8-RE 20

Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-9-B 20
9-pole
Maximum Current 13 A 13.5 A 12 A Red 1492-CJP2-9-RE 20
Blue 1492-CJP2-10-B 20
Wire Range (Rated 26…14 AWG 1.5 mm2 1.5 mm2 10-pole
Cross Section) Red 1492-CJP2-10-RE 20
Wire Strip Length 0.31 in. (8 mm) Blue 1492-CJP2-20-B 20
20-pole
Density 87 pcs/ft (285 pcs/m) Red 1492-CJP2-20-RE 20
Housing Temperature Blue 1492-CJP2-50-B 20
Range -76…266°F (-60…130 °C) 50-pole
Red 1492-CJP2-50-RE 20
Test Plugs
Accessories Cat. No. Pkg. Qty.
Start Test Plug 1492-PTPS 50
Mounting Rails, End Barriers, End Anchors and Retainers Test Plugs
Test Plug 1492-P2TPE 50
Steel 199-DR1 10
Marking Systems
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Hi-Rise (Aluminum) 1492-DR6 2
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Angled (Steel) 1492-DR7 2
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
End Barriers Grey 1492-EBPS-3 50 pole center jumper, the catalog number will be 1492-CJP2-2.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100 Wiring Diagram
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50
PE

IMPORTANT See page 68 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 39


Push-in Terminal Block Specifications

1492-PS2-4 Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 49.5 x 110 mm Blue 1492-CJP2-6-B 20
6-pole
Color Cat. No. Pkg. Qty. Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
 Grey 1492-PS2-4 100
7-pole
Red 1492-CJP2-7-RE 20
Specifications — Sensor Terminal Block Blue 1492-CJP2-8-B 20
8-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-8-RE 20

Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-9-B 20
9-pole
Maximum Current 13 A 13.5 A 12 A Red 1492-CJP2-9-RE 20
Blue 1492-CJP2-10-B 20
Wire Range (Rated 26…14 AWG 1.5 mm2 1.5 mm2 10-pole
Cross Section) Red 1492-CJP2-10-RE 20
Wire Strip Length 0.31 in. (8 mm) Blue 1492-CJP2-20-B 20
20-pole
Density 87 pcs/ft (285 pcs/m) Red 1492-CJP2-20-RE 20
Housing Blue 1492-CJP2-50-B 20
Temperature Range -76…266°F (-60…130 °C) 50-pole
Red 1492-CJP2-50-RE 20
Test Plugs
Accessories Cat. No. Pkg. Qty.
Start Test Plug 1492-PTPS 50
Mounting Rails, End Barriers, End Anchors and Retainers Test Plugs
Test Plug 1492-P2TPE 50
Steel 199-DR1 10
Marking Systems
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Hi-Rise (Aluminum) 1492-DR6 2
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Angled (Steel) 1492-DR7 2
(1) Available in orange. To order, remove the -B or RE suffix from the catalog number. Example for an orange
End Barriers Grey 1492-EBPS-4 50 2-pole center jumper, the catalog number will be 1492-CJP2-2.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Wiring Diagram
Normal Duty 1492-EAP35 50

IMPORTANT See page 68 for ferrule selection.

40 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PSG2-4 Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Terminal Blocks—Dimensions (W x H x L): 3.5 x 45x 89 mm Blue 1492-CJP2-6-B 20
6-pole
Color Cat. No. Pkg. Qty. Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
 Grey 1492-PSG2-4 100
7-pole
Red 1492-CJP2-7-RE 20
Specifications — Sensor with Grounding Terminal Block Blue 1492-CJP2-8-B 20
8-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-8-RE 20

Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-9-B 20
9-pole
Maximum Current 13 A 13.5 A 12 A Red 1492-CJP2-9-RE 20
Blue 1492-CJP2-10-B 20
Wire Range (Rated Cross 26…14 AWG 1.5 mm2 1.5 mm2 10-pole
Section) Red 1492-CJP2-10-RE 20
Wire Strip Length 0.31 in. (8 mm) Blue 1492-CJP2-20-B 20
20-pole
Density 87 pcs/ft (285 pcs/m) Red 1492-CJP2-20-RE 20
Housing Temperature Blue 1492-CJP2-50-B 20
Range -76…266°F (-60…130 °C) 50-pole
Red 1492-CJP2-50-RE 20
Test Plugs
Accessories Cat. No. Pkg. Qty.
Start Test Plug 1492-PTPS 50
Mounting Rails, End Barriers, End Anchors and Retainers Test Plugs
Test Plug 1492-P2TPE 50
Steel 199-DR1 10
Marking Systems
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Hi-Rise (Aluminum) 1492-DR6 2
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Angled (Steel) 1492-DR7 2
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
End Barriers Grey 1492-EBPGS-4 50 pole center jumper, the catalog number will be 1492-CJP2-2.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100 Wiring Diagram
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50
PE

IMPORTANT See page 68 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 41


Push-in Terminal Block Specifications

Control Power Distribution Terminal Blocks Accessories Cat. No. Pkg. Qty.
Center Jumpers(1)
1492-P6PD2S-1B 2-pole 1492-CJP2-2-B
3-pole 1492-CJP2-3-B
4-pole 1492-CJP2-4-B
5-pole 1492-CJP2-5-B
6-pole 1492-CJP2-6-B
7-pole Blue 1492-CJP2-7-B 20
8-pole 1492-CJP2-8-B
9-pole 1492-CJP2-9-B
10-pole 1492-CJP2-10-B
20-pole 1492-CJP2-20-B
50-pole 1492-CJP2-50-B
Test Plugs

Start Test Plug 1492-PTPS 50


Test Plugs
Terminal Blocks—Dimensions (W x H x L): 8.1 x 48 x 85.5 mm Test Plug 1492-P6TPE 50
Pkg. Marking Systems
Color Cat. No.
Qty.
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
 Grey 1492-P6PD2S-1B 20
ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
(1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
Specifications — Control Power Distribution Terminal Block center jumper, the catalog number will be 1492-CJP2-2.

Certifications /CSA IEC ATEX


Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC Wiring Diagram
Maximum Current 36 A 41 A 33 A
Wire Range
22…8 AWG 6 mm2 6 mm2
(Rated Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 37 pcs/ft (123 pcs/m)
IMPORTANT See page 71 for ferrule selection.
Housing Temperature
-76…266°F (-60…130 °C)
Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

42 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6PD2S-1RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2-RE
3-pole 1492-CJP2-3-RE
4-pole 1492-CJP2-4-RE
5-pole 1492-CJP2-5-RE
6-pole 1492-CJP2-6-RE
7-pole Red 1492-CJP2-7-RE 20
8-pole 1492-CJP2-8-RE
9-pole 1492-CJP2-9-RE
10-pole 1492-CJP2-10-RE
20-pole 1492-CJP2-20-RE
50-pole 1492-CJP2-50-RE
Test Plugs
Terminal Blocks—Dimensions (W x H x L): 8.1 x 48 x 85.5 mm
Start Test Plug 1492-PTPS 50
Pkg. Test Plugs
Color Cat. No. 1492-P6TPE 50
Qty. Test Plug

 Grey 1492-P6PD2S-1RE 20 Marking Systems


ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Specifications — Control Power Distribution Terminal Block ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
Certifications /CSA IEC ATEX (1) Available in orange, to order remove the -RE suffix from the catalog number. Example for an orange 2-pole
center jumper, the catalog number will be 1492-CJP2-2.
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC
Maximum Current 36 A 41 A 33 A Wiring Diagram
Wire Range 2 2
22…8 AWG 6 mm 6 mm
(Rated Cross Section)
Wire Strip Length 0.47 in. (12 mm)
Density 37 pcs/ft (123 pcs/m)
Housing Temperature
Range
-76…266°F (-60…130 °C) IMPORTANT See page 71 for ferrule selection.

