Professional Documents
Culture Documents
Quantity and Units
Quantity and Units
1. Ruler
Length of the ruler is a measuring tool most often used to measure the length scale. Rule
has the smallest scale 0.1 cm = 1 mm.
2. vernier caliper
Sorong is a long-term measure that can be used to measure the diameter of a ball, inner
and outer diameter of a pipe. Sorong term has an accuracy mm = 0.1 mm = 0.01 cm
The results of measurements are the main scale = + (Nonius x 0.1 mm scale)
= 2.46 cm
3. micrometer caliper
micrometer caliper can be used to measure the thickness of the plate, such as steel plate
even a piece of paper . Micrometer caliper is more rigorous than the long slide.
Accuracy reaches 0.01 mm.
2. Measuring Mass
Mass is the amount of a substance that is contained in an object. Its SI unit is the
kilogram (kg). Mass different from weight. Weight is the amount of force that caused
objects dialmi gravity on the object. Its SI unit Newton (N).
Mass was measured using a balance scale. Balance sheet is divided into several types,
such as two-arm analytical balance, Ohauss balance sheet, balance sheet hanging
sleeves, and a digital balance
a. Two Analytical Balance Arm
Balance is useful to measure the mass of the body, such as gold, stone, crystal objects,
and others. Limits of analytical precision balance the two arms is 0.1 grams.
b. Ohauss Balance
Balance is useful for measuring the mass of metal objects or in laboratory practice.
Load capacity is weighed using the balance sheet is 311 grams. Accuracy limits Ohauss
balance is 0.1 grams.
Balance is useful for determining the mass of the body, the way it works by shifting the
burden of ballast along the stem.
d. Digital Balance
Balance of digital (electronic balance) in its use is very practical, because the large mass
of objects measured directly appointed and legible on a digital balance
screen.theaccurasy is up to 0.001 grams.
3. Measuring Time
Time is a quantity that indicates the length of an event taking place. Here are some tools
to measure the amount of time.
a. Stopwatch, with the accuracy 0.1 seconds on the stopwatch for each scale is divided
into 10 sections. These devices are usually used for the measurement of time in sports
activities or in research practice.
d. Cesium atomic clocks, made with a precision of 1 second every 3,000 years, meaning
that the measurement error of this clock is approximately one second in a span of 3,000
years. (for more details about the cesium atomic clock, can be read here)
Object has a heat level that is different, cold, warm, and hot. To distinguish the level of
heat precisely measured with a thermometer. The SI unit temperature is Kelvin (K).
Based on the temperature scale, in four different dibagim thermometer, the thermometer
scale Fahrenheit, Celsius scale, the Kelvin scale, and scale Reamur.The thermometer
has a Fahrenheit scale the freezing point at 32 ° F and the boiling point at 212 ° F.
Kelvin thermometer scale has a freezing point at a temperature of 273 K and the boiling
point at 373 K. Temperature of 0 K is called absolute zero temperature, the temperature
of all the molecules stop moving.
Reamur thermometer scale has the freezing point at 0 ° R and the boiling point at 80 °
R.
Pertama adalah alat ukur panjang
1. Mistar
Mistar adalah alat ukur panjang yang paling sering dipergunakan untuk mengukur
besaran panjang. Mistar memiliki skala terkecil 0,1 cm = 1 mm.
2. Jangka Sorong
Jangka Sorong adalah alat ukur panjang yang dapat dipergunakan untuk mengukur
diameter sebuah bola, dalam dan diameter luar dari sebuah pipa. Jangka Sorong
memiliki ketelitian mm = 0,1 mm = 0,01 cm
= 2,46 cm
.3 Mikrometer Sekrup
Mikrometer Sekrup adalah alat ukur panjang yang dapat dipergunakan untuk mengukur
ketebalan plat, misalnya plat baja bahkan ketebalan selembar kertas. Mikrometer sekrup
lebih teliti dibandingkan jangka sorong. Ketelitiannya mencapai 0,01 mm.
2. Mengukur Massa
Massa adalah banyaknya zat yang terkandung di dalam suatu benda. Satuan SI-nya
adalah kilogram (kg). Massa berbeda dengan berat. Berat adalah besarnya gaya yang
dialmi benda akibat gaya tarik bumi pada benda tersebut. Satuan SI-nya Newton (N).
Besaran massa diukur menggunakan neraca. Neraca dibedakan menjadi beberapa jenis,
seperti neraca analitis dua lengan, neraca Ohauss, neraca lengan gantung, dan neraca
digital.
Neraca ini berguna untuk mengukur massa benda, misalnya emas, batu, kristal benda,
dan lain-lain. Batas ketelitian neraca analitis dua lengan yaitu 0,1 gram.
b. Neraca Ohauss
Neraca ini berguna untuk mengukur massa benda atau logam dalam praktek
laboratorium. Kapasitas beban yang ditimbang dengan menggunakan neraca ini
adalah 311 gram. Batas ketelitian neraca Ohauss yaitu 0,1 gram.
Neraca ini berguna untuk menentukan massa benda, yang cara kerjanya dengan
menggeser beban pemberat di sepanjang batang.
d. Neraca Digital
Neraca diigital (neraca elektronik) di dalam penggunaanya sangat praktis, karena besar
massa benda yang diukur langsung ditunjuk dan terbaca pada layarnya.Ketelitian neraca
digital ini sampai dengan 0,001 gram.
3. Mengukur Waktu
Waktu merupakan besaran yang menunjukkan lamanya suatu peristiwa berlangsung.
Berikut ini beberapa alat untuk mengukur besaran waktu.
a. Stopwatch, dengan ketelitian 0,1 detik karena setiap skala pada stopwatch dibagi
menjadi 10 bagian. Alat ini biasanya digunakan untuk pengukuran waktu dalam
kegiatan olahraga atau dalam praktik penelitian.
d. Jam atom Cesium, dibuat dengan ketelitian 1 detik tiap 3.000 tahun, artinya
kesalahan pengukuran jam ini kira-kira satu detik dalam kurun waktu 3.000 tahun.
4. Mengukur Suhu
Benda memiliki tingkat panas yang berbeda-beda, dingin, hangat, dan panas. Untuk
membedakan tingkat panas secara tepat diukur dengan termometer. Suhu satuan SI-nya
adalah Kelvin (K).
Termometer skala Celsius memiliki titik beku pada suhu 0 °C, dan titik didih pada 100
°C.
Termometer skala Kelvin memiliki titik beku pada suhu 273 K dan titik didih pada 373
K. Suhu 0 K disebut suhu nol mutlak, yaitu suhu semua molekul berhenti bergerak.
Termometer skala Reamur memiliki titik beku pada suhu 0 °R dan titik didih pada 80
°R.