Professional Documents
Culture Documents
CEMS Group Presentation PDF
CEMS Group Presentation PDF
www.bartec.ro
www.cems.ro
RELIABILITY.
Efficiency.
PERFORMANCE.
toward accomplishing the most innovative goals. These three values translate
into the objectives of the entire activity, technical solutions identified by the
projects.
courses in the country and abroad, or young visionaries at the outset, they
industrial robots and dosing and weighing systems, its products being found in almost all
major industrial projects in Romania, being also appreciated and recognized internationally.
Reducing operating costs, increasing operational safety and reliability, process digitization,
and not last, a reduced environmental impact, are our customers’ concerns and, implicitly,
Bartec Safety Engineering SRL was established based on the partnership with the German
group Bartec, one of the world leaders in technologies for environments with an explosion
risk. The technology of the German group, combined with the expertise of the CEMS group,
CEMS EPC SA concentrates the competences of the group, for the development of complex
top flight technical skills are a guarantee of performance, from feasibility studies to
implementation itself.
UPSTREAM MIDSTREAM DOWNSTREAM
Services
»» Maintenance »» Turnkey projects
Electrical installations Design
Hazardous areas electrical installations Delivery
Electric motors installation, repair and maintenance Installation
Maintenance software Commissioning
The origins of AUTOMATICA date back to 1935, with the emergence of the FORD
Romania SAR automobile factory, having the first operational line in Eastern
Europe at that time. After several changes in name and activity profile,
with the Romanian industry, acquiring over half a century of experience and
In 2018, the Automatica business was taken over by the CEMS Group. An
development will maintain the values that have been cultivated for decades:
PERFORMANCE
throughout the entire life cycle of equipment
The SIVACON® S8 low-voltage power The SIVACON® S8 low-voltage power The section, either single or double-
distribution board sets new standards as a distribution board is a power switchgear fronted, can be installed together with a
power distribution board or Motor Control and control gear assembly with a design main busbar system or back-to-back with
Center (MCC) for industrial applications or verification based on rigorous testing. a separate main busbar system.
in infrastructure.
Evidence of its physical properties has been Different installation designs can be
The power distribution board system up provided in the product testing department combined in one section with ease.
to 7,000 A for the simple and consistent under both operating and fault conditions.
distribution of power offers a wide range The flexible, modular technology allows
of possible uses. An arcing-resistant locking system also for the simple exchange or addition of
ensures maximum personal safety. functional units.
AUTOMATION AND SCADA COMPLEX SYSTEMS
»» Distribution and automation equipment for electric power plants
»» Electrical control panels
»» Sequential process control equipment
»» SCADA systems
MEDIUM VOLTAGE ELECTRICAL EQUIPMENT
»» Primary distribution switchgear »» Switchgear panels for:
»» Air-insulated switchgear, with vacuum or SF6 • Transformer
switching equipment • Feeder
»» 6, 12, 24 kV single busbar system switchgear with • Special applications
rated current ≤ 4000 A • Measurements
»» 6, 12, 24 kV double busbar system switchgear with • Bus-coupler, bus-riser
rated current ≤ 2500 A • Disconnecter
»» 6, 12, 24 kV Retrofit solution with fully enclosed • Motors
cradle with circuit breaker, secondary circuits, »» Power generator switchgear for 6...12kV, rated
two doors and frames for rated current ≤ 2500A power up to 50MW
»» Power capacitor banks, automated, for 6, 12, 24kV, »» Switchgear for 6kV induction furnace
≤ 2,4MVAr »» 6, 12, 24 kV power bus systems with rated currents
»» Custom-made MV indoor or outdoor switchgear up to 4000A
»» Automated switchgear, integrable into SCADA,
smart grid
»» Automated switchgear with motor actuated truck,
disconnectors and earth switch
Equipment Shelters
Designed solutions can include the installation of fire resistant components, thermal and
acoustic insulation, or components to create ATEX controlled (explosion-proof) environments,
specialized equipment and equipment such as HVAC, fire and gas systems and electric
systems.
BARTEC GmbH. Our objective is to provide our clients with access to a wide
same quality and technical support that the German group offers around
the world.
technologies.
and maintenance.
BUS TECHNOLOGY
»» Remote I/O solutions
»» Bus interface systems
MOBILE COMPUTING
»» Barcode readers and RFID scanners
»» Radio data transmission WLAN
»» Bluetooth
OPERATOR STATIONS
»» Remote stations
»» Panel PCs
»» Text displays/graphic displays
Ex e control panels
»» Material: aluminium alloy (copper free)
»» IP protecție: 66
»» Ambient temperature: -20°C to +40°C (other options
available)
»» Protection: Zone 1, 2; II A, II B, II C, T1-T6
Control and connection
equipment
Insert and limit Control and display unit Ex p local control station
switch ComEx
Classification
»» Polyester
»» Aluminium
»» Stainless steel
Benefits
»» Chemical resistance
»» Impervious
»» Fireproof
»» Halogen free
»» UV resistance
»» High temperatures resistance
»» Corrosion resistance
Smartphones/Cameras
BARTEC PIXAVI offers extremely powerful smartphones and
cameras. On-site open up completely new dimensions for
monitoring, inspection and maintenance: work process becomes
much easier, safer and more efficient.
Warning devices
PA/GA system
Drive technology
»» Electric motors in Ex d design
»» Customized solutions
Panou-PC
Analyzers and
measurement
technology
TECHNOLOGIES
»» Humidity measurement
»» Temperature measurement
»» Seismic instrumentation
»» Gas monitoring
Analyzers
»» Dipstick system
»» Quality assurance
»» Sealed transport
BENEFITS
»» Compact size
»» Directed lighting
»» Robust and efficient
»» Lower heat emission
»» Improved safety
»» Smaller environmental footprint
CERTIFICATIONS
INSEMEX PETROȘANI CERTIFICATION
ISO 9001:2015
Authorization from Bartec Technor as product representative
for: E-TNR, TNBCD, TNCD, TNCN, TNXCC
Policies in the field of quality, work health and safety and environment are
Some of our consistent priorities are reliability, easy operation and economic
suppliers at a global level, our solutions include some of the most advanced
products available on the market, thus generating added value for our
international projects.