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 43


Push-in Terminal Block Specifications

1492-PG6PD2S Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2-B
3-pole 1492-CJP2-3-B
4-pole 1492-CJP2-4-B
5-pole 1492-CJP2-5-B
6-pole 1492-CJP2-6-B
7-pole Blue 1492-CJP2-7-B 20
8-pole 1492-CJP2-8-B
9-pole 1492-CJP2-9-B
10-pole 1492-CJP2-10-B

Terminal Blocks—Dimensions (W x H x L): 8.1 x 48 x 85.5 mm 20-pole 1492-CJP2-20-B


50-pole 1492-CJP2-50-B
Pkg.
Color Cat. No.
Qty. Test Plugs

 Grey 1492-PG6PD2S 20
Test Plugs
Start Test Plug 1492-PTPS 50

Test Plug 1492-P6TPE 50


Specifications — Control Power Distribution with Grounding Terminal Block Marking Systems
Certifications /CSA IEC ATEX ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC ClearMultiprint Markers 1492-MT8X8 (500/roll) 1 roll
Wire Range (1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
(Rated Cross 22…8 AWG 6 mm2 6 mm2 center jumper, the catalog number will be 1492-CJP2-2.
Section)
Wire Strip Wiring Diagram
Length 0.47 in. (12 mm)

Density 37 pcs/ft (123 pcs/m)


Housing
Temperature -76…266°F (-60…130 °C)
Range

IMPORTANT See page 71 for ferrule selection.


Accessories Cat. No. Pkg. Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

44 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6PD2E-6B Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2-B
3-pole 1492-CJP2-3-B
4-pole 1492-CJP2-4-B
5-pole 1492-CJP2-5-B
6-pole 1492-CJP2-6-B
7-pole Blue 1492-CJP2-7-B 20
8-pole 1492-CJP2-8-B
9-pole 1492-CJP2-9-B
10-pole 1492-CJP2-10-B
20-pole 1492-CJP2-20-B
50-pole 1492-CJP2-50-B
Terminal Blocks—Dimensions (W x H x L): 3.5x 48 x 85.5 mm
Marking Systems
Pkg.
Color Cat. No. ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Qty.
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
 Grey 1492-P6PD2E-6B 50
(1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
center jumper, the catalog number will be 1492-CJP2-2.
Specifications — Control Power Distribution Terminal Block
Certifications /CSA IEC ATEX Wiring Diagram
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC
Maximum Current 13 A 17.5 A 13 A
Wire Range
(Rated Cross 26…14 AWG 1.5 mm2 1.5 mm2
Section)
IMPORTANT See page 68 for ferrule selection.
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Housing -76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 45


Push-in Terminal Block Specifications

1492-P6PD2E-6RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP2-2-RE
3-pole 1492-CJP2-3-RE
4-pole 1492-CJP2-4-RE
5-pole 1492-CJP2-5-RE
6-pole 1492-CJP2-6-RE
7-pole Red 1492-CJP2-7-RE 20
8-pole 1492-CJP2-8-RE
9-pole 1492-CJP2-9-RE
10-pole 1492-CJP2-10-RE
20-pole 1492-CJP2-20-RE
50-pole 1492-CJP2-50-RE
Marking Systems
Terminal Blocks—Dimensions (W x H x L): 3.5x 48 x 85.5 mm
ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Pkg. ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Color Cat. No.
Qty.
(1) Available in orange, to order remove the -RE suffix from the catalog number. Example for an orange 2-pole
 Grey 1492-P6PD2E-6RE 50 center jumper, the catalog number will be 1492-CJP2-2.

Specifications — Control Power Distribution Terminal Block Wiring Diagram


Certifications /CSA IEC ATEX
Voltage Rating 300V AC/DC 500V AC/DC 550V AC/DC
Maximum Current 13 A 17.5 A 13 A
Wire Range
(Rated Cross 26…14 AWG 1.5 mm2 1.5 mm2 IMPORTANT See page 68 for ferrule selection.
Section)
Wire Strip Length 0.31 in. (8 mm)
Density 87 pcs/ft (285 pcs/m)
Housing
Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

46 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6PD2S-1B1RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Blue 1492-CJP2-6-B 20
6-pole
Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
7-pole
Terminal Blocks—Dimensions (W x H x L): 8.1 x 48 x 96 mm Red 1492-CJP2-7-RE 20

Pkg. Blue 1492-CJP2-8-B 20


Color Cat. No. 8-pole
Qty. Red 1492-CJP2-8-RE 20
 Grey 1492-P6PD2S-1B1RE 20
9-pole
Blue 1492-CJP2-9-B 20
Red 1492-CJP2-9-RE 20
Specifications — Control Power Distribution Terminal Block Blue 1492-CJP2-10-B 20
10-pole
Certifications /CSA IEC ATEX Red 1492-CJP2-10-RE 20
Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC Blue 1492-CJP2-20-B 20
20-pole
Maximum Current 36 A 41 A 33 A Red 1492-CJP2-20-RE 20

6 mm2 6 mm2
Wire Range (Rated Blue 1492-CJP2-50-B 20
Cross Section) 22…8 AWG 50-pole
Red 1492-CJP2-50-RE 20
Wire Strip Length 0.47 in. (12 mm)
Test Plugs
Density 37 pcs/ft (123 pcs/m)
Start Test Plug 1492-PTPS 50
Housing Test Plugs
-76…266°F (-60…130 °C) Test Plug 1492-P6TPE 50
Temperature Range
Marking Systems

Accessories Cat. No. Pkg. Qty. ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards

Mounting Rails, End Barriers, End Anchors and Retainers ClearMultiprint Markers 1492-MT8X8 (600/roll) 1 roll

199-DR1 10 (1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Steel
pole center jumper, the catalog number will be 1492-CJP2-2.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum) Wiring Diagram
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2-BRE 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50 IMPORTANT See page 71 for ferrule selection.
Heavy Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 47


Push-in Terminal Block Specifications

1492-P6PD2S-1RE1G Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Blue 1492-CJP2-6-B 20
6-pole
Terminal Blocks—Dimensions (W x H x L): 8.1 x 48 x 96 mm Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
Color Cat. No. Pkg. Qty. 7-pole
Red 1492-CJP2-7-RE 20
 Grey 1492-P6PD2S-1RE1G 20
Blue 1492-CJP2-8-B 20
8-pole
Specifications — Control Power Distribution with Grounding Terminal Block Red 1492-CJP2-8-RE 20
Blue 1492-CJP2-9-B 20
Certifications /CSA IEC ATEX 9-pole
Red 1492-CJP2-9-RE 20
Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC
Blue 1492-CJP2-10-B 20
Maximum Current 36 A 41 A 33 A 10-pole
Red 1492-CJP2-10-RE 20
6 mm2 6 mm2
Wire Range (Rated
22…8 AWG
Cross Section) Blue 1492-CJP2-20-B 20
20-pole
Wire Strip Length 0.47 in. (12 mm) Red 1492-CJP2-20-RE 20
Density 37 pcs/ft (123 pcs/m) Blue 1492-CJP2-50-B 20
50-pole
Housing Red 1492-CJP2-50-RE 20
-76…266°F (-60…130 °C)
Temperature Range
Test Plugs

Start Test Plug 1492-PTPS 50


Accessories Cat. No. Pkg. Qty. Test Plugs
Test Plug 1492-P6TPE 50
Mounting Rails, End Barriers, End Anchors and Retainers
Marking Systems
Steel 199-DR1 10
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Mounting Rail Aluminum 1492-DR5 10
ClearMultiprint Markers 1492-MT8X8 (600/roll) 1 roll
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Angled (Steel) 1492-DR7 2 pole center jumper, the catalog number will be 1492-CJP2-2.
End Barriers Grey 1492-EBP6PD2-BRE 20
End Retainer 1492-ERL35 20 Wiring Diagram
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50 FE

IMPORTANT See page 71 for ferrule selection.

