Professional Documents
Culture Documents
Laprak 1
Laprak 1
A. INTRODUCTION
As a model for simple harmonic Picture 1.
motion, consider a block of mass m Tools Setting
attached to the end of a spring, with the
block free to move on a frictionless,
horizontal surface . When the spring is
neither stretched nor compressed, the
block is at rest at the position called the
equilibrium position of the system, which
we identify as x = 0. We know from Picture 2. Tools
experience that such a system oscillates
back and forth if disturbed from its
equilibrium position. We can understand
the oscillating motion of the block in Figure
1 qualitatively by first recalling that when
the block is displaced to a position x, the
spring exerts on the block a force that is cm and then release. Calculate the time
proportional to the position and given by needed to reach several oscillations, here
Hooke’s law (Serway, 2014) we use 5 oscillation. Calculate on each
material one by one, then count in both
B. OBJECTIVE series and parallel. For determining elastic
constant, we need a period to calculate
Elastic Material Period the angular velocity. so that the elastic
2 constants will be found by the equation
1.5 k=ω2m.
1
0.5
0
A B Series Parallel
D. RESULT AND DISCUSSION
Spring Karet Pentil
In this lab we use several elastic
Ballon
materials, namely balloons, “Karet Pentil” ,
This experiment has objective to "elastic" and spring. To determine the
measuring elastic constant from every elasticity constant in our circuit requires a
elastic material which is arranged in series period (T), to calculate ω and k later.
and parallel also in a single thing. In the
end, we compare our mathematics with
tracker application. The graph above is a sample of all the
C. TOOLS & METHOD data we took when practicing. The data we
First, we prepare all the necessary present is period data. While the graph below
materials such as statif, mass, and all is a graph of the differences in the constants
elastic materials that we will look for of each elastic materials.
elastic constants. Place the elastic
material at the location and mass,
stretching the mass downward about + - 1