❒ Metal roof and floor decking (sf converted to tons, note details such as type, gage, thickness, finish, method of attachment) ❒ Structural steel shapes (lf or ea converted to lb, then tons) ❒ Beams and girders ❒ Columns, tubing, and pipes ❒ Angles and channels ❒ Plates and connectors ❒ Joist bridging and girts ❒ Hanger rods ❒ Wall bracing and end anchorage ❒ Anchor bolts and base plates (ea) ❒ Waste and connection (l/s) ❒ Metal canopy (ea or sf) ❒ Metal stairs (ea) ❒ Roof or elevator pit access ladder (ea) ❒ Elevator hoist or divider beams (ea) ❒ Metal gates and frames (ea) ❒ Embedded framing angle or plates (lf) ❒ Foundation support angle ❒ Masonry veneer support angle and wall top angle ❒ Roof parapet angle ❒ RTU frames ❒ Overhead door and sliding door framing ❒ Protective covers (ea) ❒ Column corners guards ❒ Trench drain and catch basin covers ❒ Expansion joint covers ❒ Thermostat covers ❒ Galvanized bollards ❒ Support framing for hot water tanks, heaters, etc. (ea or lf) ❒ Handrail and guardrail at stairs, walls, and balconies (lf) ❒ Paint or prime (l/s, sf, or lf)