48 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P6PD2E-3B3RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP2-2-B 20
Red 1492-CJP2-2-RE 20
3-pole Blue 1492-CJP2-3-B 20
Red 1492-CJP2-3-RE 20
Blue 1492-CJP2-4-B 20
4-pole
Red 1492-CJP2-4-RE 20

5-pole Blue 1492-CJP2-5-B 20


Red 1492-CJP2-5-RE 20
Blue 1492-CJP2-6-B 20
6-pole
Terminal Blocks—Dimensions (W x H x L): 3.5x 48 x 96 mm Red 1492-CJP2-6-RE 20
Blue 1492-CJP2-7-B 20
Color Cat. No. Pkg. Qty. 7-pole
Red 1492-CJP2-7-RE 20
 Grey 1492-P6PD2E-3B3RE 50
Blue 1492-CJP2-8-B 20
8-pole
Specifications — Control Power Distribution Terminal Block Red 1492-CJP2-8-RE 20
Blue 1492-CJP2-9-B 20
Certifications /CSA IEC ATEX 9-pole
Red 1492-CJP2-9-RE 20
Voltage Rating 150V AC/DC 250V AC/DC 220V AC/DC
Blue 1492-CJP2-10-B 20
Maximum Current 13 A 16 A 13 A 10-pole
Red 1492-CJP2-10-RE 20
1.5 mm2 1.5 mm2
Wire Range (Rated
26…14 AWG
Cross Section) Blue 1492-CJP2-20-B 20
20-pole
Wire Strip Length 0.31 in. (12 mm) Red 1492-CJP2-20-RE 20
Density 87 pcs/ft (285 pcs/m) Blue 1492-CJP2-50-B 20
50-pole
Housing Temperature Red 1492-CJP2-50-RE 20
-76…266°F (-60…130 °C)
Range
Marking Systems
ClearPlot Basic Marker Cards 1492-M3X5 (100/card) 5 cards
Accessories Cat. No. Pkg. Qty.
ClearMultiprint Markers 1492-MT3X8 (1000/roll) 1 roll
Mounting Rails, End Barriers, End Anchors and Retainers
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Steel 199-DR1 10 pole center jumper, the catalog number will be 1492-CJP2-2.

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Wiring Diagram
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP6PD2-BRE 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50
IMPORTANT See page 68 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 49


Push-in Terminal Block Specifications

1492-P10PD3S-1B Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2-B 60
3-pole 1492-CJP3-3-B
4-pole 1492-CJP3-4-B
5-pole 1492-CJP3-5-B
6-pole 1492-CJP3-6-B
7-pole Blue 1492-CJP3-7-B
20
8-pole 1492-CJP3-8-B
9-pole 1492-CJP3-9-B
10-pole 1492-CJP3-10-B
20-pole 1492-CJP3-20-B
50-pole 1492-CJP3-50-B
Terminal Blocks—Dimensions (W x H x L): 10 x 54 x 89 mm Test Plugs
Color Cat. No. Pkg. Qty. Start Test Plug 1492-PTPS 50
Test Plugs
 Grey 1492-P10PD3S-1B 20 Test Plug 1492-P10TPE 50
Marking Systems(2)
Specifications — Control Power Distribution Terminal Block ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 600V AC/DC 800V AC/DC 690V AC/DC (1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
center jumper, the catalog number will be 1492-CJP3-2.
Maximum
51 A 57 A 45 A
Current (2) Use either two marker cards or two roll markers per terminal block.

Wire Range
(Rated Cross 20…6 AWG 10 mm2 10 mm2 Wiring Diagram
Section)
Wire Strip
0.71 (18 mm)
Length
Density 30 pcs/ft (100 pcs/m)
Housing
Temperature -76…266°F (-60…130 °C)
Range
IMPORTANT See page 72 for ferrule selection.
Accessories Cat. No. Pkg. Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

50 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P10PD3S-1RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2-RE 60
3-pole 1492-CJP3-3-RE
4-pole 1492-CJP3-4-RE
5-pole 1492-CJP3-5-RE
6-pole 1492-CJP3-6-RE
7-pole Red 1492-CJP3-7-RE
20
8-pole 1492-CJP3-8-RE
9-pole 1492-CJP3-9-RE
10-pole 1492-CJP3-10-RE
20-pole 1492-CJP3-20-RE
Terminal Blocks—Dimensions (W x H x L): 10 x 54 x 89 mm 50-pole 1492-CJP3-50-RE
Pkg. Test Plugs
Color Cat. No.
Qty.
Start Test Plug 1492-PTPS 50
 Grey 1492-P10PD3S-1RE 20 Test Plugs
1492-P10TPE 50
Test Plug
Marking Systems(2)
Specifications — Control Power Distribution Terminal Block
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Certifications /CSA IEC ATEX
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Voltage Rating 600V AC/DC 800V AC/DC 690V AC/DC
(1) Available in orange, to order remove the -RE suffix from the catalog number. Example for an orange 2-pole
Maximum center jumper, the catalog number will be 1492-CJP3-2.
Current 51 A 57 A 45 A
(2) Use either two marker cards or two roll markers per terminal block.
Wire Range
2 2
(Rated Cross 20…6 AWG 10 mm 10 mm
Section) Wiring Diagram
Wire Strip
Length 0.71 (18 mm)

Density 30 pcs/ft (100 pcs/m)


Housing
Temperature -76…266°F (-60…130 °C)
Range

IMPORTANT See page 72 for ferrule selection.


Accessories Cat. No. Pkg. Qty.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 51


Push-in Terminal Block Specifications

1492-PG10PD3S Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2-B 60
3-pole 1492-CJP3-3-B
4-pole 1492-CJP3-4-B
5-pole 1492-CJP3-5-B
6-pole 1492-CJP3-6-B
7-pole Blue 1492-CJP3-7-B
20
8-pole 1492-CJP3-8-B
9-pole 1492-CJP3-9-B
10-pole 1492-CJP3-10-B

Terminal Blocks—Dimensions (W x H x L): 10 x 54 x 89 mm 20-pole 1492-CJP3-20-B


50-pole 1492-CJP3-50-B
Pkg.
Color Cat. No.
Qty. Test Plugs

 Grey 1492-PG10PD3S 20
Test Plugs
Start Test Plug 1492-PTPS 50

Test Plug 1492-P10TPE 50


Specifications — Control Power Distribution with Grounding Terminal Block Marking Systems(2)
Certifications /CSA IEC ATEX ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Voltage Rating 600V AC/DC 800V AC/DC 690V AC/DC ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll

10 mm2 10 mm2
Wire Range (Rated (1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
20…6 AWG
Cross Section) center jumper, the catalog number will be 1492-CJP3-2.
Wire Strip Length 0.71 (18 mm) (2) Use either two marker cards or two roll markers per terminal block.

Density 30 pcs/ft (100 pcs/m)


Wiring Diagram
Housing -76…266°F (-60…130 °C)
Temperature Range

Accessories Cat. No. Pkg. Qty. FE


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10
IMPORTANT See page 72 for ferrule selection.
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

52 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P10PD3E- 5B Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2-B 60
3-pole 1492-CJP3-3-B
4-pole 1492-CJP3-4-B
5-pole 1492-CJP3-5-B
6-pole 1492-CJP3-6-B
7-pole Blue 1492-CJP3-7-B
20
8-pole 1492-CJP3-8-B
9-pole 1492-CJP3-9-B
10-pole 1492-CJP3-10-B
20-pole 1492-CJP3-20-B
50-pole 1492-CJP3-50-B
Marking Systems

Terminal Blocks—Dimensions (W x H x L): 5.1 x 54x 89 mm ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards

Pkg. ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll


Color Cat. No.
Qty. (1) Available in orange, to order remove the -B suffix from the catalog number. Example for an orange 2-pole
center jumper, the catalog number will be 1492-CJP3-2.
 Grey 1492-P10PD3E-5B 50

Wiring Diagram
Specifications — Control Power Distribution Terminal Block
Certifications /CSA IEC ATEX
Voltage Rating 600V AC/DC 800V AC/DC 690V AC/DC
Maximum Current 20 A 24 A 20 A
Wire Range (Rated 28…12 AWG 2.5 mm2 2.5 mm2
Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m) IMPORTANT See page 69 for ferrule selection.
Housing Temperature
Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 53


Push-in Terminal Block Specifications

1492-P10PD3E-5RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2-RE 60
3-pole 1492-CJP3-3-RE
4-pole 1492-CJP3-4-RE
5-pole 1492-CJP3-5-RE
6-pole 1492-CJP3-6-RE
7-pole Red 1492-CJP3-7-RE
20
8-pole 1492-CJP3-8-RE
9-pole 1492-CJP3-9-RE
10-pole 1492-CJP3-10-RE
20-pole 1492-CJP3-20-RE
50-pole 1492-CJP3-50-RE
Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Terminal Blocks—Dimensions (W x H x L): 5.1 x 54x 89 mm ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Pkg. (1) Available in orange, to order remove the -RE suffix from the catalog number. Example for an orange 2-pole
Color Cat. No. center jumper, the catalog number will be 1492-CJP3-2.
Qty.

