Professional Documents
Culture Documents
Outside Diameter
Nominal Size Inside
[mm]
Diameter
[mm] Class Class Class Class Class
NPS DN
150 300 400 600 900
1/2 15 21 48 54 54 54 64
3/4 20 27 57 67 67 67 70
1 25 33 67 73 73 73 79
1 1/4 32 42 76 83 83 83 89
1 1/2 40 48 86 95 95 95 98
2 50 60 105 111 111 111 143
2 1/2 65 73 124 130 130 130 165
3 80 89 137 149 149 149 168
3 1/2 90 102 162 165 162 162 -
4 100 114 175 181 178 194 206
5 125 141 197 216 213 241 248
6 150 168 222 251 248 267 289
8 200 219 279 308 305 321 359
10 250 273 340 362 359 400 435
12 300 324 410 422 419 457 498
14 350 356 451 486 483 492 521
16 400 406 514 540 537 565 575
18 450 457 549 597 594 613 638
20 500 508 606 654 648 683 699
24 600 610 718 775 768 791 838
26 650 660 775 835 832 867 -
28 700 711 832 899 892 914 -
30 750 762 883 953 946 972 -
32 800 813 940 1006 1003 1022 -
Some sizes may not be available for some GORE®Gasketing products 1 in. = 25.4 mm
Tolerances:
Inside Diameter: Outside Diameter:
For NPS 12 and smaller: +/- 1.5 mm For NPS 12 and smaller: + 0 / - 1.5 mm
For NPS 14 and larger: +/- 3.0 mm For NPS 14 and larger: + 0 / - 3.0 mm
SEAL-124-R2-TEC-US-MAR17
All technical information and advice given here is based on our previous experiences and/or test results. We give this information to the best of our knowledge, but assume no legal responsibility.
Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Specifications are subject to change without notice. Gore's terms and conditions of sale apply to the purchase and sale of the product.
GORE and designs are registered trademarks of W.L. Gore & Associates, © 2013-2017 W.L. Gore & Associates, Inc.
GORE® Sealant Technologies
Gasket Dimensions according to ASME B16.21-2005
Some sizes may not be available for some GORE® Gasketing products 1 in. = 25.4 mm
Tolerances:
Inside Diameter: Outside Diameter:
For NPS 12 and smaller: +/- 0.06 in. For NPS 12 and smaller: + 0 / - 0.06 in.
For NPS 14 and larger: +/- 0.12 in. For NPS 14 and larger: + 0 / - 0.12 in.
SEAL-124-R2-TEC-US-MAR17
All technical information and advice given here is based on our previous experiences and/or test results. We give this information to the best of our knowledge, but assume no legal responsibility.
Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Specifications are subject to change without notice. Gore's terms and conditions of sale apply to the purchase and sale of the product.
GORE and designs are registered trademarks of W.L. Gore & Associates, © 2013-2017 W.L. Gore & Associates, Inc.
GORE® Sealant Technologies
Gasket Dimensions according to ASME B16.21-2005
NOTE: Class 300 Dimensions per B16.5-2003. NPS 26- NPS 32 Class 150 & Class 300 Dimensions per B16.47
All technical information and advice given here is based on our previous experiences and/or test results. We give this information to the best of our knowledge, but assume no legal responsibility.
Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Specifications are subject to change without notice. Gore's terms and conditions of sale apply to the purchase and sale of the product.
GORE and designs are registered trademarks of W.L. Gore & Associates, © 2013-2017 W.L. Gore & Associates, Inc.
GORE® Sealant Technologies
Gasket Dimensions according to ASME B16.21-2005
NOTE: Class 300 Dimensions per B16.5-2003. NPS 26- NPS 32 Class 150 & Class 300 Dimensions per B16.47
All technical information and advice given here is based on our previous experiences and/or test results. We give this information to the best of our knowledge, but assume no legal responsibility.
Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Specifications are subject to change without notice. Gore's terms and conditions of sale apply to the purchase and sale of the product.
GORE and designs are registered trademarks of W.L. Gore & Associates, © 2013-2017, W.L. Gore & Associates, Inc.