Professional Documents
Culture Documents
MTG PDF
MTG PDF
MT33P, MTG
T h r e a d F i l t e r
Automatic
Self-Cleaning
Wa t e r F i l t e r
protection
Side stream filtration for
~Worldwide patents ●
cooling towers
~Short payback ●
●
Off-shore injection water
Swimming pool filtration
How the Thread Filter MT33P works
The MT-33P Thread filters • The booster pump (11) • The piston assembly propels
remove dirt particles as water delivers the pressurized water the linear movement of the
flows through the multi-layered to the shuttle pipe (12). This nozzles. When the piston
thread cassettes (5) to the pipe carries water to the reaches the end of the
collecting pipes (3) and out of nozzles (13) that spray the cassette row, the nozzle turns
the filter via outlets (4). Dirt surface of each cassette row. the cassette package to begin
particles that accumulate on and The water spray, referred to the next stroke until the entire
in between the thread layers as the flushing jet stream, cassette package is clean.
cause a pressure differential, penetrates the thread layers When all rows have been
and at a preset level or time and hits the plastic support cleaned, the flushing valve (10)
interval, the control unit (6) (14). The returning stream and the drain (9) close. The inlet
activates the self-cleaning cycle: (referred to as the reject and outlet valves (7, 8) open
• The inlet and outlet valves stream) together with the dirt allowing water to flow through
(7, 8) close, and the drain (9) from the cassettes flows the filter and the booster pump
and flushing valves (10) open. through the filter housing and (11) stops operating.
out the filter via the drain
valve (9). The combined
flushing jet and reject streams
ensure 100% cleaning.
Control Unit 6
NIT
LU
10
RO
NT
CO
AD
RE
TH
®
MAT
TO
FIL
12
13
16 t
le
ut
O
5
15
11
4
8
7
9 1
Inlet
Drain
14
MT33P Specifications:
Flow rate (per unit) 10 m3/h max
Thread cassette 3, 10µ
Working pressure 0.2 to 10 barg
Pressure loss maximum flow 0.2 barg
Flush cycle duration About 2 minutes
Flush supply 12 m3/h at 8 to 9 bar
Flush logic ∆P or ∆T
Self cleaning mechanism High pressure spray nozzles
Maximum working temperature 40°C
Media surface area 1 m2
Liquid velocity 10 m/h max
Interchangeable cassette package Can be extracted without disconnecting the
filter from the pipeline
Control Electronic with hydraulic
or
Electronic with hydraulic and pneumatic
Inlet/outlet size 3”
Inlet/outlet connection standards ASA 150, BSTE, DIN, PN10, JIS K10
Installation type On-line
Installation configuration Stand-alone or in a group
Wetted seals Natural and nitrile rubber
Empty Full
Weight 170kg 200kg
Weight with accessories 210kg 250kg
MT33P
MTG
How the Thread Filter MTG works
The MTG Thread filters remove • The booster pump (11) • The piston assembly (15)
dirt particles as water flows delivers the pressurized water propels the linear movement
through the multi-layered thread to the shuttle pipe (12). This of the nozzles. When the
cassettes (5) to the collecting pipe carries water to the linear movement is
pipes (3) and out of the filter via nozzles (13) that spray the completed, the turn
outlets (4). Dirt particles surface of the cassette. This mechanism (16) turns the
accumulate on and in between spray, referred to as the cassette to a new index
the thread layers causing a flushing jet stream, penetrates position and once the
differential pressure and at a the thread layers and hits the cassettes have completed a
preset pressure differential value plastic support (14). The full turn, the filter is clean.
or time interval, the control unit returning stream (referred to When the cassettes are clean,
(6) activates the self-cleaning as the reject stream) together the flushing valve (10) and the
cycle. with the dirt from the cassettes drain (9) close. The inlet and
• The inlet and outlet valves flows through the filter outlet valves (7, 8) open
(7, 8) close, and the drain housing and out the filter via allowing water to flow through
valve (9) and flushing valve the drain valve (9). The the filter and the booster pump
(10) open. combined flushing jet and (11) stops operating.
reject streams ensure 100%
cleaning.
13
Co
ntro
6 l Un
it
1
Inle
t
16
15
3
Inlet 4
1 tlet
Ou
7
11
12
14
in
Dra
9
let
Out
5
4
2
10
4157
1980
MTG Specifications:
Flow rate (per unit) 300 m3/h
Thread cassette 3, 10, 20µ
Working pressure 0.2 to 10 barg
Pressure loss maximum flow 0.2 barg
Flush cycle duration About 10 minutes
Flush supply 20 m3/h at 8.5 to 9 bar
Flush logic ∆P or ∆T
Self cleaning mechanism High pressure spray nozzles
Maximum working temperature 45°C
Media surface area 28 m2
Liquid velocity 10.7 m/h max.
Interchangeable cassette package Can be extracted without disconnecting the
filter from the pipeline
Control Electronic with hydraulic
or
Electronic with hydraulic and pneumatic
Inlet/outlet size 4” x 4” inlet; 4” x 4” outlet
Inlet/outlet connection standards DIN (see note)
Installation type On-line
Installation configuration Stand-alone or in a group
Wetted seals Natural and nitrile rubber
Empty Full
Weight 1800kg 3000kg
Weight with accessories 2300kg 3500kg
Note: 4” to 8” manifolds are available upon request according to ASA 150, BSTE,
DIN, PN10, JIS K10 connection standards
MESH Branding 9.02 5750442
FILTRATION LTD.
Filtomat ® Automatic Water Filters
for Industry and Agriculture
5A Hatzoran St. P.O.B. 8242
New Industrial Zone
s Netanya South 42506, Israel.
r d s I n t it u t i o n
da Tel: (972-9) 8636656
an Fax: (972-9) 8636641
of
t
The S
Isra
SI E-mail: filtomat@filtomat.co.il
el
ISO
Q u
r m
9002
Fi
a l
t y d
i
A s s u r e