 Grey 1492-P10PD3E-5RE 50
Wiring Diagram

Specifications — Control Power Distribution Terminal Block


Certifications /CSA IEC ATEX
Voltage Rating 600V AC/DC 800V AC/DC 690V AC/DC
Maximum Current 20 A 24 A 20 A IMPORTANT See page 69 for ferrule selection.
Wire Range (Rated 28…12 AWG 2.5 mm2 2.5 mm2
Cross Section)
Wire Strip Length 0.4 in. (10 mm)
Density 59 pcs/ft (196 pcs/m)
Housing Temperature
Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg. Qty.


Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

54 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P10PD3S-1B1RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP3-2-B 60
Red 1492-CJP3-2-RE 60
3-pole Blue 1492-CJP3-3-B 20
Red 1492-CJP3-3-RE 20
Blue 1492-CJP3-4-B 20
4-pole
Red 1492-CJP3-4-RE 20

5-pole Blue 1492-CJP3-5-B 20


Red 1492-CJP3-5-RE 20
Blue 1492-CJP3-6-B 20
6-pole
Red 1492-CJP3-6-RE 20
Blue 1492-CJP3-7-B 20
7-pole
Red 1492-CJP3-7-RE 20
Terminal Blocks—Dimensions (W x H x L): 10 x 54 x 94 mm
Blue 1492-CJP3-8-B 20
Color Cat. No. Pkg. Qty. 8-pole
Red 1492-CJP3-8-RE 20
 Grey 1492-P10PD3S-1B1RE 20
Blue 1492-CJP3-9-B 20
9-pole
Red 1492-CJP3-9-RE 20
Specifications — Control Power Distribution Terminal Block
Blue 1492-CJP3-10-B 20
Certifications /CSA IEC ATEX 10-pole
Red 1492-CJP3-10-RE 20
Voltage Rating 600V AC/DC 500V AC/DC 352V AC/DC
Blue 1492-CJP3-20-B 20
Maximum Current 51 A 41 A 45 A 20-pole
Red 1492-CJP3-20-RE 20
Wire Range (Rated 20…6 AWG 10 mm2 10 mm2 Blue 1492-CJP3-50-B 20
Cross Section)
50-pole
Wire Strip Length 0.71 in. (18 mm) Red 1492-CJP3-50-RE 20

Density 30 pcs/ft (100 pcs/m) Test Plugs

Housing Start Test Plug 1492-PTPS 50


Temperature Range -76…266°F (-60…130 °C) Test Plugs
Test Plug 1492-P10TPE 50
(2)
Marking Systems
Accessories Cat. No. Pkg. Qty.
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Mounting Rails, End Barriers, End Anchors and Retainers
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Steel 199-DR1 10
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Aluminum 1492-DR5 10 pole center jumper, the catalog number will be 1492-CJP3-2.
Mounting Rail
1 m Symmetrical DIN 1492-DR6 2 (2) Use either two marker cards or two roll markers per terminal block.
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Wiring Diagram
End Barriers Grey 1492-EBP10PD3-BRE 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
IMPORTANT See page 72 for ferrule selection.
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 55


Push-in Terminal Block Specifications

1492-P10PD3S-1RE1G Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP3-2-B 60
Red 1492-CJP3-2-RE 60
3-pole Blue 1492-CJP3-3-B 20
Red 1492-CJP3-3-RE 20
Blue 1492-CJP3-4-B 20
4-pole
Red 1492-CJP3-4-RE 20

5-pole Blue 1492-CJP3-5-B 20


Red 1492-CJP3-5-RE 20
Blue 1492-CJP3-6-B 20
6-pole
Terminal Blocks—Dimensions (W x H x L): 10 x 54 x 94 mm Red 1492-CJP3-6-RE 20
Blue 1492-CJP3-7-B 20
Color Cat. No. Pkg. Qty. 7-pole
Red 1492-CJP3-7-RE 20
 Grey 1492-P10PD3S-1RE1G 20
Blue 1492-CJP3-8-B 20
8-pole
Specifications — Control Power Distribution with Grounding Terminal Block Red 1492-CJP3-8-RE 20
Blue 1492-CJP3-9-B 20
Certifications /CSA IEC ATEX 9-pole
Red 1492-CJP3-9-RE 20
Voltage Rating 600V AC/DC 500V AC/DC 352V AC/DC
Blue 1492-CJP3-10-B 20
Maximum Current 51 A 41 A 45 A 10-pole
Red 1492-CJP3-10-RE 20
10 mm2 10 mm2
Wire Range (Rated
20…6 AWG
Cross Section) Blue 1492-CJP3-20-B 20
20-pole
Wire Strip Length 0.71 in. (18 mm) Red 1492-CJP3-20-RE 20
Density 30 pcs/ft (100 pcs/m) Blue 1492-CJP3-50-B 20
50-pole
Housing Red 1492-CJP3-50-RE 20
-76…266°F (-60…130 °C)
Temperature Range
Test Plugs

Start Test Plug 1492-PTPS 50


Accessories Cat. No. Pkg. Qty. Test Plugs
Test Plug 1492-P10TPE 50
Mounting Rails, End Barriers, End Anchors and Retainers (2)
Marking Systems
Steel 199-DR1 10
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Mounting Rail Aluminum 1492-DR5 10
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
Angled (Steel) 1492-DR7 2 pole center jumper, the catalog number will be 1492-CJP3-2.
End Barriers Grey 1492-EBP10PD3-BRE 20 (2) Use either two marker cards or two roll markers per terminal block.

End Retainer 1492-ERL35 20


Wiring Diagram
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50 FE

IMPORTANT See page 72 for ferrule selection.

56 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P10PD3E-2B2RE Accessories Cat. No. Pkg. Qty.


Center Jumpers(1)
2-pole Blue 1492-CJP3-2-B 60
Red 1492-CJP3-2-RE 60
3-pole Blue 1492-CJP3-3-B 20
Red 1492-CJP3-3-RE 20
Blue 1492-CJP3-4-B 20
4-pole
Red 1492-CJP3-4-RE 20

5-pole Blue 1492-CJP3-5-B 20


Red 1492-CJP3-5-RE 20
Blue 1492-CJP3-6-B 20
6-pole
Red 1492-CJP3-6-RE 20
Blue 1492-CJP3-7-B 20
7-pole
Red 1492-CJP3-7-RE 20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 54 x 94 mm
Blue 1492-CJP3-8-B 20
Color Cat. No. Pkg. Qty. 8-pole
Red 1492-CJP3-8-RE 20
 Grey 1492-P10PD3E-2B2RE 20 Blue 1492-CJP3-9-B 20
9-pole
Red 1492-CJP3-9-RE 20
Specifications — Control Power Distribution Terminal Block Blue 1492-CJP3-10-B 20
10-pole
Certifications /CSA IEC ATEX Red 1492-CJP3-10-RE 20
Voltage Rating 150V AC/DC 500V AC/DC 352V AC/DC Blue 1492-CJP3-20-B 20
20-pole
Current Rating 20 A 24 A 20 A Red 1492-CJP3-20-RE 20

Wire Range Blue 1492-CJP3-50-B 20


28…12 AWG 2.5 mm2 2.5 mm2 50-pole
(Rated Cross Section) Red 1492-CJP3-50-RE 20
Wire Strip Length 0.4 in (10 mm) Marking Systems
Density 59 pcs/ft (196 pcs/m) ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Housing Temperature ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Range -76…266°F (-60…130 °C)
(1) Available in orange, to order remove the -B or RE suffix from the catalog number. Example for an orange 2-
pole center jumper, the catalog number will be 1492-CJP3-2.
Accessories Cat. No. Pkg. Qty.
Mounting Rails, End Barriers, End Anchors and Retainers Wiring Diagram
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
End Barriers Grey 1492-EBP10PD3-BRE 20 IMPORTANT See page 69 for ferrule selection.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 57


