Professional Documents
Culture Documents
CSE Artificial Eye REPORT PDF
CSE Artificial Eye REPORT PDF
org
Seminar report
On
Artificial Eye
Submitted in partial fulfillment of the requirement for the award of degree
Of CSE
Preface
I have made this report file on the topic Artificial Eye; I have tried my best to elucidate all the
relevant detail to the topic to be included in the report. While in the beginning I have tried to give
a general view about this topic.
My efforts and wholehearted co-corporation of each and everyone has ended on a successful
note. I express my sincere gratitude to …………..who assisting me throughout the preparation
of this topic. I thank him for providing me the reinforcement, confidence and most importantly
the track for the topic whenever I needed it.
www.studymafia.org
Acknowledgement
I would like to thank respected Mr…….. and Mr. ……..for giving me such a wonderful
opportunity to expand my knowledge for my own branch and giving me guidelines to present a
seminar report. It helped me a lot to realize of what we study for.
Secondly, I would like to thank my parents who patiently helped me as i went through my work
and helped to modify and eliminate some of the irrelevant or un-necessary stuffs.
Thirdly, I would like to thank my friends who helped me to make my work more organized and
well-stacked till the end.
Next, I would thank Microsoft for developing such a wonderful tool like MS Word. It helped
my work a lot to remain error-free.
Last but clearly not the least, I would thank The Almighty for giving me strength to complete
my report on time.
www.studymafia.org
Content
Introduction
What is artificial eye?
The History of Artificial Eyes
How eyes work?
Visual System
The Manufacturing Process
The eye
Human Eye Conditions
Three Types of Eye Removal
Possible Conditions Leading to an Artificial Eye
Conclusion and Future Scope
References
www.studymafia.org
Introduction
In the current scenario, where over millions of people are affected by visual anomalities, it was
with a challenge that this project came into being. It aims at restoring vision to the blind.
Artificial Eye, which works through retinal implants, could restore sight to millions of people
around the world who suffer from degenerative eye diseases. This technology is still in its
infancy, but has progressed to human trials. This report aims to present a brief overview about
the basic aspects of this technology and where it’s headed.
An ocular prosthesis or artificial eye is a type of craniofacial prosthesis that replaces an absent
natural eye following an enucleation, evisceration, or orbital exenteration. The prosthesis fits
over an orbital implant and under the eyelids.
www.studymafia.org
In comparison to glass, acrylic provided better comfort and fit. Glass artificial eyes frequently
needed replacing and broke easily. Acrylic improved the techniques for making artificial eyes
such as impression molding, blending and allowed for easier changes in shape, color or size of an
ocular prosthesis.
www.studymafia.org
Visual System
The human visual system is remarkable instrument. It features two mobile acquisition units
each has formidable preprocessing circuitry placed at a remote location from the central
processing system (brain). Its primary task include transmitting images with a viewing angle of
at least 140deg and resolution of 1 arc min over a limited capacity carrier, the million or so
fibers in each optic nerve through these fibers the signals are passed to the so called higher visual
cortex of the brain.
The nerve system can achieve this type of high volume data transfer by confining such
capability to just part of the retina surface, whereas the center of the retina has a 1:1 ration
between the photoreceptors and the transmitting elements, the far periphery has a ratio of 300:1.
This results in gradual shift in resolution and other system parameters.
At the brain’s highest level the visual cortex an impressive array of feature extraction
mechanisms can rapidly adjust the eye’s position to sudden movements in the peripherals filed of
objects too small to se when stationary. The visual system can resolve spatial depth differences
by combining signals from both eyes with a precision less than one tenth the size of a single
photoreceptor.
www.studymafia.org
There are two types of prostheses. The very thin, shell type is fitted over a blind, disfigured eye
or over an eye which has been just partially removed. The full modified impression type is made
for those who have had eyeballs completely removed. The process described here is for the latter
type.
1. The ocularist inspects the condition of the socket. The horizontal and vertical dimensions
and the periphery of the socket are measured.
