Professional Documents
Culture Documents
Elock 300 Installation Guide
Elock 300 Installation Guide
Magnet IMPORTANT!
Before power supply
is switched on set
the power selector
Sexnut jumper correctly
Armature Bolt
Rubber Washer
Swing Door 12VDC
24VDC
Steel Washer
elock Installation Manual 2 ( Convert to 24 Vdc operation )
1. Maglock with Filler Plate 2. Use Ellen Key M5 provided in EM 3. Use Ellen Key M5 to dismantle Bracket Screw
Lock Screw Set to dismantle Inter- at both end. The Filler Plate will then be removed.
Lock Screw at both end.