Push-in Terminal Block Specifications

Single-level Flex Plug-in Terminal Blocks Accessories Cat. No. Pkg Qty.
Center Jumpers(1)
1492-P31P 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
50-pole 1492-CJP3-50
Plugs and Plug Accessories
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5x 55mm
Grey 1492-P3SSTP
Color Cat. No. Pkg. Qty.
Start Plug(2) Blue 1492-P3SSTP-B
 Grey 1492-P31P 100
Green 1492-P3SSTP-G
 Blue 1492-P31P-B 100
Grey 1492-P3MSTP
Middle Plug Blue 1492-P3MSTP-B
Specifications — Single-level Flex Plug-in Terminal Block
Green 1492-P3MSTP-G
Certifications /CSA IEC ATEX 50
Grey 1492-P3ESTP
Voltage Rating 600V AC/DC 800V AC/DC 800V AC/DC End Plug
Blue 1492-P3ESTP-B
Maximum Current 20 A 24 A 20 A
Green 1492-P3ESTP-G
Wire Range 2 2
28…12 AWG 2.5 mm 2.5 mm Plug End Barrier Grey 1492-P3STPEB
(Rated Cross Section)
Coding Element Orange 1492-P3STPCE
Wire Strip Length 0.4 in (10 mm)
Protective Cover Orange 1492-P3STPPC
Density 59 pcs/ft (196 pcs/m)
Locking Element Orange 1492-P3STPLE 25
Housing Temperature Range -76…266°F (-60…130 °C)
Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Accessories Cat. No. Pkg Qty.
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Mounting Rails, End Barriers, End Anchors and Retainers
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Steel 199-DR1 10 listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-DR5 10 1492-CJP3-2-RE.
Mounting Rail Aluminum
1 m Symmetrical DIN (2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.
Hi-Rise (Aluminum) 1492-DR6 2

Angled (Steel) 1492-DR7 2


Wiring Diagram
Grey 1492-EBP3 50
End Barriers Blue 1492-EBP3-B 50
Yellow 1492-EBP3-Y 50
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100 IMPORTANT See page 69 for ferrule selection.
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

58 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PG31P Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20

Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 55 mm 50-pole 1492-CJP3-50

Color Cat. No. Pkg. Qty. Plugs and Plug Accessories


Grey 1492-P3SSTP
 Green/Yellow 1492-PG31P 100
Start Plug(2) Blue 1492-P3SSTP-B

Specifications — Single-level Flex Plug-in Grounding Terminal Block Green 1492-P3SSTP-G

Certifications /CSA IEC ATEX Grey 1492-P3MSTP


Middle Plug Blue 1492-P3MSTP-B
Maximum Voltage 600V AC/DC 800V AC/DC 800V AC/DC
Green 1492-P3MSTP-G
Wire Range (Rated Cross Section) 28…12 AWG 2.5 mm2 2.5 mm2 50
Grey 1492-P3ESTP
Wire Strip Length 0.4 in (10 mm) End Plug
Blue 1492-P3ESTP-B
Density 59 pcs/ft (196 pcs/m)
Green 1492-P3ESTP-G
Housing Temperature Range -76…266°F (-60…130 °C)
Plug End Barrier Grey 1492-P3STPEB
Coding Element Orange 1492-P3STPCE
Accessories Cat. No. Pkg Qty.
Protective Cover Orange 1492-P3STPPC
Mounting Rails, End Barriers, End Anchors and Retainers
Locking Element Orange 1492-P3STPLE 25
Steel 199-DR1 10
Marking Systems
Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Hi-Rise (Aluminum) 1492-DR6 2
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Angled (Steel) 1492-DR7 2
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Grey 1492-EBP3 50 listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
End Barriers Blue 1492-EBP3-B 50 1492-CJP3-2-RE.
(2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.
Yellow 1492-EBP3-Y 50
End Retainer 1492-ERL35 20
Wiring Diagram
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 69 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 59


Push-in Terminal Block Specifications

Double-level Flex Plug-in Terminal Blocks Accessories Cat. No. Pkg Qty.
Center Jumpers(1)
1492-PD32P
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
50-pole 1492-CJP3-50
Plugs and Plug Accessories
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 91 mm
Grey 1492-P3SSTP
Pkg.
Color Cat. No. Start Plug(2)
Qty. Blue 1492-P3SSTP-B

 Grey 1492-PD32P 50 Green 1492-P3SSTP-G

 Blue 1492-PD32P-B 50 Grey 1492-P3MSTP


Middle Plug Blue 1492-P3MSTP-B
Specifications — Double-level Flex Plug-in Terminal Block Green 1492-P3MSTP-G
50
Certifications /CSA IEC ATEX Grey 1492-P3ESTP
End Plug
Voltage Rating 600V AC/DC 800V AC/DC 800V AC/DC Blue 1492-P3ESTP-B
Maximum Green 1492-P3ESTP-G
Current 20 A 24 A 20 A
Plug End Barrier Grey 1492-P3STPEB
Wire Range
Coding Element Orange 1492-P3STPCE
(Rated Cross 28…12 AWG 2.5 mm2 2.5 mm 2
Section) Protective Cover Orange 1492-P3STPPC
Wire Strip 0.4 in (10 mm) Locking Element Orange 1492-P3STPLE 25
Length
Marking Systems
Density 59 pcs/ft (196 pcs/m)
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Housing
Temperature -76…266°F (-60…130 °C) ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Range
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
Accessories Cat. No. Pkg Qty.
(2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.
Mounting Rails, End Barriers, End Anchors and Retainers

Steel 199-DR1 10 Wiring Diagram


Mounting Rail Aluminum 1492-DR5 10
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20 IMPORTANT See page 69 for ferrule selection.
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

60 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PD32PC Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 91 mm 50-pole 1492-CJP3-50
Pkg. Plugs and Plug Accessories
Color Cat. No.
Qty.
Grey 1492-P3SSTP
 Grey 1492-PD32PC 50
Start Plug(2) Blue 1492-P3SSTP-B
 Blue 1492-PD32PC-B 50
Green 1492-P3SSTP-G
Grey 1492-P3MSTP
Specifications — Double-level Flex Plug-in Terminal Block
Middle Plug Blue 1492-P3MSTP-B
Certifications /CSA IEC ATEX
Green 1492-P3MSTP-G
Voltage Rating 600V AC/DC 800V AC/DC 800V AC/DC 50
Grey 1492-P3ESTP
Maximum End Plug
Current 20 A 24 A 20 A Blue 1492-P3ESTP-B

Wire Range Green 1492-P3ESTP-G


(Rated Cross 28…12 AWG 2.5 mm2 2.5 mm2 Plug End Barrier Grey 1492-P3STPEB
Section)
Coding Element Orange 1492-P3STPCE
Wire Strip 0.4 in (10 mm)
Length Protective Cover Orange 1492-P3STPPC
Density 59 pcs/ft (196 pcs/m) Locking Element Orange 1492-P3STPLE 25
Housing Marking Systems
Temperature -76…266°F (-60…130 °C)
Range ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll

Accessories Cat. No. Pkg Qty. (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Mounting Rails, End Barriers, End Anchors and Retainers 1492-CJP3-2-RE.
Steel 199-DR1 10 (2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN Wiring Diagram
Hi-Rise (Aluminum) 1492-DR6 2

Angled (Steel) 1492-DR7 2


Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
IMPORTANT See page 69 for ferrule selection.
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 61


Push-in Terminal Block Specifications

1492-PDG32P Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 91 mm 50-pole 1492-CJP3-50
Pkg. Plugs and Plug Accessories
Color Cat. No.
Qty.
Grey 1492-P3SSTP
 Grey 1492-PDG32P 50
Start Plug(2) Blue 1492-P3SSTP-B
Green 1492-P3SSTP-G
Specifications — Double-level Flex Plug-in with Grounding Terminal Block
Grey 1492-P3MSTP
Certifications /CSA IEC ATEX
Middle Plug Blue 1492-P3MSTP-B
Voltage Rating 600V AC/DC 800V AC/DC 800V AC/DC
Green 1492-P3MSTP-G
Maximum 50
Current 20 A 24 A 20 A Grey 1492-P3ESTP
End Plug
Wire Range Blue 1492-P3ESTP-B
(Rated Cross 28…12 AWG 2.5 mm2 2.5 mm2 Green 1492-P3ESTP-G
Section)
Plug End Barrier Grey 1492-P3STPEB
Wire Strip 0.4 in (10 mm)
Length Coding Element Orange 1492-P3STPCE
Density 59 pcs/ft (196 pcs/m) Protective Cover Orange 1492-P3STPPC
Housing Locking Element Orange 1492-P3STPLE 25
Temperature -76…266°F (-60…130 °C)
Range Marking Systems
ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards

Accessories Cat. No. Pkg Qty. ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll

Mounting Rails, End Barriers, End Anchors and Retainers (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Steel 199-DR1 10 1492-CJP3-2-RE.

