Professional Documents
Culture Documents
Technical
Information
NCO Prepolymers
as a binder for
rubber granules
covestro.com
NCO Prepolymers
Product portfolio MDI based prepolymers
Desmodur E 29 24.0 ± 1.0 220 ± 80 at 25 °C 2.2 380 1K Primer between concrete and adhesives
Desmodur E 20100 15.7 ± 0.5 1,100 ± 400 at 23 °C 2.0 540 1K Injection resin, 1K adhesives
Desmodur E XP 2723 approx. 15.4 approx. 1,500 at 25 °C 2.3 620 1K Assembling adhesives, 2K adhesives (brown)
Desmodur E 21 16.0 ± 0.7 5,400 ± 1,300 at 25 °C 2.8 720 1K Wood bonding (D4), 2K adhesives (brown)
Desmodur XP 2665 15.8 ± 0.7 5,250 ± 1,250 at 25 °C 2.7 720 1K Wood bonding (D4), 2K adhesives (brown)
Desmodur E XP 2762 approx. 15.9 approx. 2,800 at 23 °C 2.1 555 1K Wood bonding (D4), 2K adhesives (yellowish)
Desmodur E 22 8.6 ± 0.3 2,800 ± 400 at 23 °C 2.0 950 1K Bonding of rubber pellets, 2K adhesives
Desmodur E XP 2715 approx. 15.0 approx. 910 at 70 °C 2.0 560 Precursor for low monomer 1K PUR hotmelts
Desmodur E XP 2726 approx. 6.0 approx. 4,500 at 23 °C 2.0 1,400 Precursor for low monomer 1K PUR hotmelts
Desmoseal M 280 2,1 ± 0,3 33,000 ± 7,000 at 23 °C 2.5 5,000 1K Sealants, elastic adhesives
NCO Prepolymers
Product portfolio low-monomer prepolymers
2,500 ±
Desmodur XP 2599 HDI 6.0 ± 0.5 < 0.5 500 4.0 2,800 2K Coatings, 2K adhesives
2,600 ±
Desmodur E XP 2747 HDI 16.9 ± 0.4 < 0.5 500 4.0 890 1K and 2K Adhesives
* Viscosity
at 50 °C
Melos GmbH
D-49324 Melle
www.melos-gmbh.com
Examples of Application
1K Bonding of rubber pellets
Desmodur XP 2617
Desmodur E 22
Molecular
NCO content Viscosity Approx.
Product weight Remarks
[ % by wt.] [mPas] Functionality
[g/mol]
1K Bonding of rubber pellets
Desmodur XP 2617 12.5 ± 1.0 4,250 ± 1,250 2.0 680
→ suitable for white stripes
1K Bonding of rubber pellets
Desmodur E 22 8.6 ± 0.3 2,800 ± 400 at 23 °C 2.0 950
→ suitable for red brown parts
Disclaimer
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but
without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not
release you from the obligation to check its validity and to test our products as to their suitability for the intended
processes and uses. The application, use and processing of our products and the products manufactured by you
on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our
products are sold in accordance with our General Conditions of Sale and Delivery.