Professional Documents
Culture Documents
Il200 en PDF
Il200 en PDF
Lock-Up Valve
Series IL201/211/220
Regulators
mThe lock-up valve is used if any air source or air supply piping line failure occurs in the
air operated process control line.
Single acting, Double acting: Retains pressure at the operating area as emergency operation until the air
Relays/Valves
source is recovered to its normal state.
3 Port: Changes the supply port if a trouble occurs.
How to Order
IL 201 02
Electro-Pneumatic
Transducers
Action
Suffix
201 Single acting
Accessories Nil Standard
211 Double acting
Nil None T High temperature (–5 to 100nC)
220 3 Port
B With bracket L Low temperature (–30 to 60nC)
Thread type S External parts copper-free
Actuators
Nil Rc
Port size External parts copper-free/
02 ST
NPT
Principle of Operation
Air Preparation
Equipment
IL201 IL211 The signal air pressure enters the upper diaphragm
Adjusting screw
Adjusting screw
chamber : to generate a force. When this force is
Adjusting spring . Adjusting spring .
Exhaust port ; Exhaust port ; larger than the force generated by compressing the
Upper diaphragm @ Upper diaphragm @ adjusting spring ., the upper diaphragm @ is
Upper diaphragm chamber : Upper diaphragm chamber :
pushed up, the exhaust port ; is closed, and the
Piping Materials Industrial Filters
SIG SIG
Lower diaphragm chamber = signal air pressure enters the lower diaphragm
Lower diaphragm chamber =
Lower diaphragm B Lower diaphragm B chamber = and acts the lower diaphragm B. This
Piston >
IN OUT IN1 OUT1
pushes down the piston > to open the valve.
Piston >
Valve 2 IN2 OUT2
IL201 and IL211 enter the status, in which the flow
Spring 8 Valve 2 path between IN and OUT is opened. IL220 enters
Spring 8
IL220 the status, in which the flow path between IN1 and
Adjusting screw
Adjusting spring .
OUT is opened. If the signal air pressure drops to a
Exhaust port ; level below the set pressure for some reason, the
Upper diaphragm @ upper diaphragm @ is pushed down, the pressure
Upper diaphragm chamber :
SIG inside the lower diaphragm = is exhausted from
Lower diaphragm chamber = the exhaust port ;, and the valve 2 is closed by
Lower diaphragm B IN1 OUT
the force of the spring 8. At this time, IN and OUT
Piston > are shut down in IL201 and IL211. In IL220, IN1
Valve 2 and OUT are shut down, and the flow path between
Spring 8 IN2
IN2 and OUT is opened. The set pressure is
adjusted with the adjusting screw
.
56