Professional Documents
Culture Documents
RNC MML Commands 2
RNC MML Commands 2
4) Unit states
ZUSI;
ZUSI: FULL;
8) Command calendar
ZICL;
10) SCCP subsystem states, important that SGSN & MGW are AV-EX
ZNHI;
12) Ping SGSN from GTPU-0, GTPU-1, GTPU-2, GTPU-3 (ZQRX command) to
check if Iu-PS user planes are working
ZQRI: GTPU; Check valid IP addresses
ZQRX: GTPU, 0: IP=<ip address from ZQRI command>;
ZQRX: GTPU, 1: IP=<ip address from ZQRI command>;
ZQRX: GTPU, 2: IP=<ip address from ZQRI command>;
ZQRX: GTPU, 3: IP=<ip address from ZQRI command>;
13) CHECK VP NUMBERS IN RNC
ZLCI :< if no>, VP;
CTRL+c to stopZ
ZQMI;
ZQRI;
ZQRL;
ZRRI;
ZLJI: ROU=<route found by ZRRI>;
23) Check relation between SET (phy if), PHY TTP, ATM IF, Connected NE
ZLAI;
ZYDI;
ZYWI; if protected SDH
ZNEL; to find to where an ATM IF is connected
( ZYBI,ZYBM )
25) ZQMI;
26) ZLAI;
27) ZLCJ;