Mounting Rail Aluminum 1492-DR5 10 (2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Wiring Diagram
Angled (Steel) 1492-DR7 2
Grey 1492-EBPD3 20
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
IMPORTANT See page 69 for ferrule selection.
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

62 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-PDG32PC Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
Terminal Blocks—Dimensions (W x H x L): 5.1 x 50.5 x 91 mm 20-pole 1492-CJP3-20
Color Cat. No. Pkg. Qty. 50-pole 1492-CJP3-50
 Green/Yellow 1492-PDG32PC 50 Plugs and Plug Accessories
Grey 1492-P3SSTP
Specifications —Double-level Flex Plug-in with Grounding Terminal Block Start Plug(2) Blue 1492-P3SSTP-B
Certifications /CSA IEC ATEX Green 1492-P3SSTP-G
Voltage Rating 600V AC/DC 800V AC/DC 800V AC/DC Grey 1492-P3MSTP
Wire Range Middle Plug Blue 1492-P3MSTP-B
(Rated Cross 28…12 AWG 2.5 mm2 2.5 mm2
Section) Green 1492-P3MSTP-G
50
Wire Strip Grey 1492-P3ESTP
0.4 in (10 mm) End Plug
Length
Blue 1492-P3ESTP-B
Density 59 pcs/ft (196 pcs/m)
Green 1492-P3ESTP-G
Housing Plug End Barrier Grey 1492-P3STPEB
Temperature -76…266°F (-60…130 °C)
Range Coding Element Orange 1492-P3STPCE
Protective Cover Orange 1492-P3STPPC
Accessories Cat. No. Pkg Qty. Locking Element Orange 1492-P3STPLE 25
Mounting Rails, End Barriers, End Anchors and Retainers Marking Systems
Steel 199-DR1 10 ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Mounting Rail Aluminum 1492-DR5 10 ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum) (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
1492-DR7 2 listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Angled (Steel) 1492-CJP3-2-RE.
Grey 1492-EBPD3 20
(2) Assembly option available, order catalog number: 1492-P3STP for (1) start plug and (1) plug end barrier.
End Barriers Blue 1492-EBPD3-B 20
Yellow 1492-EBPD3-Y 20 Wiring Diagram
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 69 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 63


Push-in Terminal Block Specifications

Accessory Plug-in Terminal Blocks Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
1492-P3P 2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
10-pole 1492-CJP3-10
20-pole 1492-CJP3-20
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 77.5mm 50-pole 1492-CJP3-50
Pkg. Disconnect, Component, and Fuse Plugs
Color Cat. No.
Qty.
Disconnect Plug 1492-DPL 50
 Grey 1492-P3P 50
Component Plug 1492-CPL 50
Without blown fuse indicator 1492-FPK2 20
Specifications — Accessory Plug-in Terminal Block
Certifications /CSA IEC
10…36V blown fuse indicator 1492-FPK224 20

Voltage Rating 300V AC/DC 500V AC/DC Fuse Plugs 35…75V blown fuse indicator 1492-FPK248 20
Maximum Current 20 A 20 A 60…150V blown fuse indicator 1492-FPK2120 20
2 140…250V blown fuse indicator 1492-FPK2250 20
Wire Range (Rated Cross Section) 28…12 AWG 2.5 mm
Wire Strip Length 0.4 in. (10 mm) Test Plugs
Density 59 pcs/ft (196 pcs/m) Start Test Plug 1492-PTPS 50
Test Plugs
Housing Temperature Range -76…266°F (-60…130 °C) Test Plug 1492-P3TPE 50
Marking Systems
Accessories Cat. No. Pkg Qty. ClearPlot Basic Marker Cards 1492-MR5X8 (120/ 5 cards
Mounting Rails, End Barriers, End Anchors and Retainers ClearMultiprint Markers 1492-MT5X8 (800/ 1 roll

Steel 199-DR1 10 (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
Mounting Rail Aluminum 1492-DR5 10 1492-CJP3-2-RE.
1 m Symmetrical
DIN Hi-Rise (Aluminum) 1492-DR6 2

Angled (Steel) 1492-DR7 2 Wiring Diagram


Grey 1492-EBP3Q 20
End Barriers Blue 1492-EBP3Q-B 20
Yellow 1492-EBP3Q-Y 20
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100
IMPORTANT See page 69 for ferrule selection.
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

64 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

1492-P3PT Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 84.5mm 10-pole 1492-CJP3-10

Pkg. 20-pole 1492-CJP3-20


Color Cat. No.
Qty. 50-pole 1492-CJP3-50
 Grey 1492-P3PT 50 Disconnect, Component, and Fuse Plugs
Disconnect Plug 1492-DPL 50
Specifications — Accessory Plug-in Terminal Block
Component Plug 1492-CPL 50
Certifications /CSA IEC
Without blown fuse
Voltage Rating 300V AC/DC 500V AC/DC indicator 1492-FPK2 20

Maximum Current 20 A 20 A 10…36V blown fuse


indicator 1492-FPK224 20
2
Wire Range (Rated Cross Section) 28…12 AWG 2.5 mm
35…75V blown fuse
Wire Strip Length 0.4 in. (10 mm) Fuse Plugs
indicator 1492-FPK248 20
Density 59 pcs/ft (196 pcs/m) 60…150V blown
fuse indicator 1492-FPK2120 20
Housing Temperature Range -76…266°F (-60…130 °C)
140…250V blown
fuse indicator 1492-FPK2250 20
Accessories Cat. No. Pkg Qty.
Test Plugs
Mounting Rails, End Barriers, End Anchors and Retainers
Start Test Plug 1492-PTPS 50
199-DR1 10 Test Plugs
Steel 1492-P3TPE 50
Test Plug
Mounting Rail Aluminum 1492-DR5 10
Marking Systems
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum) ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Angled (Steel) 1492-DR7 2
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
Grey 1492-EBPKD3T 50
End Barriers (1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Blue 1492-EBPKD3T-B 50 listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP3-2-RE.
End Retainer 1492-ERL35 20
Normal Duty 1492-EAJ35 100 Wiring Diagram
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 69 for ferrule selection.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 65


Push-in Terminal Block Specifications

1492-P3PQ Accessories Cat. No. Pkg Qty.


Center Jumpers(1)
2-pole 1492-CJP3-2 60
3-pole 1492-CJP3-3
4-pole 1492-CJP3-4
5-pole 1492-CJP3-5
6-pole 1492-CJP3-6
7-pole Orange 1492-CJP3-7
20
8-pole 1492-CJP3-8
9-pole 1492-CJP3-9
Terminal Blocks—Dimensions (W x H x L): 5.1 x 36.5 x 96mm 10-pole 1492-CJP3-10

Pkg. 20-pole 1492-CJP3-20


Color Cat. No.
Qty. 50-pole 1492-CJP3-50
 Grey 1492-P3PQ 50 Disconnect, Component, and Fuse Plugs
Disconnect Plug 1492-DPL 50
Specifications — Accessory Plug-in Terminal Block
Component Plug 1492-CPL 50
Certifications /CSA IEC
Without blown fuse
Voltage Rating 300V AC/DC 500V AC/DC indicator 1492-FPK2 20

Maximum Current 20 A 20 A 10…36V blown fuse


indicator 1492-FPK224 20
2
Wire Range (Rated Cross Section) 28…12 AWG 2.5 mm
35…75V blown fuse
Wire Strip Length 0.4 in. (10 mm) Fuse Plugs
indicator 1492-FPK248 20
Density 59 pcs/ft (196 pcs/m) 60…150V blown
fuse indicator 1492-FPK2120 20
Housing Temperature Range -76…266°F (-60…130 °C)
140…250V blown
fuse indicator 1492-FPK2250 20
Accessories Cat. No. Pkg Qty.
Test Plugs
Mounting Rails, End Barriers, End Anchors and Retainers
Start Test Plug 1492-PTPS 50
199-DR1 10 Test Plugs
Steel 1492-P3TPE 50
Test Plug
Mounting Rail Aluminum 1492-DR5 10
Marking Systems
1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum) ClearPlot Basic Marker Cards 1492-MR5X8 (120/card) 5 cards
Angled (Steel) 1492-DR7 2
ClearMultiprint Markers 1492-MT5X8 (800/roll) 1 roll
End Retainer 1492-ERL35 20
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
Grey 1492-EBPKD3Q 50 listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
End Barriers 1492-CJP3-2-RE.
Blue 1492-EBPKD3Q-B 50
Normal Duty 1492-EAJ35 100 Wiring Diagram
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50

IMPORTANT See page 69 for ferrule selection.

