Professional Documents
Culture Documents
www.dril-quip.com
1
SS-15® Subsea Tie-Back System
2
Tie-Back to Floating Production
and Tension Leg Platform Systems
Features
•• DX® Wellhead Connector for high
preloaded production riser connection
•• Easy stab and make-up at high
misalignment angles
•• High bending and tension load capacity
•• High pressure capacity
•• All metal-to-metal seals with
resilient backup
•• Easily adapted to accommodate most
casing and production riser programs
•• Computer analyzed and gas tested
•• Available with mechanical or hydraulic
locking systems
•• Tie-back can be pressure-tested
•• Stab seal is field-replaceable
•• DX Wellhead Gasket can be pre-installed by
ROV prior to tie-back for rig time savings
•• Dual metal-to-metal sealing profile on
Tie-Back Connector gasket
•• Field-proven performance
3
Fewer components mean faster running time
4
13 3/8" Stab-In Tie-Back Tool 13 3 /4" Torque-and-Test
The Stab-In Tie-Back Tool is Tool
manufactured with a customer- The 13 3/4" Torque-and-Test Tool
specified casing thread on one end imparts final torque to preload
and a threaded split-lock ring on the 13 3/4" Stab-In Tie-Back Tool to
the other end. This threaded lock the subsea casing hanger and then
ring provides a simple weight-set test the seals on the Tie-Back Tool.
lock and rotation torque interface The 13 3/4" Torque-and-Test Tool
between the Tool and the subsea has three spring-loaded torque
casing hanger. A combination of keys on the main body. Seals are
resilient seals and a metal-to-metal located on the Tool to isolate the
seal is provided at the interface connection between the Stab-
between the Tie-Back Tool and In Tie-Back Tool and the casing
casing hanger I.D. hanger for testing.
Features
•• Establishes tie-back connection into
any of the subsea wellhead casing
hangers 10 3 /4" or 9 5/8" Stab-In Tie-Back Tool
(Annulus Monitoring)
•• Metal-to-metal and resilient seals for
pressure integrity The 10 3/4" Stab-In Tie-Back Tool has a 10 3/4"
•• I.D. torque slots allow engagement customer-specified casing connection in
of Torque Tool to energize metal the top and a threaded split-lock ring with
seal if necessary a metal-to-metal primary seal and resilient
backup seals on the bottom. The threaded lock
•• Connections — size and type are ring provides a simple weight-set lock and
customer-specified right-hand rotation torque connection between
the Tool and the subsea casing hanger. The
seal between the Tie-Back Tool and the casing
10 3 /4" or 9 5/8" hanger I.D. is a metal-to-metal seal with two
Torque-and-Test Tool O-ring backup seals. The split-lock ring on
the Tie-Back Tool locks the Tool to a right-hand modified
The 10 3/4" Torque-and-
acme thread located behind the Protective Sleeve in the
Test Tool is equipped
10 3/4" Annulus Monitoring Casing Hanger.
with torque keys on the
main body, test seals Features
and a 10 3/4" test cup
on the bottom of the •• Establishes tie-back connection
Tool. The Torque-and- into either the 10 3/4" or 9 5/8"
Test Tool imparts final subsea casing hanger
torque to preload the •• Metal-to-metal seals with
10 3/4" Stab-In Tie- resilient back up or pressure
Back Tool to the subsea integrity
casing hanger and then
•• I.D. torque slots allow engage-
tests the seal connection
ment of Torque Tool to energize
between the Tie-Back
metal seal if necessary
Tool and the 10 3/4"
casing hanger. •• Connections — size and type
are customer-specified
5
Choose from Dril-Quip’s full line
of surface completion systems for ...
6
Optimum compatibility and performance
Solid Block-Valve
Production Tree
Dril-Quip solid block
valves are a popular
choice for offshore plat-
form completions, where
conserving space and
minimizing leak paths are
important. Dril-Quip block
valves are manufactured
to API specifications.