2. The ocularist paints the iris. An iris button (made from a plastic rod using a lathe) is
selected to match the patient's own iris diameter. Typically, iris diameters range from 0.4-
0.52 in (10-13 mm). The iris is painted on the back, flat side of the button and checked
against the patient's iris by simply reversing the buttons so that the color can be seen
through the dome of plastic. When the color is finished, the ocularist removes the
conformer, which prevents contraction of the eye socket.
3. Next, the ocularist hand carves a wax molding shell. This shell has an aluminum iris
button imbedded in it that duplicates the painted iris button. The wax shell is fitted into
the patient's socket so that it matches the irregular periphery of the socket. The shell may
have to be reinserted several times until the aluminum iris button is aligned with the
patient's remaining eye. Once properly fitted, two relief holes are made in the wax shell.
4. The impression is made using alginate, a white powder made from seaweed that is mixed
with water to form a cream, which is also used by dentists to make impressions of gums.
After mixing, the cream is placed on the back side of the molding shell and the shell is
inserted into the socket. The alginate gels in about two minutes and precisely duplicates
the individual eye socket. The wax shell is removed, with the alginate
www.studymafia.org
For a conventional implant, the surgeon removes the eyeball by severing the muscles,
which are connected to the sclera (white of eyeball). The surgeon then cuts the optic
nerve and removes the eye from the socket. An implant is then placed into the socket to
restore lost volume and to give the artificial eye some movement, and the wound is
closed.
impression of the eye socket attached to the back side of the wax shell.
5. The iris color is then rechecked and any necessary changes are made. The plastic
conformer is reinserted so that the final steps can be completed.
6. A plaster-of-paris cast is made of the mold of the patient's eye socket. After the plaster
has hardened (about seven minutes), the wax and alginate mold is removed and
discarded. The aluminum iris button has left a hole in the plaster mold into which the
painted iris button is placed. White plastic is then put into the cast, the two halves of the
cast are put back together and then placed under pressure and plunged into boiling water.
This reduces the water temperature and the plastic is thus cured under pressure for about
23 minutes. The cast is then removed from the water and cooled.
7. The plastic has hardened in the shape of the mold with the painted iris button imbedded
in the proper place. About 0.5 mm of plastic is then removed from the anterior surface of
the prosthesis. The white plastic, which overlaps the iris button, is ground down evenly
around the edge of the button. This simulates how the sclera of the living eye slightly
overlaps the iris. The sclera is colored using paints, chalk, pencils, colored thread, and a
liquid plastic syrup to match the patient's remaining eye. Any necessary alterations to the
iris color can also be made at this point.
8. The prosthesis is then returned to the cast. Clear plastic is placed in the anterior half of
the cast and the two halves are again joined, placed under pressure, and returned to the
hot water. The final processing time is about 30 minutes. The cast is then removed and
www.studymafia.org
cooled, and the finished prosthesis is removed. Grinding and polishing the prosthesis to a
high luster is the final step. This final polishing is crucial to the ultimate comfort of the
patient. The prosthesis is finally ready for fitting.
The eye
the main part in our visual system is the eye. Our ability to see is the result of a process very
similar to that of a camera. A camera needs a lens and a film to produce an image. In the same
way, the eyeball needs a lens (cornea, crystalline lens, vitreous) to refract, or focus the light and
a film (retina) on which to focus the rays. The retina represents the film in our camera. It
captures the image and sends it to the brain to be developed.
by artificial solar cell arrays has to overcome some difficulties, especially the energy supply for
successful retina stimulation.
The choroid, which carries blood vessels, is the inner coat between the sclera and the
retina.
The conjunctiva is a clear membrane covering the white of the eye (sclera).
The cornea is a clear, transparent portion of the outer coat of the eyeball through which
light passes to the lens.
The iris gives our eyes color and it functions like the aperture on a camera, enlarging in
dim light and contracting in bright light. The aperture itself is known as the pupil.