The maintenance of installations located in areas with an explosion risk implies, besides general principles and actions
for maintenance, certain actions that are specific to the high risk of this type of industrial capacity. Staff and installation
safety has the utmost importance. Standard procedures on the maintenance of electrical facilities are supplemented by
regular checks on the compliance of equipment with ATEX guidelines. Repair procedures are also adapted to the particular
features of these work environments. Maintenance works in areas with an explosion risk are assigned to teams with a
double ANRE and INSEMEX certification.
»» Transformer stations
»» Main power connections
»» Indoor and outdoor installations
»» Assembly of electrical boards
»» Industrial lighting
»» Counters for large-sized constructions or building portfolios
ELECTRICAL HEAT TRACING SYSTEMs
With a view to accurately meeting the needs of complex technological processes, we have developed integrated electrical
accessory solutions, such as electricity supply, automation systems, supply of cables for electrical heating and insulation
purposes. The solutions may be adapted to various operating environments, including those with an explosion risk.
Solutions:
»» Technological design services
»» Procurement and planning
»» On-site services
»» Post-installation services
»» Installation and commissioning
»» As-built documentation
»» Staff training
»» Preventive maintenance and repairs
ELECTRICAL MOTORS MAINTENANCE AND REPAIR
Electric motors represent an average of 60% of the electricity consumption in an industrial facility. They may exceed 70%
of the total energy consumption in a process industry. The continuity of the manufacturing process largely depends on the
electric motors reliability. Depending on the criticality of its technological position, the operating failure of an motor may
cause more or less serious disturbances of the manufacturing process.
Services:
»» Supply and assembly of Bartec electric motors (including EX)
»» Preventive and predictive maintenance
»» Technical support upon commissioning
»» Maintenance reliability/cost optimization by motor differentiation depending on their critical technological position
»» Multi-year replacement optimisation plans for motors, taking into account the priorities of reliability and energy
efficiency
Maintenance and electrical equipment
service
There are many advantages for the industrial operators who assigned the maintenance of their power installations to us:
»» Access to specialists in the electrical field, without burdening their own staff schemes
»» Planning preventive maintenance operations
»» Timely intervention in case of a failure
»» Lower costs with maintenance and operation of power equipment and installations
»» Reliability indicators improvement
To significantly reduce the time between reporting a malfunction or imminent failure risk and resolving it, we went further by setting
up a dedicated fast response mobile unit, fully equipped for electromechanical and electromechanical interventions , and securely
supporting communications in the intervention Ex areas.
Solutions:
»» Periodic measurements and checks
»» Checking for continuity: connection of the belt to the earthing socket, engines and electrical boards
»» Checking the insulation resistance of electrical conductors, loop impedance, short-circuit current
»» Checking protection devices/equipment
»» Checking differential disjunctors, the insulation resistance of the cases of electrical devices
»» Measurements and checks for commissioning power installations, as well as heating, ventilation and air conditioning units
»» Checking lighting circuits
»» Checking the balance of phase consumption
»» Checking continuity and phases identification
»» Cables failures with a voltage of up to 10 kV
»» Issuing review reports
electrical design
The design department closely cooperates with the performance and production departments, capitalizing project
experience in new innovative solutions. Due to our constant cooperation with major technology providers and many
external partners, design teams are up to date with the newest technologies and good practices at a global level.
INDUSTRIAL LOGISTICS
Our project management services include establishing the customers’ needs, estimating costs, preparing tender
documents, checking the project, managing the contract, performing the project and verifying completed works. From its
design till its commissioning, the entire project is supervised by an experienced project manager. The engineers involved
in the project have specialized skills and work collectively in order to accurately achieve the customers’ targets. Our
successfully completed projects include greenfield industrial capacities, upgrades in the controlling systems of tools,
repairs, retooling and refurbishment of installation and equipment systems
»» Software integration - Oracle Asset Lifecycle Management – Dedicated application for process maintenance
management
»» Efficient communication between stakeholders management
»» Project management processes
• Initiation
• Planning
• Execution
• Monitoring and control
• Project closure
»» Time, cost, risk, purchase management
EPC contractor
Turn-key projects concentrate all the managerial and technical skills of the organisation. The concept was developed
with a view to meeting the needs of customers who want technically reliable and economically efficient solutions, as a
response to a specific issue or as a part of a development plan.
Client benefits:
»» Efficient project management
»» A single general contractor – cost savings
»» A single project officer, for higher efficiency and
faster response times
»» Responsibility and coordination of all project
activities
»» Pre-design project budgeting and cost saving
programmes
REFERences CERTIFICations
INDUSTRIAL MONTAJ S.A. ISO 9001:2015
SC ENERGOMONTAJ GRUP SRL ISO 14001:2015
S.C. GENERAL PREST S.A. ISO 18001:2017
GENTOIL S.R.L. ATESTAT ANRE TIP C1A
OMV PETROM SA ATESTAT ANRE TIP C2A
PETROTEL-LUKOIL S.A. ATESTAT ANRE TIP E2
Remero Fil S.A. ATESTAT INSEMEX PETROȘANI
S.N.G.N. ROMGAZ S.A. ATESTAT CNSIPC - Design and
SIEMENS S.R.L. Divizia E P installation of fire alarm
TOTALMONTAJ S.R.L. systems