Professional Documents
Culture Documents
Assorted Codes For Building Check
Assorted Codes For Building Check
02
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using
2-in. or [50-mm] Cube Specimens)
astm d 5957-98 standard guide for flood testing horizontal waterproofing instal
lation
"Architectural Specifications, Division 2: B2 SAMPLE & TESTING
Sample shall be taken from the delivered batch of chb and be represented by thre
e (3) blocks for every thousand pieces for strength, absorption and moisture con
tent determinations"
"National Electrical Testing Association:
Table 10.1, Recommended Parameters for testing, in the absence of consensus stan
dards dealing with insulation resistance tests"
NFPA 13 - Chapter 10 Section 10.7. Requirement for laying pipe. 10.7.2. The torq
uing of bolted joints shall be checked.
"ACI 318M-05 CHAPTER 6 SECTION R6.4- CONSTRUCTION JOINTS
For the integrity of the structure, it is important that all construction joints
be defined in construction documents and constructed as required. Any deviation
s should be approved by the engineer or architect.
"
ASTM F-758.
"NFPA 101
7.10.2* Directional Signs. A sign complying with 7.10.3 with a directional indic
ator showing the direction of travel shall be placed in every location where the
direction of travel to reach the nearest exit is not apparent.
"