Professional Documents
Culture Documents
Electronic joystick for Installation Machine VM-301 Diesel particle filter DPF – for Installation Machine
– Operation in optimum position VM-301 and VM-401
Electronic joystick with ergonomic arm support makes operat- An increasing number of building sites solely permits the use of
ing the VM-301 installation machine very much easier. machines with reduced emissions (e.g. Stuttgart 21).
z The multi-adjustable arm rest is fixed to the seat, so that the Reduced emissions are also advantageous when work is carried
position of the driver in relation to the joystick can be out in underground car parks.
maintained if the driving seat is moved z In stainless steel/aluminium casing with quick-release
z Significant reduction of force needed for operation fastener for easy changing of the filter cartridge
z Tilt of joystick can be adjusted through 2 axes z Separation rate > 97% of all particles
z Controls main gripping width, side gripping width, rotator z Authorisation/certificates: Vert certificate: check no.
as well as optional and vacuum lifting devices B175/12.05, regulations according to TRGS 554 are fulfilled
z Delivery contents: filter housing with integrated filter cartridge,
pressure switch, electronic evaluation system, installed ready
Type Description Order-Number
for use with supporting frame and perforated plate cover
Electronic joystick for controlling main gripping width, side grip- 4150.0820 Type Description Order-Number
for VM-301 arm rest ping width, rotator , as well as optional and
vacuum lifting devices (Retro-fitting available DPF Retrofit kit for VM-301-K, VM-301 and VM-203 4150.0784
only in the Probst works) Retrofit kit for VM-401 4150.0796
* Dependent upon the condition of the spacers and the quality of the stones. n Durable surface protection by galvanizing
www.probst-handling.com 3
Effective, clean stone
transportation and snapping
VTK-V-AR Access ramp for VTK-V 700 x 850 x 160 10 (22) 5110.0014 VTK-V with VTK-V-AR
(27½ x 33½ x 6¼")
Type n Hole distance min./max. Working Load Limit Dead Weight Order-Number
mm (in) WLL kg (Ibs) kg (Ibs)
BZSH 65 / 132 (2½"/ 5¼") 35 (75) 5 (10) 5180.0084 BSZH
* Gripping range indicates the minimum and maximum pack measurements n Durable surface protection by galvanizing ** depending on gripping range
of building materials, which can be picked-up with this grab
www.probst-handling.com 5
Pat ent
The vacuum power-pack er m a n
ing
G
for heavy loads Work mit
L i
Load kg
600
lease operations, enabling single-operator activation from SM-SPS-600-95/34 950 x 340 (37½ x 13¼") 600 (1,320) 15 (33) 4272.0349
the carrying device
Typen Suction Plate Working Load Working Load Order- Type Power Working Load Dead Weight Order-
Dimension mm (in) Limit WLL*** Limit WLL* Number Limit WLL *** (without suction Number
kg (Ibs) kg (Ibs) kg (Ibs) plate) kg (Ibs)
SPS-3500(2300)-174/92 1,740 x 920 (68½ x 36") 3,500 (7,700) 2,300 (5,100) 4240.0555 SH-3500-B petrol engine 3,6 kW 3,500 (7,700) 180 (395) 5240.0041
Wheelset SH-3500-RS for SH-3500-B 4250.0256
* Value at 400 mbar low pressure ** Value at 500 mbar low pressure Support feet for SH-3500-B 4240.0579
***Value at 600 mbar low pressure Remote Control for gripping and releasing 4240.0578
(Retro-fitting available only in the Probst works)
n Durable surface protection by galvanizing
z Suction box with stuck-on sponge rubber mat. FSP-150-56/61 560 x 610 (22 x 24") 150 (330) *** 4211.0017
FSP-150-82/20 820 x 200 (32¼ x 7¾") 150 (330) *** 4211.0004
The foam rubber layer can be changed without taking too
much time.
(Careful handling of the vacuum seal is essential)
FSP-150-82/20
** Caution: It is forbidden to use the suction plates with a smaller working load limit than the lifting unit HE!
It is permissible to use suction plates with a higher working load limit than the lifting unit.
www.probst-handling.com 7
Safely Grip and Position
Barrier Walls
The use of additional element types must be tested, and this can be
requested.
The use of additional element types must be tested, and this can be
requested.
www.probst-handling.com 9
Lift manhole covers easily – move
pre-cast concrete parts for road
gullies safely
Manhole Cover Lifter SDH-M-10 – releases even
seized manhole covers very easily and with
SDH-M-10-LHM-400
little force
For laying concrete sections for road gullies (base and intermediate
sections) in accordance with DIN 4052 with diameter Ø 550 mm.
z Also suitable for sleeve sections of external size 625 mm
z One-man operation due to adjustable lock position in hanging
eye for releasing the product
z With oval ring, can be used as a supporting surface and handle
www.probst-handling.com 11
Probst gets things moving – innovative, efficient and ergonomic
…in transportation
Printed in Germany
Headquarter Erdmannhausen
Probst GmbH
Gottlieb-Daimler-Straße 6, 71729 Erdmannhausen, Germany
Phone +49 7144 3309-0, Fax +49 7144 3309-50
info@probst-handling.com
Art.-Nr. 29020570 / New Products 2016 / 0316 / uk
Subsidiary in France
Probst SAS
8 rue de l‘Èglise
57370 Saint Jean Kourtzerode
Phone +33 3 87 07 19 52 • Fax +33 3 87 07 39 85
info@probst-handling.fr • www.probst-handling.fr
www.probst-handling.com