Professional Documents
Culture Documents
( Tutorial )
www.Vi3Dim.com
1.Vi3Dim software
To create 3d object from a simple web-cam
you need:
1.Vi3Dim software.
2.Web-camera.
3.Check-Board printed on A4 page.
4.Light.
5.Source object.
Algorithm:
www.Vi3Dim.com
1.Vi3Dim software
To create 3d object from a simple web-cam (running)
you need:
1.Vi3Dim software.
2.Web-camera.
3.Check-Board printed on A4 page.
4.Light.
5.Source object.
Algorithm:
www.Vi3Dim.com
1.Vi3Dim software
To create 3d object from a simple web-cam (running)
you need:
1.Vi3Dim software.
2.Web-camera.
3.Check-Board printed on A4 page.
4.Light.
5.Source object.
Z
Algorithm: Y
4)Place web camera in the right *spot.
*spot:
1.Proximally 30°-45° to axis X
2. whole check-board must be seen on
the Vi3Dim software screen. 30°-45°
X
6.Camera holder 5.Simple web camera 4.Desired object 2.Check-board 3.Additional lighting
(can be your hand) source (if need)
www.Vi3Dim.com
1.Vi3Dim software
To create 3d object from a simple web-cam (running)
with Vi3Dim software you need:
Algorithm:
5)Put your hand on the edge of the check-
board (try to not cover many of the black
squares with the hand).
www.Vi3Dim.com
*maybe more/less light required.
Group 1 :
File/Help
Left click on the (File) button to open a Submenu 1 Group 1
Submenu 1 :
Group 2 Group 6
Group 4
Group 5
Group 3
Submenu 2 :
1. F1-Help window
2. F-Full screen on/off
3. Q-Exit from the program
4. Enter-Make mesh with current settings.
5. W-view mode (solid, wire, points).
6. G-Anaglyph stereo on/off.
7. Esc-stop capture.
8. Mouse
9. Mouse left –rotate mesh
10. Ctrl+ mouse left- translate mesh
Working sequence:
1.Making check-board on A3/A4 page
(Menu-File->make check-board)
Save with some xxxx.doc name
Open xxxx.doc with ms-word and print it.
2.Put your object onto center of the printed page
Connect web camera (if not connected)
3.Press start capture button (Slow rotate the
page by your hand, camera must look at the
center of the page with angle about 45 degrees
you must see markers on check-board).
4.When you collect enough views please stop
capturing by press on the stop capture button.
Now you have raw data scanned in memory!
5.Wait for result.
6.You can change reconstruction parameters like
cube size- need make new Vertex set with “Make
new cube data:-take a long time
Change any of mesh parameters & press :make
new mesh” –several seconds
Programmer Dima, CEO Vitaly
www.Vi3Dim.com
Group 2 :
1.Scale 2.Solid 3.Wire 4.Point
Scale control Group 1
1.1 Scale button.
1.2 Scale ruler.
Left click on the zoom ruler and drag mouse Group 2 Group 6
(left/right) to zoom object (in/out)
Group 4
Left click on 1 of 3 buttons(Solid/Wire/Point).
1.Button (Solid) show full 3d mesh with texturing.
Group 5
Group 3
www.Vi3Dim.com
Group 3 :
1.Make new mesh 2.mesh_intes 3.mesh_line
4.mesh_tresh, mesh_reduce. Group 1
To make mesh:
When you click on the (stop capture ) button
Vi3dim will create first mesh with a default Group 2 Group 6
parameters. If you didn’t liked the results then :
Option 1: Group 4
1.1 Choose desired (mesh_intes) by Left click
mouse button on yellow circle and drag mouse Group 5
(left/right) to change the value. Group 3
1.2 Choose desired (mesh_line) by Left click
mouse button on yellow circle and drag mouse
(left/right) to change the value.
1.3 Choose desired (mesh_tresh) by Left click
mouse button on yellow circle and drag mouse
(left/right) to change the value.
1.4 Choose desired (mesh_reduce) by Left click
mouse button on yellow circle and drag mouse
(left/right) to change the value.
www.Vi3Dim.com
Group 4:
1.Make new cube data, 2.Vertex set cube size,
3.image Group 1
Make new cube data:
To create new cube data with other (Vertex set Group 2 Group 6
cube size) parameter left click mouse button on
yellow circle and drag mouse (left/right) to change Group 4
the value .
Then click on with left mouse on the (Make new
Group 5
cube data). Group 3
Maximum cube size for A4 page is 8
For a better results choose cube size that equal or
little bit bigger then desired object.
To check the desired object size just put object on
the check-board and count how many squares it
cover.
Image:
To see all good captured views from the raw data
left click mouse button on yellow circle and drag
mouse (left/right) to change the captured view’s
or spin mouse wheel.
www.Vi3Dim.com
Group 5:
1.Srart capture, Stop capture,640x480,320x240.
Group 1
Left click on the (Start capture ) will start capturing Group 2 Group 6
from the connected web cam.
Group 4
Left click on the (Stop capture) will stop capturing
from connected web cam and will start
Group 5
reconstruction/mesh creation process with the Group 3
default Cube size/Mesh parameters .
Group 6:
1.Make new texture.
Left click on the (Make new texture) will paste
texture on the object .
www.Vi3Dim.com
Additional options:
Option 1: Click on mouse left key on the mesh
and move mouse (up /down/left/right) to rotate Group 1
the mesh.
Option 2: Click on mouse left key +Ctrl on the
mesh and move mouse (up /down/left/right) to Group 2 Group 6
move the mesh on the screen area.
Option 3: F-Full screen. Group 4
Option 4: Q-Exit/quit.
Option 5: F1-Help. Group 5
Option 6: Enter-Make mesh. Group 3
Option 7: W-View mode.
Option 8: G-Anaglyph stereo on/off.
Option 9: Esc-Stop capture.
www.Vi3Dim.com
Vi3Dim Technologies
Contact us
Please, send any comments, bug reports and ideas to improve Vi3Dim !
We would like to know if you want more features?
Use this email (info@vi3dim.com) to contact us to get more information
about our company, products, or services.