Professional Documents
Culture Documents
MONOLEC®
Synthetic Industrial Oils
Extends oil drain intervals, reduces wear and oil consumption, and
practically eliminates deposits and sludge formation – designed
for equipment operating at extreme temperatures.
LE's MONOLEC Synthetic Industrial Oils are completely 100% synthetic oils and have been carefully formulated
to exceed all requirements for air compressors, vacuum pumps and hydraulic systems operating at above and
below normal temperatures.
Their sophisticated formulas contain a blend of very high VI synthetic base oils, in addition to MONOLEC, LE’s
exclusive wear-reducing additive. Their specially developed additive package, designed solely for synthetic oils,
contains an anti-wear compound which acts synergistically with MONOLEC to control wear as pressures and
temperatures rise. In addition rust and oxidation inhibitors and a foam suppressant have been added to complete
the package.
;lk;lk
USER BENEFITS:
Far Less Oil Used
• Greatly Extended Drain Intervals – Completely synthetic • Cooler, Cleaner Operation – With far less carbon deposits,
formulations deliver longer effective oil life versus sludge and almost no varnish formation the entire system
competitive oils as a result of the oxidation resistance. stays clean, runs cooler and the oil and filter life are greatly
extended. A foam inhibitor helps lower operating
• Less Make-Up Oil Required – The completely synthetic temperatures and insures positive, uniform power flow in
formulations have low volatility to reduce oil consumption hydraulic systems. Excellent rust protection is due to the
and carry-over into the air system. special rust inhibitors which are incorporated in these
Longer Equipment Life and Greater Equipment Reliability – MONOLEC oils.
Will reduce capital expenditures and operating budgets in Lower Maintenance Costs and Reduced Downtime – This is
many areas. achieved with far less oil used, less deposits to clean out, and
• Reduced Wear – With the triple protection of the oil’s fewer repairs or replacement parts and labor.
tough film strength, MONOLEC, LE’s exclusive wear- Improved Equipment Efficiency – Equipment which operates
reducing additive and special anti-wear additives. This cooler and cleaner. Easy cold weather starts (-38°F to -65°F
reduced wear occurs even when compared with other pour points) and high temperature limits which are fully 100°F
synthetic and petroleum oils. above petroleum oils.
• Eliminates Carbon Deposits – Because they are Excellent Compatibility – With seals, plastics and other lubricants
synthetic oils which will not oxidize like petroleum oils, to make conversion to LE’s MONOLEC Synthetic Industrial
these oils contain no petroleum to form hard carbon Oils easy.
deposits which can impede heat transfer and possibly
cause compressor receiver explosions. In fact, the 9032 – ISO 32 9100 – ISO 100
potential for fires and explosions is significantly less than 9046 – ISO 46 9150 – ISO 150
with petroleum oils. 9068 – ISO 68
LEADERS IN LUBRICANTS
300 Bailey Ave• FORT WORTH, TEXAS • 817-834-6321 • FAX 817-834-2431 • http://www.le-inc.com
DESCRIPTION:
Pure 100% synthetic oils, compounded with anti-wear additives as well as other additives to provide reduced
wear, low deposit forming tendency, outstanding oxidation and water resistance. These lubricants provide
excellent compatibility with seals. Contains MONOLEC®, LE's exclusive wear-reducing additive.
PHYSICAL CHARACTERISTICS—TYPICAL:
APPLICATION:
Rotary air compressors and vacuum pumps. Reciprocating air compressors and reciprocating vacuum pumps.
Can be used as circulating oil, hydraulic oil and in many low temperature and high temperature non-EP
applications. AGMA R & O Gear Oil. Can also be used in low temperature and high temperature fluid power
drives.
300 Bailey Ave • Fort Worth, Texas 76107 LE PRODUCTS MANUFACTURED UNDER AN
817-834-6321 • 800-537-7683 • fax 817-834-2431 ISO 9001:2000 CERTIFIED QUALITY SYSTEM
http://www.le-inc.com
BENEFICIAL QUALITIES:
Exceptionally long life oil. Delivers five to eight times longer service life than petroleum oils.
USDA H2.
Special anti-wear additive controls corrosive and scuffing wear. Assures longer life for bearings.
Best rust protection. Additive “plates out” to seal off metal surfaces from moisture.
Much less labor cost for changing oil and cleaning systems. Less downtime. Reduced oil disposal cost.
Extremely high natural Viscosity Index. Less change in viscosity as temperature changes.
Less makeup oil required due to the low volatility of these oils.
Cooler, cleaner operation—a result of fewer carbon deposits, much less sludge and almost no varnish
formation.
CHANGEOVER PROCEDURES:
To realize the full benefits of LE's MONOLEC® Synthetic Industrial Oils, certain routine procedures are
recommended when changing over a compressor from another type of lubricant. These procedures are
required because of the excellent cleaning action which tends to dissolve, loosen and remove any existing
deposits. Basically all compressor and downstream parts which will be in contact with these superior oils
should be as clean as practical before the changeover. Detailed changeover procedures are available
upon request.
LI50049
Rev. 06-01
SS040501
TDBS\9032-9150