The lens helps to focus light on the retina.
The macula is a small area in the retina that provides our most central, acute vision.
The optic nerve conducts visual impulses to the brain from the retina.
The pupil is the opening, or aperture, of the iris.
The retina is the innermost coat of the back of the eye, formed of light-sensitive nerve
endings that carry the visual impulse to the optic nerve. The retina may be compared to
the film of a camera.
The sclera is the white of the eye.
The vitreous is a transparent, colorless mass of soft, gelatinous material filling the eyeball
behind the lens.
www.studymafia.org
Orbital Implants
Should eye removal be necessary, the surgeon will likely place an orbital implant to recover
some of the volume lost in the evisceration or enucleation. The orbital implant is attached to the
4 rectus muscles, providing movement of the implant with the fellow eye. Typically, the better
the movement of the implant, the better the motility of the artificial eye or scleral shell.
Implant choices may be dictated by the conditions indicating eye removal, the surgeon's
preference and your post-removal objectives. Most implants are spherical in shape, but other
shapes are possible. Implants can also be coated or wrapped in donor sclera or alloderm
materials. Below is a list of typical orbital implants:
While implant type is an important decision to one facing enucleation or evisceration, the most
important factor is surgical technique. If you are facing the option of eye removal, we
recommend that you contact your local ocularist for a recommendation of oculoplastic or
ophthalmic surgeons in your area.
www.studymafia.org
ENUCLEATION - Removal of entire eye globe. An implant is placed in the tenons capsule to
replace volume lost due to eye removal. The four extra-ocular rectus muscles are attached to the
implant for motility.
BLIND, PAINFUL EYE - Condition in which eye has no light perception (NLP) and is causing
pain. Enucleation is indicated to alleviate pain and avoid risk of sympathetic ophthalmia.
OCULAR MELANOMA - A type of cancer arising from the cells of melanocytes found in the
eye. Melanoma is the most common type of ocular cancer.
TUMORS - Many types of cancers can affect the different structures of the eye. If treatment is
unsuccessful in removing the tumor, enucleation is typically indicated.
TRAUMA - The most common cause of eye loss, trauma can take many forms; ruptured globe,
penetrating or perforating eye injury, blunt force trauma. When risk of infection or pain is high,
enucleation is typically indicated.
RUPTURED GLOBE - Full thickness wound of the eyewall caused by a blunt object or blunt
force.
PENETRATING EYE INJURY - Injury to the eye that causes an entrance wound and/or an
intraocular foreign body.
PEFORATING EYE INJURY - Injury to the eye that causes an entrance and exit wound as in
for example a BB pellet that enters in one location and exits another.
www.studymafia.org
CATARACT - A condition in which the lens of the eye becomes cloudy, diminishing vision.
Cataracts are commonly associated with aging but also may be precipitated by trauma
INFECTION - Many types of infections can result in the loss of vision or the necessity to
remove the eye to protect the rest of the body from infection. Shingles, uveitis, endophthalmitis,
corneal ulcer, etc.
VITREOUS HEMORRHAGE - Bleeding in the vitreous cavity in front of the retina. May be
caused by either disease or injury.
There has been marked increase in research and clinical work aimed at understanding low vision.
Future work has to be focused on the optimization and further miniaturization of the implant
modules. Commercially available systems have started emerging that integrates video
technology, image processing and low vision research.
Implementation of an Artificial Eye has advantages. An electronic eye is more precise and
enduring than a biological eye and we cannot altogether say that this would be used only to
benefit the human race. In short successful implementation of a bioelectronic eye would solve
many of the visual anomalities suffered by human’s to date.
To be honest, the final visual outcome of a patient cannot be predicted. However, before
implantation several tests have to be performed with which the potential postoperative function
can be estimated. With this recognition of large objects and the restoration of the day-night cycle
are the primary goals of the prototype implant
www.studymafia.org
References
www.google.com
www.wikipedia.com
www.studymafia.org