Professional Documents
Culture Documents
(2016/09/23)
Contents
4. Add a camera...........................................................................................5
1
16. Set the local recording conditions.......................................................18
2. Click “Modify Password “, then pop-up a dialog named “ Modify password “, input the original password to modify
Eye4 account password. As shown below.
2
2. Retrieve the login Password
【Note; PC client can not retrieve the user account, if you forget the account number, please re-apply for registration
account】
2.1 In the login interface, click Recover to enter the retrieve password interface, input the Email
address to get the verification code, then click next, the mailbox will appear a verification code.
Note: Delay may occur, please wait.
2.2 enter the verification code and enter the new password ,Click Next to retrieve the Eye4 client login password.
【Special characters are not allowed, such as # ¥% & *, etc.】
3
3. How to upgrade the Eye4 client
4
3.2. If there is newer version, please upgrade,
Click the “check” button to check the latest client version, and upgrade to the latest
Eye4 version.
[Note: must upgrade in network status]
4. Add a camera
4.1 Adding a camera: Click [Add camera] to add, or click the “+” sign is to add, click the “-“ sign
is to delete, after adding the camera for the first time, the [Add Camera in the upper corner
disappears ,is replaced by the camera list
5
4.2 You can manually enter the UID, click [UID],can also automatically search add.
【Note: use local area network to search, cameras, computers, routers must be in the same LAN, the external
network can not use the LAN search method】
6
5. How to modify the camera name
5.1 How to modify the camera name: modify in the name bar. [Special characters are not allowed].
7.1. Click to tick [Flip Image], enable it, So that the image can flip.
8
8. How to set WiFi connection
8.1. How to set wifi connection: click on the “ set wifi “ , as shown below,
9
8.3. Click on Set, enter Wifi password , click OK. Unplug the network cable when the
camera restarts.
【Note】 WiFi configuration can be set in the LAN can also be set in the external network, LAN set up after the
unplug the cable, the external network does not affect the settings, the camera will automatically search to the
WiFi signal nearby.
10
9.2. Click on Camera parametersGetDate &time, choose Time Zone,Click to
tick Sync with NTP Server, NTP server select windows.save,
Note: According to the actual situation of different countries, select the corresponding urban areas, this function
is related to the SD card time calibration accuracy.
11
10.2. Click on camera parametersGetAlarmCheck to enable the Alarm triggers, enable
Detect Sensitivity,(the smaller the value, the more sensitive)Click Apply and OK
12
11.2.Click on Alarmingclick on to tick Enable Alarmclick Add,
【Note】 This feature is the client-side local motion detection video capture, save the computer client
installation folder, in the system settings to find the file location. Support for remote camera to set this function]
11.3. Click on Add, then appear the foll0wing picture, You can Select to
13
12. How to view the Alarm Log
12.2. Click Search key and click in the list of recording to view.
14
13. How to set SD card record
13.2 Camera ParametersSD Card Format GetClick to tick Record With24 hr.
15
Note: 1. If you can not detect the capacity after inserting the card, click "Format".
2. If not, please try to replace the card and confirm whether there are positive and negative sides of the card is
reversed. 3. Replace the SD card to try. 4. Judge is a hardware problem, please contact the dealer for replacement
16
[Note: 1. TF card does not support computer client download; 2. If the refresh can not appear after the video file, check
whether there is capacity display, check the card is normal]
17
16. Set the local recording conditions.
18
16.3 As shown in the picture below, set Recording Schedule Setup.
19
[Note; local video file size can be customized to change the video path can also be customized to maintain the
modified]
18.2 Click Search, then you can openselect by date, then view the local video file.
20
19. How to upgrade Firmware
21
Note: The upgrade takes about 2 minutes. Please ensure that the camera is powered on at this time. If the power
failure causes the camera to fail to upgrade, the camera will not start up any more. Contact your dealer to get
products.
22
21. How to set cruse line
21.1. First set several presets points, then click the camera real-time
23
21.3.In the cruise line 1 to add preset points, set the preset position an hold time ,a cruise line can
add up to 16 preset points.
24
21.4 In the Add Cruise interface, name can free to modify.
21.5. Select Cruise, click to tick call the special cruise when camera is
25
21.6. Select the cruise line to cruse. For example, choose the “cruse 1”.
26