Professional Documents
Culture Documents
ANIL12TR00600AA 1
ANIL12TR01001AA 2
3. Remove the rotor fixed ring, the rotor and the inner
spacer.
4. Remove the two O-ring seals on the rotor fixed ring.
ANIL12TR01002AA 3
ANIL12TR01003AA 4
ANIL12TR01004AA 5
ANIL12TR01005AA 6
ANIL12TR01006AA 7
9. Position the control valve body and the rotor drive shaft
so that the sleeve-control shaft trim pin is in a horizontal
position.
10. Push the rotary valve inwards, so that the valve, the
valve seat sleeve and the thrust bearing can be ex-
tracted from the control valve body.
ANIL12TR01007AA 8
11. Extract the thrust bearing from the rotary valve, com-
plete with the two external rings. Remove the spring
retaining ring from the valve seat sleeve.
ANIL12TR01008AA 9
ANIL12TR01009AA 10
ANIL12TR01010AA 11
13. Extract the rotary valve from the valve seat sleeve.
ANIL12TR01011AA 12
ANIL12TR01012AA 13
15. Remove the dust seal and the O-ring seal from their
seats in the control valve body.
ANIL12TR01013AA 14
ANIL12TR01014AA 15
ANIL12TR01015AA 16
ANIL12TR01016AB 17
ANIL12TR01017AA 18
ANIL12TR01018AA 19