66 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Fuse Terminal Blocks

Fuse Terminal Blocks Accessories Cat. No. Pkg Qty.


Normal Duty 1492-EAJ35 100
End Anchor DIN Rail Heavy Duty 1492-EAHJ35 50
Normal Duty 1492-EAP35 50
Center Jumpers(1)
2-pole 1492-CJP4-2 60
3-pole 1492-CJP4-3
4-pole 1492-CJP4-4
5-pole 1492-CJP4-5
6-pole 1492-CJP4-6
Orange 20
Terminal Blocks—Dimensions (W x H x L): 6.1 x 69 x 74 mm 7-pole 1492-CJP4-7
8-pole 1492-CJP4-8
Color Includes LED for Cat. No. Pkg.
Blown Fuse Qty. 9-pole 1492-CJP4-9
Indication 10-pole 1492-CJP4-10
No 1492-PFB4 50-pole 1492-CJP4-50 5
1492-PFB424 Test Plugs
 Black 1492-PFB448 50
Start Test Plug 1492-PTPS 50
Yes Test Plugs
1492-PFB4120 Test Plug 1492-P4TPE 50
1492-PFB4250 Marking Systems
ClearPlot Basic Marker Cards 1492-MR6X8 (120/card) 5 cards
Specifications — Single-level Feed-through Terminal Block
ClearMultiprint Markers 1492-MT6X8 (600/roll) 1 roll
Certifications /CSA IEC ATEX
(1) Available in orange as standard, to order other colors add the appropriate suffix to the catalog number
1492-PFB4 300V AC/DC 250V AC/DC 250V AC/DC listed: Blue =B, Red = RE. Example for a red 2-pole center jumper, the catalog number will be
1492-CJP4-2-RE.
1492-PFB424 10…36V AC/DC Wiring Diagram
Voltage
Rating 1492-PFB448 30…70V AC/DC No Blown Fuse Indication
1492-PFB4120 60…150V AC/DC

1492-PFB4250 100…250V AC/DC


Maximum Current 10 A 6.3 A 6.3 A
Wire Range (Rated Cross Section) 26…10 AWG 4 mm2 4 mm2
Wire Strip Length 0.47 in. (12 mm) With Blown Fuse Indication
Density 49 pcs/ft (163 pcs/m)
Housing Temperature Range -76…266°F (-60…130 °C)

Accessories Cat. No. Pkg Qty.


Mounting Rails, End Barriers, End Anchors and Retainers
IMPORTANT See page 70 for ferrule selection.
Steel 199-DR1 10

Mounting Rail Aluminum 1492-DR5 10


1 m Symmetrical DIN 1492-DR6 2
Hi-Rise (Aluminum)
Angled (Steel) 1492-DR7 2
Grey 1492-EBP4T 20
End Barriers Blue 1492-EBP4T-B 20
Yellow 1492-EBP4T-Y 50
End Retainer 1492-ERL35 20

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 67


Push-in Terminal Block Specifications

Ferrule Selection
Panduit Ferrules and Tools for use with 1492-P2 Terminal Blocks
Uninsulated Ferrule

Loose Piece Ferrules Hand Crimp Tools for Loose Piece Ferrules (1)
for use with
Wire Size (AWG) Hand Crimp Tools 1 2 3 4 5 6
24 F73-5-M ● ●
24-22 F74-5-M ● ●
22-20 F75-6-M ● ● ● ● ● ●
18 F76-6-M ● ● ● ● ● ●
16 F78-7-M ● ● ● ● ● ●
14 F80-7-M ● ● ● ●

Insulated Ferrule

Continuous Reeled Ferrules for use Hand Crimp Tools for Loose Piece Ferrules(1)
Wire Size Ferrule Insulation with Loose Piece Ferrules for use with
(AWG) Color CP-881 Automated Crimp Tool Hand Crimp Tools 1 2 3 4 5 6
26 Grey — FSD72-6-D ● ●
24 Yellow — FSD73-6-D ● ●
24-22 Turquoise — FSD74-6-D ● ●
22-20 White FSD75-8-K FSD75-6-D ● ● ● ● ● ●
18 Grey FSD76-8-K FSD76-6-D ● ● ● ● ● ●
16 Black FSD78-8-K FSD78-6-D ● ● ● ●
14 Blue — FSD80-12-D ● ● ● ●

Twin Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Loose Piece Ferrules for use with
Wire Size (AWG) Ferrule Insulation Color Hand Crimp Tools 1 2 3 4 5 6
16 Black FTD78-12-D ● ● ●

(1) Hand Crimp Tool Reference


Reference Number 1 2 3 4 5 6
Hand Crimp Tool Part No. CT-1002 CT-1003 CT-1090 CT-1123 CT-1160 CT-1170
Crimp Shape Trapezoid Trapezoid Trapezoid Square Hexagon Square
Shape Reference

IMPORTANT For more information on Panduit ferrules and tools, visit panduit.com.

68 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Panduit Ferrules and Tools for use with 1492-P3 Terminal Blocks
Uninsulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules (1)


Wire Size (AWG) Loose Piece Ferrules for use with Hand Crimp Tools 1 2 3 4 5 6
24 F73-5-M ● ●
24-22 F74-5-M ● ●
22-20 F75-6-M ● ● ● ● ● ●
18 F76-6-M ● ● ● ● ● ●
16 F78-7-M ● ● ● ● ● ●
14 F80-7-M ● ● ● ●
12 F81-9-M ● ●

Insulated Ferrule

Continuous Reeled Ferrules for use Hand Crimp Tools for Loose Piece Ferrules(1)
Wire Size Ferrule Insulation with Loose Piece Ferrules for use with
(AWG) Color CP-881 Automated Crimp Tool Hand Crimp Tools 1 2 3 4 5 6
26 Grey — FSD72-6-D ● ●
24 Yellow — FSD73-6-D ● ●
24-22 Turquoise — FSD74-6-D ● ●
22-20 White FSD75-8-K FSD75-6-D ● ● ● ● ● ●
18 Grey FSD76-8-K FSD76-6-D ● ● ● ● ● ●
16 Black FSD78-8-K FSD78-6-D ● ● ● ●
14 Blue FSD80-8-DK FSD80-12-D ● ● ● ●
12 Grey — FSD81-10-D ● ● ● ●

Twin Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Loose Piece Ferrules for use with
Wire Size (AWG) Ferrule Insulation Color Hand Crimp Tools 1 2 3 4 5 6
22 White FTD75-8-D ● ● ● ● ● ●
20 Grey FTD76-8-D ● ● ● ● ● ●
18 Red FTD77-8-D ● ● ● ● ● ●

(1) Hand Crimp Tool Reference


Reference Number 1 2 3 4 5 6
Hand Crimp Tool Part No. CT-1002 CT-1003 CT-1090 CT-1123 CT-1160 CT-1170
Crimp Shape Trapezoid Trapezoid Trapezoid Square Hexagon Square
Shape Reference

IMPORTANT For more information on Panduit ferrules and tools, visit panduit.com.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 69


Push-in Terminal Block Specifications

Panduit Ferrules and Tools for use with 1492-P4 Terminal Blocks
Uninsulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules (1)


