You are on page 1of 8

ONLY TRAINNED PERSONEL ARE ENCOURAGED TO LOGON INTO LIVE

EQUIPMENT. THE AUTHOR IS NOT BOUND TO ANY LEGAL PROCEEDINGS


TO THOSE EXPERIMENTING WITHOUT PROPER TRAINNING

ZTE SDR LOGIN


This paper simply illustrates the basic procedures to log into Zhongxing Telecommunication
Equipment (ZTE) Software Defined radio (SDR) using the local craft terminal or in simpler
terms using a local terminal like laptop or desktop.
The procedures are written on assumptions that the software setup is already installed on the
local terminal otherwise refer to the author (details underneath) for setup installation on your
local terminal or on his paper that deals with the setup installations.
The procedures were written presumably on ZTE SDR VERSION 12.14.51B44 and WIn 7 as
below
BASIS SYSTEM LOGG IN
Connect your Ethernet cable on your lct FE port to the SDR DEBUG port (in some instance
ETH0 or ETH1 depending on original configuration)
Change your network settings of your laptop into same domain to that of the SDR radio
Start – Control Panel – Network and Internet – under Network and Sharing Center – double click
view network status and tasks
Double click Change adaptor settings on your left
Double click the local area connection and on highlight Internet Version 4 (TCP/IPV4) – click
properties – click the radio button use the following IP address and insert the address as shown:

Please note the host portion is any number (n) different from that of the CC card to be logged on
but same domain, click ok and close the windows, you are now ready to launch the LMT
LAUNCH LMT START

Click start
If there is no station, click station, add station, under station name write CC1, station IP
192.254.1.16 and gateway in same subnet eg 192.254.1.(17) assuming that you have one CC
card, otherwise if second CC card its .17 on the host part of the address

Click ok
A window as below will appear

Username Name input root, leave password blank, then ok

You can then launch EOMS or EFMS, or EDMS by clicking the corresponding on the menu bar
for example EOM
EOMS
Double click icon with spanner and pen crossed on menu bar and you are done, you can then
play around with the others as per your requirements

O
Please note this paper have been written by the author Cecil Chiinze on his own using his vast
experience and knowledge working on telecommunication systems and PROJECTS. The aim as
to share knowledge to others. He has more such papers on different equipment and trending
technologies. Cecil Chiinze can be contacted on chinzececil@yahoo.co.uk or
0772425434/0732135198 for further consultancy works. You can also obtain the information on
https://www.zte.com.cn/global/

You might also like