Features
•• Offered in a range of sizes,
pressure ratings and trims
•• Production tree-to-wellhead
connection available with
flange, clamp hub, Dril-Quip
Stacked-Valve Production Tree Quik-Clamp or Radial
Bolt Connector
Dril-Quip offers surface produc-
tion trees utilizing a stacked-valve •• Completion system
configuration for land or platform components offered with
completion systems. The systems standard API connections or
are designed and assembled to meet customer specified connections
customer specifications. Both valves •• Component selection
and components are manufactured consistent with well
to meet API specifications. service specifications
7
Solutions for 10,000 PSI wells
Intermediate
Intermediate Tie-Back Adapter
Tie-Back Adapter
Production
Tie-Back Adapter
8
Round out the complete package —
Dril-Quip Template Systems
7
conductor-supported 8 4
4
8
8
•• Centerline-to-centerline centralization Template Systems. 9 5 1
1
9
5
•• All template systems can be remote 6 2 2
retrievable
2
6
2
•• Optional bumper-guide piles
3
3
•• Custom designed for a specific number 1
1
Bottom-Supported
•• Field proven Template System being
prepared for installation
Function-testing a Subsea
Template System
Spacer Template
Systems
The Dril-Quip Spacer Tem-
plate incorporates a modular
design concept that provides the flex-
ibility to accommodate last-minute changes in
the drilling program.
Top View (without wellheads installed) Side View (with wellheads installed)
9
Worldwide Sales & Service
DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP EASTERN HEMISPHERE DRIL-QUIP ASIA PACIFIC
DRIL-QUIP, INC. World Headquarters DRIL-QUIP (Europe), Ltd. DRIL-QUIP Asia Pacific Pte. Ltd.
6401 North Eldridge Pkwy. Stoneywood Park, Dyce No. 80 Tuas West Drive
Houston, Texas 77041 Aberdeen, Scotland, UK AB21 7DZ Singapore, 638417
Tel (713) 939 7711 Tel (44) 1224 727000 Tel (65) 6861 0600
Fax (713) 939 8063 Fax (44) 1224 727070 Fax (65) 6861 5700
DRIL-QUIP do Brasil, LTDA. DRIL-QUIP London DRIL-QUIP China
Macaé, Brazil High Wycombe, Shekou, P. R. China
Bucks, England Tel (86) 75 5268 97137
Tel (55) 22 2791 8950 Tel (44) 1494 601086 Fax (86) 75 5268 97134
Fax (55) 22 2791 8989 Fax (44) 1494 601094
DRIL-QUIP Oilfield Services
DRIL-QUIP New Orleans DRIL-QUIP Norway DRIL-QUIP Egypt (Tianjin) Co., Ltd.
New Orleans, Louisiana Stavanger, Norway Zahraa El-Maadi, Cairo, Egypt Tanggu, Tianjin, P. R. China
Tel (504) 522 5566 Tel (47) 51 443700 Tel (20) 22 753 8809 Tel (86) 22 2580 7466
Fax (504) 522 4426 Fax (47) 51 443701 Fax (20) 22 753 8907 Fax (86) 22 2580 7130
DRIL-QUIP The Netherlands Alexandria, Egypt DRIL-QUIP Malaysia
Beverwijk, The Netherlands Tel (20) 3 450 0507 Kuala Lumpur, Malaysia
Tel (31) 251 22 9250 Fax (20) 3 450 0508 Tel (60) 3 2168 4308
Fax (31) 251 22 0044 Fax (60) 3 2168 4201
DRIL-QUIP Nigeria, Ltd.
DRIL-QUIP Denmark Port Harcourt, Nigeria D.Q. Holdings Pty., Ltd.
Esbjerg, Denmark Tel (234) 84 463866 Perth, Australia
Tel (45) 7518 0944 Fax (234) 84 463649 Tel (61) 8 9322 8600
Fax (45) 7518 0640 Fax (61) 8 9322 8500
DRIL-QUIP (Ghana) Ltd.
Takoradi, Ghana DRIL-QUIP Qatar
Tel: (233) 312 5384 Doha, Qatar
Tel (974) 44389715
Fax (974) 44417041
DRIL-QUIP Indonesia
Jakarta, Indonesia
Tel (62) 21 720 0612
Fax (62) 21 720 1513
www.dril-quip.com