Wire Size (AWG) Loose Piece Ferrules for use with Hand Crimp Tools 1 2 3 4 5 6
24 F73-5-M ● ●
24-22 F74-5-M ● ●
22-20 F75-6-M ● ● ● ● ● ●
18 F76-6-M ● ● ● ● ● ●
16 F78-7-M ● ● ● ● ● ●
14 F80-7-M ● ● ● ●
12 F81-9-M ● ● ● ●
10 F82-12-M ● ● ● ●

Insulated Ferrule

Continuous Reeled Ferrules for use Hand Crimp Tools for Loose Piece Ferrules(1)
Wire Size Ferrule Insulation with Loose Piece Ferrules for use with
(AWG) Color CP-881 Automated Crimp Tool Hand Crimp Tools 1 2 3 4 5 6
26 Grey — FSD72-6-D ● ●
24 Yellow — FSD73-6-D ● ●
24-22 Turquoise — FSD74-6-D ● ●
22-20 White FSD75-8-K FSD75-6-D ● ● ● ● ● ●
18 Grey FSD76-8-K FSD76-6-D ● ● ● ● ● ●
16 Black FSD78-8-K FSD78-6-D ● ● ● ●
14 Blue FSD80-8-DK FSD80-12-D ● ● ● ●
12 Grey — FSD81-10-D ● ● ● ●
10 Yellow — FSD82-12-C ● ● ● ●

Twin Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Loose Piece Ferrules for use with
Wire Size (AWG) Ferrule Insulation Color Hand Crimp Tools 1 2 3 4 5 6
22 White FTD75-8-D ● ● ● ● ● ●
20 Grey FTD76-8-D ● ● ● ● ● ●
18 Red FTD77-8-D ● ● ● ● ● ●

(1) Hand Crimp Tool Reference


Reference Number 1 2 3 4 5 6
Hand Crimp Tool Part No. CT-1002 CT-1003 CT-1090 CT-1123 CT-1160 CT-1170
Crimp Shape Trapezoid Trapezoid Trapezoid Square Hexagon Square
Shape Reference

IMPORTANT For more information on Panduit ferrules and tools, visit panduit.com.

70 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Panduit Ferrules and Tools for use with 1492-P6 Terminal Blocks
Uninsulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules (1)


Wire Size (AWG) Loose Piece Ferrules for use with Hand Crimp Tools 1 2 3 4 5 6
22-20 F75-6-M ● ● ● ● ● ●
18 F76-6-M ● ● ● ● ● ●
16 F78-7-M ● ● ● ● ● ●
14 F80-7-M ● ● ● ●
12 F81-9-M ● ● ● ●
10 F82-12-M ● ● ● ●
8 F83-12-D ● ● ● ●

Insulated Ferrule

Continuous Reeled Ferrules for use Hand Crimp Tools for Loose Piece Ferrules(1)
Wire Size Ferrule Insulation with Loose Piece Ferrules for use with
(AWG) Color CP-881 Automated Crimp Tool Hand Crimp Tools 1 2 3 4 5 6
22-20 White FSD75-8-K FSD75-6-D ● ● ● ● ● ●
18 Grey FSD76-8-K FSD76-6-D ● ● ● ● ● ●
16 Black FSD78-8-K FSD78-6-D ● ● ● ●
14 Blue FSD80-8-DK FSD80-12-D ● ● ● ●
12 Grey — FSD81-10-D ● ● ● ●
10 Yellow — FSD82-12-C ● ● ● ●

Twin Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Loose Piece Ferrules for use with
Wire Size (AWG) Ferrule Insulation Color Hand Crimp Tools 1 2 3 4 5 6
22 White FTD75-8-D ● ● ● ● ● ●
20 Grey FTD76-8-D ● ● ● ● ● ●
18 Red FTD77-8-D ● ● ● ● ● ●
16 Black FTD78-8-D ● ● ● ● ● ●

(1) Hand Crimp Tool Reference


Reference Number 1 2 3 4 5 6
Hand Crimp Tool Part No. CT-1002 CT-1003 CT-1090 CT-1123 CT-1160 CT-1170
Crimp Shape Trapezoid Trapezoid Trapezoid Square Hexagon Square
Shape Reference

IMPORTANT For more information on Panduit ferrules and tools, visit panduit.com.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 71


Push-in Terminal Block Specifications

Panduit Ferrules and Tools for use with 1492-P10 Terminal Blocks
Uninsulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules (1)


Wire Size (AWG) Loose Piece Ferrules for use with Hand Crimp Tools 1 2 3 4 5 6 7
22-20 F75-6-M ● ● ● ● ● ●
18 F76-6-M ● ● ● ● ● ●
16 F78-7-M ● ● ● ● ● ●
14 F80-7-M ● ● ● ●
12 F81-9-M ● ● ● ●
10 F82-10-M ● ● ● ●
8 F83-12-D ● ● ●
6 F84-12-TL ●
Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Wire Size Ferrule Insulation Continuous Reeled Ferrules for use Loose Piece Ferrules for use
(AWG) Color with CP-881 Automated Crimp Tool with Hand Crimp Tools 1 2 3 4 5 6 7
22-20 White FSD75-8-K FSD75-6-D ● ● ● ● ● ●
18 Grey FSD76-8-K FSD76-6-D ● ● ● ● ● ●
16 Black FSD78-8-K FSD78-6-D ● ● ● ●
14 Blue — FSD80-12-D ● ● ● ●
12 Grey — FSD81-10-D ● ● ● ●
10 Yellow — FSD82-12-C ● ● ● ●
8 Red — FSD83-12-C ● ● ●
6 Blue — FSD84-12-C ●
Twin Insulated Ferrule

Hand Crimp Tools for Loose Piece Ferrules(1)


Wire Size Loose Piece Ferrules for use with
(AWG) Ferrule Insulation Color Hand Crimp Tools 1 2 3 4 5 6
22 White FTD75-8-D ● ● ● ● ● ●
20 Grey FTD76-8-D ● ● ● ● ● ●
18 Red FTD77-8-D ● ● ● ● ● ●
16 Black FTD78-8-D ● ● ● ● ● ●
14 Blue FTD80-10-TL ● ● ● ● ● ●
12 Grey FTD81-12-C ● ● ● ● ● ●

(1) Hand Crimp Tool Reference


Reference Number 1 2 3 4 5 6 7
Hand Crimp Tool Part No. CT-1002 CT-1003 CT-1090 CT-1123 CT-1160 CT-1170 CT-1004
Crimp Shape Trapezoid Trapezoid Trapezoid Square Hexagon Square Trapezoid
Shape Reference

IMPORTANT For more information on Panduit ferrules and tools, visit panduit.com.

72 Rockwell Automation Publication 1492-TD017B-EN-P - October 2018


Push-in Terminal Block Specifications

Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
Push-in Terminal Blocks Product Profile, publication 1492-PP014 Provides features and benefits, offering and basic specifications.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

You can view or download publications at http://www.rockwellautomation.com/global/literature-library/


overview.page.

Rockwell Automation Publication 1492-TD017B-EN-P - October 2018 73


Rockwell Automation Support
Use the following resources to access support information.

Knowledgebase Articles, How-to Videos, FAQs, Chat,


Technical Support Center www.rockwellautomation.com/knowledgebase
User Forums, and Product Notification Updates.
www.rockwellautomation.com/global/support/get-support-
Local Technical Support Phone Numbers Locate the phone number for your country.
now.page
Find the Direct Dial Code for your product. Use the
www.rockwellautomation.com/global/support/direct-
Direct Dial Codes code to route your call directly to a technical support
dial.page
engineer.
Installation Instructions, Manuals, Brochures, and
Literature Library www.rockwellautomation.com/literature
Technical Data.
Get help determining how products interact, check
Product Compatibility and Download Center
features and capabilities, and find associated www.rockwellautomation.com/global/support/pcdc.page
(PCDC)
firmware.

Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.

Rockwell Automation Support


For technical support, visit http://www.rockwellautomation.com/support/overview.page.

Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.

Allen-Bradley, ClearMultiprint, ClearPlot, LISTEN. THINK. SOLVE., Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Publication 1492-TD017B-EN-P - October 2018


Supersedes Publication 1492-TD017A-EN-P - April 2018 Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

You might also like